Instrukcja obsługi Vizualogic VL8000 Series

Streszczenie treści zawartej na stronie nr. 1

Visor Installation
1. Disconnect the vehicle’s negative battery terminal. (Black wire)
2. Please see Visor Removal Instructions to remove the passenger side visor.
3. Remove the ‘A’ pillar trim and kick panel on the passenger side and route the Video
Cable and Ground Wire around the front edge of the headliner and across to the ‘A’.
4. Install the visor monitor and mounting brackets to the headliner by reversing the Visor
Removal Instructions.
5. Route the Video Cable and Ground Wire down the ‘A

Streszczenie treści zawartej na stronie nr. 2

VL8000 Kit contents: Visor Removal Instructions (2) Batteries, AAA (1) Visor with Monitor and Cable (1) VL8000 Installation Manual (1) A/V Module (1) VL8000 Owner’s Manual (1) 12V Harness for A/V Module (1) Remote Control 1. Use a small blade screwdriver 2. With the screwdriver in the 3. Pushing up on the visor will 12V Power Installation to insert in access slot to slot, push the elbow of the release it form the roof header. We recommend the installation of a main power switch for the entire he