Instrukcja obsługi Fostex PM-1MKII

Streszczenie treści zawartej na stronie nr. 1

p-2
Safety Instructions
p-3
Introduction & Unpacking
p-4
Setup Instructions
p-5
Setup Instructions - continued
p-5
Back Panel Overview
p-6
Product Specifications
p-6
Cable and Wiring Information
p-6
Product Cleaning Instructions
p-7
Declaration of EC Directive
PM-1MK
- Reference Manual -
p-1
professional studio monitor

Streszczenie treści zawartej na stronie nr. 2

CAUTION: CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE RISK OF ELECTRIC SHOCK OF PLUG TO WIDE SLOT, FULLY INSERT. DO NOT OPEN ATTENTION: POUR EVITER LES CHOCS E LECTRIQUE S , CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET DO NOT REMOVE COVER (OR BACK). POUSSER JUSQU' AU FOND. NO USER - SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol, within

Streszczenie treści zawartej na stronie nr. 3

Introduction Thank you for purchasing the Fostex PM-1 MK Ⅱ Professional Studio Monitor. As with all Fostex products, the PM-1 MK Ⅱ has been designed to provide superlative performance, unquestioned reliability and exceptionally high value. The PM-1 MK Ⅱ was specifically engineered to fulfillall of your critical near-field monitoring needs and is emblematic of the years of experience Fostex has had in the professional audio marketplace. The PM-1 MK Ⅱ takes full advantage of internal bi-amplificat

Streszczenie treści zawartej na stronie nr. 4

Setup Instructions Monitoring Distance = 1 to 2 meters After carefully unpacking the PM-1 MK Ⅱ Professional Studio Monitor, it is now time to setup the monitors for the best acoustic performance in your studio. The PM-1 MK Ⅱ was designed to be used at a monitoring distance of 1 to 2 meters, typically referred to as the near-field. Monitoring Height = the acoustic center aimed at seated ear height It is recommended that the PM-1 MK Ⅱ be located in such a way that the acoustic center is located at

Streszczenie treści zawartej na stronie nr. 5

Setup Instructions continued Once the studio monitors have been placed in their final location, it is time to proceed to connecting your PM-1 MKⅡ studio monitors to the mixing console or digital workstation. Connection to the PM-1 MKⅡ can be made using XLR or TRS connectors. The gain control on the back of the monitor allows continuously variable adjustments to match most input types from -10dBV to +4dBu. The input is electronically balanced and is compatible with unbalanced sources, although th

Streszczenie treści zawartej na stronie nr. 6

Product Specifications Cabinet Dimensions Amplifier Power 215mm (W) × 380mm (H) × 283mm (D) includes heatsink High Frequency : 45 Watts 250mm (D) cabinet only - no heatsink Low Frequency : 75 Watts 8.5" (W) × 15" (H) × 11.25" (D) includes heatsink 9 7/8" (D) cabinet only - no heatsink Amplifier Distortion <0.007% THD @ 30 Watts / 8Ohm 20Hz-20kHz Net Weight 11 Kg Amplifier Signal to Noise Ratio 24.3 Pounds >93dB 20Hz - 30kHz Not Weighted Gross Weight Per pair (includes all packing material) Ampli

Streszczenie treści zawartej na stronie nr. 7

Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range. The Affect of Immunity on This Equipment The affect of the European Specification EN61000-6-1 (coexistence of ele