Streszczenie treści zawartej na stronie nr. 1
MultiSync PA241W
User’s Manual
Streszczenie treści zawartej na stronie nr. 2
Index Warning, Caution ..........................................................................................................................English-1 Declaration ...................................................................................................................................English-1 Canadian Department of Communications Compliance Statement .............................................English-2 Declaration of Conformity ....................................................
Streszczenie treści zawartej na stronie nr. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNI
Streszczenie treści zawartej na stronie nr. 4
Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specifi ed cables with the MultiSync PA241W color monitor so as not to interfere with radio and television reception. (1) The power supply cord you use must hav
Streszczenie treści zawartej na stronie nr. 5
Setup Manual Product Features � DisplayPort, which supports 10-bit color depth. � 5-setting, easy-to-switch picture mode (see page 11). � Accurate color reproduction for high-end graphic design (see page 11). � Quick warmup time. � Picture-in-picture/picture-by-picture dual-screen mode includes real-time preview (see page 21). � USB hub with two upstream ports. � MultiProfi ler extends color management feature, including automatic ICC profi le updates (ICC profi le Emulation, Printer Emulation) (s
Streszczenie treści zawartej na stronie nr. 6
Quick Start To connect the LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For a PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For a PC with Analog output: Connect a 15-pin mini D-SUB to DVI-A signal cable (not included) to the connector of the display card in your system (Figure A.2). For a MAC: Connect a Macintosh cable adapter (not inclu
Streszczenie treści zawartej na stronie nr. 7
4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor. NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module
Streszczenie treści zawartej na stronie nr. 8
7. Slide down the cable cover (Figure D.1). 8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet. NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. Figure D.1 9. Turn on the monitor with the front power button (Figure E.1) and the computer. 10. No-touch auto adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further adjustments, use the
Streszczenie treści zawartej na stronie nr. 9
Screen Rotation Before rotating, the screen must be raised to the highest level and tilt to avoid knocking the screen on the desk or pinching your fi ngers. Disconnect all cables. To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter- clockwise from Portrait to Landscape (Figure R.1). To rotate OSD menu between landsca
Streszczenie treści zawartej na stronie nr. 10
Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a non-abrasive surface (Figure S.1). 4. Place one hand around the base and one hand on the Quick Release Lever. Push and hold the Quick Release Lever in the direction indicated by the arrows (Figure S.1). 5. Lift up the stand to unhook it from the monitor (Figure S.1). T
Streszczenie treści zawartej na stronie nr. 11
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: To access OSD menu, press the MENU button. To change signal input, press the SELECT button. NOTE: OSD must be closed in order to change signal input. 8 7 Landscape 9 Portrait 1 2 3 4 5 6 1 AUTO DIMMING Detects the level of ambient lighting allowing the monitor to make adjustments to various SENSOR settings resulting in a more comfortable viewing experience. Do not cover this sensor. 2 Power Turn
Streszczenie treści zawartej na stronie nr. 12
Brightness/Contrast Controls BRIGHTNESS Adjusts the overall image and background screen brightness. NOTE: The brightness level is adjusted using the backlight output. The display will digitally compensate for low or high brightness levels. If digital compensation occurs, the brightness value on the OSD will change to magenta. NOTE: The optimal display performance will be in the range where the OSD brightness value is black. When the display cannot achieve the desired brightness, the numer
Streszczenie treści zawartej na stronie nr. 13
FINE (Analog input only) Improves focus, clarity and image stability by increasing or decreasing this setting. If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fi ne tuning can be performed using the “Fine” function. For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like the left drawing. The image should be homogeneous. When FINE value is When FINE value is wrong. correct. AUTO
Streszczenie treści zawartej na stronie nr. 14
PIP INPUT Selects the PIP input signal. PIP LEFT/RIGHT When you select “PIP” in PIP MODE, you can control horizontal position of PIP display area. PIP DOWN/UP When you select “PIP” in PIP MODE, you can control vertical position of PIP display area. PIP SIZE Selects the size of the sub-picture used in PIP mode. USB SELECTION Change USB upstream input, 1 or 2. When connecting a computer to each of the upstream ports, the monitor's USB downstream ports can be used by selecting this setting for the
Streszczenie treści zawartej na stronie nr. 15
OSD DOWN/UP You can choose where you would like the OSD control image to appear on your screen. Selecting OSD Location allows you to manually adjust the position of the OSD control menu Up or Down. OSD TURN OFF The OSD control menu will stay on as long as it is use. You can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10-120 seconds by 5-second increments. OSD LOCK OUT This control completely locks out access to all
Streszczenie treści zawartej na stronie nr. 16
Information Provides information about the current resolution display (Main picture), current USB input setting and technical data including the preset timing being used and the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor. OSD Warning OSD Warning menus disappear with EXIT button. NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on or when there is a change of input signal, the No Sig
Streszczenie treści zawartej na stronie nr. 17
Using the PICTURE MODE function Choose the Picture mode that is most suitable for the type of content that is shown. ® There are ten types of mode (sRGB, Adobe RGB, DCI, REC-Bt709, HIGH BRIGHT, FULL, DICOM, PROGRAMMABLE). � To access the Picture mode, press Reset button while OSD menu is not showing. � Each PICTURE MODE includes BRIGHTNESS, WHITE, Color Gamut, GAMMA, BLACK, UNIFORMITY, COLOR VISION EMU, METAMERISM, RESPONSE IMPROVE settings. You can change these settings in Tag1 advanced menu.
Streszczenie treści zawartej na stronie nr. 18
Advanced OSD If you need detailed information about the controls, please use the advanced menu. There are 2 ways for using the advanced menu. Way 1: � Press the Menu button to access OSD menu. Use the front buttons to move the cursor to the ADVANCED SETTING in Color control systems. Press INPUT button to appear advanced menu. � Press the EXIT button. Way 2: � Turn off your monitor. � Turn on your moni
Streszczenie treści zawartej na stronie nr. 19
GAMMA Allows you to manually select the brightness level of grayscale. There are fi ve selections: sRGB, L Star, DICOM, PROGRAMMABLE and CUSTOM. We recommend to show grayscale image data on screen. sRGB: GAMMA setting for sRGB. L Star: GAMMA for Lab color space. DICOM: DICOM GSDF (Grayscale Standard Display Function) is possible for medical imaging. PROGRAMMABLE: The brightness of grayscale can be changed to your preference by downloading the application software. CUSTOM: Below items can be a
Streszczenie treści zawartej na stronie nr. 20
Tag2 Sharpness This is a digital capability for keeping a crisp image at all signal timings. It continuously adjusts to maintain as distinct or as soft image as you prefer, and is set independently according to different timings. Press “Left” or “Right” to adjust. Response Improve Turns the Response Improve function on or off. Response Improve may reduce blurring that occurs in some moving images. ECO Mode Decreases the amount of power consumed by reducing the brightness level. OFF: No funct
