Streszczenie treści zawartej na stronie nr. 1
®
ViewSonic
VX1945wm
LCD Display
Model No. : VS11444
Streszczenie treści zawartej na stronie nr. 2
Contents Compliance Information.............................................................................. 1 Important Safety Instructions...................................................................... 2 Declaration of RoHS Compliance............................................................... 3 Copyright Information ................................................................................. 4 Product Registration................................................................
Streszczenie treści zawartej na stronie nr. 3
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec
Streszczenie treści zawartej na stronie nr. 4
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions. 7. Do not block any ventilati
Streszczenie treści zawartej na stronie nr. 5
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% M
Streszczenie treści zawartej na stronie nr. 6
Copyright Information ® Copyright © ViewSonic Corporation, 2006. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards As
Streszczenie treści zawartej na stronie nr. 7
Getting Started ® Congratulations on your purchase of a ViewSonic LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me (Millennium), Windows XP, and Windows Vista. Package Contents Your LCD display package includes: • LCD display • 2 in 1 audio cable * 1 • Power cable (for monitor) • iPod ada
Streszczenie treści zawartej na stronie nr. 8
Quick Installation 1. Connect power cord (and AC/DC • Wait for the CD-ROM to auto-start. adapter if required) NOTE: If the CD-ROM does not auto- start: double-click on the CD-ROM icon in 2. Connect video cable the Windows Explorer, then double-click • Make sure both the LCD display and on viewsonic.exe. computer are turned OFF • Follow the on-screen instructions. • Remove rear panel covers if necessary 5. Windows users: Set the timing mode • Connect the video cable from the LCD (resolution
Streszczenie treści zawartej na stronie nr. 9
TM ViewDock Connecting to PC Use the supplied cables to connect the ViewDock to your PC. Refer to the following illustration: Step 1. Please check your USB cable (A-B type) Step 2. Connect the USB cable from PC (A type) to the ViewDock (B type) Step 3. Plug in the power adaptor into the DC jack. Step 4. Connect the stereo audio cable from audio-out of ViewDock base to audio-in of monitor panel head. Step 5. Connect the 2-in-1 audio cable from audio-in of ViewDock to audio-out / MIC-in of PC. St
Streszczenie treści zawartej na stronie nr. 10
Wall Mounting (Optional) ® To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk- mounted to a wall-mounted display, do the following: 1. Verify that the Power button is turned Off, then Four VESA screw holes disconnect the power cord. 2. Lay the LCD display face down on a towel or blanket. 3. Remove the Plastic Covers from the back of the LCD display. 4. Remove the four
Streszczenie treści zawartej na stronie nr. 11
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1440 x 900) and refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the OSD (On-screen Display) controls to adjust the screen image. For the best picture quality set your LCD display timing mode to: VESA 1440 x 900 @ 60Hz. To set the Timing Mode: 1. Se
Streszczenie treści zawartej na stronie nr. 12
Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. The OSD controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 12. Main Menu with OSD controls Front Control Panel shown below in detail Standby Power On/Off Displays the control screen for Power light the highlighted control. Blue = ON Also toggles between two controls on some screens. Orange = Power Saving Also a
Streszczenie treści zawartej na stronie nr. 13
Do the following to adjust the display setting: 1. To display the Main Menu, press button [1]. NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control to adjust, press or to scroll up or down in the Main Menu. 3. After the desired control is selected, press button [2]. A control screen like the one shown below appears. The command line at the bottom of the control s
Streszczenie treści zawartej na stronie nr. 14
Main Menu Controls Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Image Adjust sizes and centers the screen image automatically. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Input Select toggles between inputs if you have more than one computer connected to the VX1945wm. Audio Adjust Volume increases the volume, decreases
Streszczenie treści zawartej na stronie nr. 15
Control Explanation sRGB-This is quickly becoming the industry standard for color management, with support being included in many of the latest applications. Enabling this setting allows the LCD display to more accurately display colors the way they were originally intended. Enabling the sRGB setting will cause the Contrast and Brightness adjustments to be disabled. 9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 7500K - Adds bl
Streszczenie treści zawartej na stronie nr. 16
Control Explanation Manual Image Adjust Sub-menu H. Size (Horizontal Size) adjusts the width of the screen image. H./V. Position (Horizontal/Vertical Position) moves the screen image left or right and up or down. Fine Tune sharpens the focus by aligning text and/or graphics with pixel boundaries. NOTE: Try Auto Image Adjust first. Sharpness adjusts the clarity and focus of the screen image. Setup Menu displays the menu shown below: Language Select allows the user to choose the language used in
Streszczenie treści zawartej na stronie nr. 17
Control Explanation Resolution Notice allows the user to enable or disable this notice. If you enable the Resolution Notice shown above and your computer is set at a resolution other than 1440 x 900, the following screen appears. OSD Position allows the user to move the OSD menus and control screens. OSD Timeout sets the length of time the OSD screen is displayed. For example, with a “30 second” setting, if a control is not pushed within 30 seconds, the display screen disappears. OSD Backgrou
Streszczenie treści zawartej na stronie nr. 18
TM ViewDock Key Features Features The VX ViewDock comes with the following advanced features: • 4-port USB 2.0 hub (USB 1.1 compatible) • 8-in-1 card reader (SD, MMC, MS, MS Pro, CF I & II, MD, SMC) • 3-watt subwoofer support • iPod docking & charging • Headphone jack and built-in microphone System requirements For optimal use with the ViewDock, the computer should have the following minimum system requirements: Hardware requirements • Pentium 200 CPU or higher • CD-ROM for driver installation •
Streszczenie treści zawartej na stronie nr. 19
Physical Description Please refer to the following illustrations to identify the components of the ViewDock. Front View Sub-Woofer iPod connector USB Hub Power Phone Jack Volume Control MIC Rear view USB Hub Audio In Power Jack Card Reader Audio Out USB Connector ViewSonic VX1945wm 17
Streszczenie treści zawartej na stronie nr. 20
Card Reader Installation Refer to the following information After connecting the ViewDock to your PC, Windows File Manager will show 4 extra icons. Step1. Please check your card socket Step2. Insert your memory card. Each slot of the card reader will be recognized as a Removable Disk and the icon will be shown in "My Computer" of Windows You do not need to install any special drivers for the Card Reader if your OS is Windows 2000/ ME/XP. Card reader Installation guide for Windows 98SE : (Plea
