Streszczenie treści zawartej na stronie nr. 1
TM
®
MultiSync LCD1920NX
Streszczenie treści zawartej na stronie nr. 2
Index Warning .................................................................................................................... 1 Getting Started..................................................................................................... 2 Adjusting the Monitor ......................................................................................... 3 Quick Installation ................................................................................................. 4 Operations ....
Streszczenie treści zawartej na stronie nr. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Streszczenie treści zawartej na stronie nr. 4
Getting Started Congratulations on your purchase of this LCD Monitor. Please read this section carefully to get an instant understanding of this product and its correct operations. Important! Please keep the original carton and all packing materials for future shipping needs. Package Contents Your LCD Monitor package includes the following items: • 19” LCD Color Monitor • Signal cable with 15 pin D-Sub connector • AC Adapter • Power cord • User’s Manual Unique Features • 8-bit panel, supporting
Streszczenie treści zawartej na stronie nr. 5
Adjusting the Monitor Press down on the stand and gently adjust the monitor to a suitable viewing angle (see Figure below). Please note that this monitor can only be tilted forward to 5 degrees, backward to 20 degrees, and swiveled 90 degrees left/right. To prevent damage to the monitor, do not press the screen over its tolerant angles. 20° 90° 5° 90° 3
Streszczenie treści zawartej na stronie nr. 6
Quick Installation • Make sure the computer is turned off. • Attach the female end of the power cord (Indication E) to the AC adapter (Indication D), then plug the AC adapter connector to the power “DC-IN (Indication A)” jack of the LCD monitor. • When using a power cord, plug the male end into the wall socket. • Plug one end of the 15 pin D-SUB signal cable (Indication F) in the “D-SUB” video signal connector (Indication B) of LCD monitor. If using a digital signal, plug one end of the 24 pin D
Streszczenie treści zawartej na stronie nr. 7
Quick Installation –continued Remove Monitor Stand for Mounting Non-abrasive surface To prepare the monitor for alternate mounting purposes: 1.Disconnect all cables. 2.Place monitor face down on a non-abrasive surface (Figure R.1). 3.Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.1). The monitor is now ready for mounting in an alternate manner. 4.Connect the AC cord and signal cable to the back of the monitor. Figure R.1 5. Reverse this process
Streszczenie treści zawartej na stronie nr. 8
Operations To turn the monitor on or off, push the power button (Indication E) on the front of the monitor. When the power light (Indication F) turns green, the LCD is ready to use. F A B C D E Function Keys A. MENU 1. Press this button to turn on the OSD (On Screen Display) main menu. 2. Press this button to activate selected items. 3. Press this button 2 seconds or more to turn off the main menu. B. [–] 1. To scroll down the menu. 2. To decrease the value of selected item. C. [+] 1. To scroll
Streszczenie treści zawartej na stronie nr. 9
OSD Main Menu For screen adjustments, press the [MENU] button to display the OSD (On-Screen Display) Main Menu shown below. Press the [+] or [–] button to scroll up or down the menu to your required options. Please note that the OSD will automatically turn off in 30 seconds without any manipulation or by simply pressing the [MENU] button for 2 seconds. CONTRAST: Adjusts the contrast level of the screen image. Under Main Menu, select CONTRAST using the [+] or [–] button, then press [MENU] button
Streszczenie treści zawartej na stronie nr. 10
OSD Main Menu –continued LCD ADJUST Sub-Menu (Analog input only): Under the Main Menu, select LCD ADJUST using the [+] or [–] button, then press [MENU] button to enter LCD ADJUST Sub-Menu. PC/MAC: Switching between PC at 800X600 resolution and MAC at 832X624 resolution, using [+] or [–] button. Then press [MENU] to initiate the switch between PC and MAC shown as above. H SIZE: Adjusting the width of the screen image. Select H-SIZE, using [+] or [–] button, then press [MENU] button to activate th
Streszczenie treści zawartej na stronie nr. 11
OSD Main Menu –continued MISC Sub-Menu Under the Main Menu, select MISC using the [+] or [–] button, then press [MENU] button to enter MISC Sub-Menu. RESOLUTION NOTIFIER: This optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024. H-OSD POSITION: Moves the OSD position on the screen to the right or left. Select H-OSD POSITION using [+] or [–] button, then press [MENU] button to activate
Streszczenie treści zawartej na stronie nr. 12
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabin
Streszczenie treści zawartej na stronie nr. 13
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. Th
Streszczenie treści zawartej na stronie nr. 14
Specifications ® ™ Monitor MultiSync LCD1920NX Specifications Monitor LCD Size 19.0" (full 19.0" viewable diagonal area) Type TFT (Thin Film Transistor), Active Matrix Panel 0.294mm pixel pitch Color Filter RGB Vertical Stripe Glass surface Anti-Glare Maximum Left/right 85°/85° Viewing Angles Up/Down 85°/85° Input Signal Video Sync RGB Analog (0.7/1.0 Vp-p, 75 ohms) DVI-D (100 ohms) Separate Sync, Composite Sync Fh: 31.5-80 kHz, Fv: 56-75 Hz Compatibility PC Up to 1280 x 1024 Non-interlaced (NI)
Streszczenie treści zawartej na stronie nr. 15
Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another. ® AccuColor Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. OSD (On-Screen Display) Controls: Allow you to quickly and easily adjust all elements
Streszczenie treści zawartej na stronie nr. 16
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check the LED of AC adapter is ON. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card wi
Streszczenie treści zawartej na stronie nr. 17
References • BBS (978) 742-8706 NEC-Mitsubishi Electronics Display of America Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communica- tion parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: Internet e-mail: tech-support@necmitsubishi.com Internet ftp site: ftp.necmitsubishi.com World Wide Web: http://www.necmits
Streszczenie treści zawartej na stronie nr. 18
Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and wil
Streszczenie treści zawartej na stronie nr. 19
TCO’95 MultiSync LCD1920NX (L19GC061) Black Model Congratulations! You have just purchased a TCO’95 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also, to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for
Streszczenie treści zawartej na stronie nr. 20
TCO’95 –continued reproductive damage in fisheating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO’95 demand requires that plastic components weighing more than 25 grams must not contain organically bound chlorine and bromine. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses,
