Streszczenie treści zawartej na stronie nr. 1
User’s Manual
Streszczenie treści zawartej na stronie nr. 2
Declaration of the Manufacturer We hereby certify that the colour monitor SB SB Diamond Pro 750 / Diamond Plus 93 is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 686-1, Nishioi Oi-Machi Ashigarakami-gun Kanagawa 258-8533, Japan ENERGYSTAR Product As an ENERGYSTAR Partner, NEC-Mitsubishi Electronics Display of America, Inc. has determined
Streszczenie treści zawartej na stronie nr. 3
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. EFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICE- ABLE PARTS I
Streszczenie treści zawartej na stronie nr. 4
Contents SB SB Your new Diamond Pro 750 / Diamond Plus 93 monitor box* should contain the following: SB SB • Diamond Pro 750 / Diamond Plus 93 Monitor with tilt/swivel base • Power Cord • Captive Signal Cable • User’s Manual • CD ROM with Setup Software, complete User’s Manual and other helpful files. To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC. Captive Signal Cable User’s Manual Power Cord CD-ROM * Remember to save your original box and packing material to transpor
Streszczenie treści zawartej na stronie nr. 5
Quick Start SB SB To attach the Diamond Pro 750 / Diamond Plus 93 monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. SB SB For the Mac: Connect the Diamond Pro 750 / Diamond Plus 93 Mac
Streszczenie treści zawartej na stronie nr. 6
Quick Start – continued Power Outlet Power Cord Figure C.1 Power Button Figure D.1 6 User’s Manual
Streszczenie treści zawartej na stronie nr. 7
Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Mu ain Menu Sub-Men EXITEs xits the OSM menu. Exits to the OSM control mainmenu. CONTROL Moves the highlighted Moves the highlighted area area left/rightto select left/rightto selectone ofthe / one ofthe sub-menus. controls. CONTROLH+ as no function. Moves the bar inthe – or –/+ directionto decrease or increase the adjustment. SELECT/ WithoutOSD,switches Has no function. SBMODE SuperBrightMode ON
Streszczenie treści zawartej na stronie nr. 8
Controls – continued Color Control System Colour presets selects the desired colour setting. The bar is replaced by the colour setting choice. Each colour setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom except sRGB mode. Red, Green, Blue: Color Control System decreases or increases the monitor's red, green or blue colour guns depending upon which is selected. The change in colour will appear on screen an
Streszczenie treści zawartej na stronie nr. 9
Controls – continued Tools 2 Language: OSM controls menus are available in 6 languages. OSM Position: You can choose where you would like the OSM controls menu to appear on your screen. Selecting OSM Position allows you to manually adjust the OSM controls menu position from among Center, Top left, Top right, Bottom left and Bottom right. OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In the OSM Turn Off sub-menu, you can select how long the monitor waits after the last
Streszczenie treści zawartej na stronie nr. 10
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE SB SB DIAMOND PRO 750 / DIAMOND PLUS 93 COLOUR MONITOR: DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. Do not spill any liquids into the cabinet or use your monitor near water. Do not insert objects o
Streszczenie treści zawartej na stronie nr. 11
Recommended Use – continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. Position your monitor no closer than 40 cm and no further away than 60 cm from your eyes. The optimal distance is 50 cm. Rest your eyes periodically by fo
Streszczenie treści zawartej na stronie nr. 12
Specifications SB Monitor Diamond Pro 750 Notes Specifications Monitor P: icture Tube Dh iagonal4, 3 cm/17 inc 90°deflection,0.25 mm grille pitch medium shortpersistence phosphor, Vh iewable Image Size: 406 mm/16 inc aperture grille CRT,multi-layered,anti- static screencoating,dark-tintscreen and OptiClear screen. I: nputSignal Video ANALOG0.7 Vp-p/75 Ohms Sync: Separate sync.TTL Level Horizontalsync.Positive/Negative Verticalsync.Positive/Negative Composite sync.(Positive/Negative) (TTL Level)
Streszczenie treści zawartej na stronie nr. 13
Specifications – continued SB Monitor Diamond Plus 93 Notes Specifications Monitor P: icture Tube Dh iagonal5e 0 cm/19 inc 90°deflection,0.25/0.27 mm grill pitch, medium shortpersistence Vh iewable Image Size: 457 mm/18 inc phosphor,aperture grille CRT,multi- layered,anti-static screencoating, dark-tintscreenand OptiClear screen. I: nputSignal Video ANALOG0.7 Vp-p/75 Ohms Sync: Separate sync.TTL Level Horizontalsync.Positive/Negative Verticalsync.Positive/Negative Composite sync.(Positive/Negati
Streszczenie treści zawartej na stronie nr. 14
Features SuperBright Diamondtron CRT: This patented flat aperture grille CRT delivers an exceptional viewing experi- ence with unprecedented brightness and contrast and a virtually flat image that reduces distortion and glare so that what you see on-screen is what you get on your printed output. The state-of-the-art Mitsubishi PX-DBF electron gun and tight 0.25 mm grille pitch delivers precise focus for crisp, clear text and images. SuperBright Mode : With the simple touch of a button, the brigh
Streszczenie treści zawartej na stronie nr. 15
Troubleshooting No picture Display card should be completely seated in its slot. Power Button and computer power switch should be in the ON position. Signal cable should be completely connected to display card/computer. Check connector for bent or pushed-in pins. Image is scrolling or unstable Signal cable should be completely attached to the computer. Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin assignments
Streszczenie treści zawartej na stronie nr. 16
TCO’99 SB SB Diamond Pro 750 / Diamond Plus 93 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further develop- ment of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for en
Streszczenie treści zawartej na stronie nr. 17
TCO’99 – continued TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retar- dants with organically bound chlorine and bromine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. TCO’99 requirement permits the inclusion of lead since no replacement
