Streszczenie treści zawartej na stronie nr. 1
PlasmaSync Plasma Monitor
User’s Manual
NEC Technologies
Streszczenie treści zawartej na stronie nr. 2
Important Information Precautions Warnings and Safety Precaution Please read this manual carefully before using your NEC The NEC plasma monitor is designed and manufac- Plasma Monitor and keep the manual handy for future tured to provide long, trouble-free service. No main- reference. tenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. The plasma display panel consists of fine picture ele- CAU
Streszczenie treści zawartej na stronie nr. 3
Recommendations to avoid or minimize phosphor burn-in NOTE: When you connect a computer to this monitor, attach Like all phosphor-based display devices and all other gas the supplied ferrite cores. If you do not do this, this plasma displays, PlasmaSync monitors can be susceptible monitor will not comform to mandatory FCC standards. to phosphor burn under certain circumstances. Certain Attaching the ferrite cores. operating conditions, such as the continuous display of a Set the ferrite cores o
Streszczenie treści zawartej na stronie nr. 4
Précautions Mises en garde et précautions de Veuillez lire ce manuel avec attention avant d'utiliser votre sécurité PlasmaSync NEC moniteur et conserver ce manuel à portée Le moniteur PlasmaSync NEC a été conçu et fabriqué de la main pour une consultation ultérieure. pour une utilisation fiable et durable. Il ne nécessite aucun entretien en dehors du nettoyage. Utiliser un chiffon doux et sec pour nettoyer la surface de l'écran. Ne jamais utiliser de solvant comme l'alcool ou le ATTENTION diluan
Streszczenie treści zawartej na stronie nr. 5
Pour éviter le risque de combustion au phosphore, les REMARQUE: mesures suivantes sont recommandées : Lorsque vous branchez un micro-ordinateur sur ce moniteur, fixez les noyaux en ferrites fournis. Si vous Comme tous les appareils d'affichage à base de phosphore ne le faîtes, le moniteur ne sera pas en conformité avec et tous les autres affichages à gaz plasma, les moniteurs les exigences des standards FCC. Plasmasync peuvent être sujets à la combustion au Fixation des noyaux en ferrite. phosph
Streszczenie treści zawartej na stronie nr. 6
Limited Warranty Plasma Monitors NEC Technologies, Inc. (hereinafter NECTECH) warrants HOW YOU CAN GET WARRANTY SERVICE this product to be free from defects in material and work- 1. To obtain service on your product, consult the dealer manship under the following terms and, subject to the con- from whom you purchased the product. ditions set forth below, agrees to repair or replace (at 2. Whenever warranty service is required, the original NECTECH's sole option) any part of the enclosed unit da
Streszczenie treści zawartej na stronie nr. 7
Contents How to Attacch Options to the Plasma Monitor ............................................................................................. 8 Introduction Introduction to the PlasmaSync 42PD2/50PD1 ................................................................................ 9 The features you’ll enjoy include ..................................................................................................... 9 Contents of the Package ................................................
Streszczenie treści zawartej na stronie nr. 8
How to Attach Options to the Plasma Monitor You can attach your optional mounts or stand to the plasma Drawing A monitor in one of the following two ways: * In the upright position. (See Drawing A) * Lay the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. This device cannot be used or installed with- out a separate Tabletop Stand or other op- tional mounting acc
Streszczenie treści zawartej na stronie nr. 9
Introduction OSM and IPM are trademarks of NEC Technologies, Inc. * The personal computer and the operating system that are IBM PC/AT, PS/2, VGA, S-VGA, 8514/A and XGA are to be connected must be compatible with VESA DPMS. registered trademarks of International Business Machines Personal computers that are to be connected to the RGB3 Corporation. input must be compatible with DVI DMPM. Apple and Macintosh are registered trademarks of Apple * OSM (On Screen Manager) function Computer, Inc. The OS
Streszczenie treści zawartej na stronie nr. 10
Setup Procedure 1.Determine the installation location Warning * To ensure safe use, see “Before Use” and “Observe For proper installation and mounting it is strongly recom- the Following,” then install properly. mended to use a trained, authorized NEC dealer. Failure to follow correct mounting procedures could re- 2.Connect the equipment sult in damage to the unit or injury to the installer. Set the termination switch (75Ω/high impedance). Product warranty does not cover damage caused by im- Set
Streszczenie treści zawartej na stronie nr. 11
Opening the Terminal Board Attaching the Remote Control Cover Holder Slide the knob and at the same time lift the cover. Insert the top hook of the remote control holder into the installation hole of the main unit and then insert the bot- tom hook into its respective hole. To remove the remote control holder, first release the bot- tom hook, then release the top hook. 1 Knob 2 Housing the Remote Control in Removing the Terminal Board Cover the Remote Control Holder First insert the bottom part o
Streszczenie treści zawartej na stronie nr. 12
Part Names and Functions Front View 12 349 56 7 8 1 POWER/STANDBY 5 UP button The lamp color indicates the mode of power on/standby Functions as the (s ) button in the on-screen display or power management. (OSM) mode. 2 Remote control sensor 6 DOWN button Receives the signal from the remote control (when using Functions as the (t ) button in the on-screen display the wireless remote control). (OSM) mode. 3 VIDEO button 7 PROCEED button Switches to the signal connected with the VIDEO input Sets
Streszczenie treści zawartej na stronie nr. 13
Side View.... Terminal Board L/R 15
10 16 11 12 17 13 18 14 Insert the prongs completely. * for PLUGGABLE EQUIPMENT, tee socket-outlet shall be installed near the equipment and shall be easily accessible. 10 DIP SW 15 VIDEO Sets the various modes of this unit. IN [BNC] connector (BNC): Inputs the video (composite video signal). 11 RGB3 (DVI 29pin) IN [S] connector (DIN 4 pin): Inputs the S video (Y/ IN connector: Inputs a digital RGB signal. (TMDS) C separate signal). * When connections a
Streszczenie treści zawartej na stronie nr. 14
Remote Controller 16 17 1 POWER ON/OFF button: Switches the power on/off. (If the POWER/STANDBY let is not glowing, then these controls will not work.) POWER OFF POWER ON 2 Input selection buttons: 1 Select the input signal that will be displayed on the RGB 2 screen. RGB 1 RGB 3 VIDEO: Switches to the signal that is connected to the 2 VIDEO VIDEO IN connector. RGB1: Switches to the signal that is connected to the POSITION / CONTR OL RGB1 IN (mini D-sub 15-pin) connector. RGB2: Switches to the s
Streszczenie treści zawartej na stronie nr. 15
11 SHARPNESS: Battery Installation and Replacement Adjusts the fine screen quality of the video screen. The remote control is powered by two 1.5V AAA batteries. 12 VISUAL NORMAL button: 1. Press and open the cover. Returns the screen adjustments to the default factory visual settings. 13 RASTER NORMAL button: Returns the screen adjustments to the default factory raster settings. 14 ID SELECT: Selects the ID number of each monitor in a video wall so that each monitor can be adjusted with the remo
Streszczenie treści zawartej na stronie nr. 16
Operating Range * Use the remote controller within a distance of about 7 m / 23ft. from the front of the monitor's remote control sen- sor and at a horizontal angle of within 30°. * The remote control operation may not function if the monitor's remote control sensor is exposed to direct sun- light or strong artificial light, or if there is an obstacle between the sensor and the remote control unit. Approx.
7m/23ft 30˚
30˚
POWER OFF POWER ON RGB 2 RGB 1 RGB 3 VIDEO POSITION / CONTR OL EXIT PRO
Streszczenie treści zawartej na stronie nr. 17
Making the DIP Switch Settings Before connections are made, the DIP switch should be set to suit the application and the system structure. * DIP switches are moved up or down with something fine and pointed such as a miniature screwdriver or the tip of a ballpoint pen. Note: Be sure to switch off the main power before making settings. DIP Switch Functions and Settings 1 2 3 4 ON Factory Default Settings PIn No. Setting details Setting when shipped Switch position 1 On-off switching of on-screen
Streszczenie treści zawartej na stronie nr. 18
Power Management Function The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse have not been used for a fixed period. The power management function of the display becomes operational when the monitor is used with a personal computer based on the VESA DPMS and DVI DMPM system. When preparing to display a personal computer screen, check that the personal computer is properly connected to this unit
Streszczenie treści zawartej na stronie nr. 19
HIROYUK AIZASUSUSUSUSSWA HIROYUK AIZ Installation Wiring Diagram Plasma monitor Document camera VCR, Video copy
stand or Multimedia application Personal computer
with a digital
To VIDEO IN inputs RGB (TMDS) output
To R,G,B,H/CS, V inputs
(BNC) To RGB3 DVI 29pin
Scan Converter (not supplied) RGBcable (Supplied)
To mini D-SUB 15 Pin input RGBcable (Supplied)
To mini D-SUB 15 Pin input To EXTERNAL CONTROL
(mini D-SUB 15 Pin input) Pin adapter for Macintosh
(not supplied) EXTER
Streszczenie treści zawartej na stronie nr. 20
Connecting Your PC or Macintosh Connecting Your VCR DVD or Computer Laser Disc Player Connecting your PC or Macintosh computer to your Use a composite video cable with BNC connector and RCA video cables (not provided) to connect your VCR, plasma monitor will enable you to display your DVD or laser disc player to your PlasmaSync monitor. To computer's screen image. All of these following display make these connections, simply: standards are supported: 1. Turn off the power to your monitor and VCR
