Streszczenie treści zawartej na stronie nr. 1
ENGLISH ENGLISH
Streszczenie treści zawartej na stronie nr. 2
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2001 by EIZO NANAO CORPORATION. All rights reserved. No pa
Streszczenie treści zawartej na stronie nr. 3
ENGLISH TABLE OF CONTENTS PRECAUTIONS .............................................................................. 4 1. INTRODUCTION ............................................................................ 9 1-1. Features ....................................................................................................... 9 1-2. Package Contents ........................................................................................ 9 1-3. Controls & Connectors .........................
Streszczenie treści zawartej na stronie nr. 4
PRECAUTIONS IMPORTANT! ´ This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ´ To ensure personal safety and proper maintenance. Please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] CAUTION:Risk of electric shock. Do not open. ATTENTION:Risqu
Streszczenie treści zawartej na stronie nr. 5
ENGLISH WARNING Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. ´ Place the unit on a strong, stable surface. A unit placed on an inadequate surface may fall, result
Streszczenie treści zawartej na stronie nr. 6
WARNING ´ Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or other damage. * Do not overload your power circuit, as this may result in fire or electric shock. * For proper connections of the power cord, be certain to plug the power cord to the provided unit connector and directly to a wall outlet. Not doing so may result in fire or electric shock. ´ Handle
Streszczenie treści zawartej na stronie nr. 7
ENGLISH W CA ARNING UTION ´ Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury or equipment damage. * When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. OK Dropping the unit may result in injury or equipment damage. ´ Do not block the ventilation slots on the cabinet. * Do not place books or any o
Streszczenie treści zawartej na stronie nr. 8
Suggestions for Maximizing Comfort ´ To lessen the chance of possible injury and to increase your comfort and productivity while you operate the unit, we suggest the followings: * Avoid less favorable body positioning. Sit back on the chair with your back straight. * Adjust the height of the chair so that the both soles touch the floor. * Adjust the height of your chair, unit, or keyboard so that you can keep your wrists straight while typing. * Set the unit slightly below eye level. ´ Adjust b
Streszczenie treści zawartej na stronie nr. 9
ENGLISH 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features p.36) 1280 x 1024 resolution incorporated 16 inch Color LCD Monitor p.35) p.36) DVI digital input (TMDS ) compliant Horizontal scanning frequency of 31.5 ~ 80kHz Horizontal (Digital): 31.5 ~ 64 kHz Vertical scanning frequency of 50 ~ 85 Hz (1280 x 1024 ~ 75Hz) Vertical (Digital): 60 Hz (VGA Text: 70 Hz) Auto Adjustment compliant and original “Picture Adjustment Program” software included Co
Streszczenie treści zawartej na stronie nr. 10
1-3. Controls & Connectors Front (1) ScreenManager™ (2) AUTO Adjustment button (3) Control Buttons (4) Enter Button (1) (5) Power Switch *1 (6) Power Indicator Indicated color Monitor’s status Green Power -on Yellow Power save mode Flashing Y ellow Power save mode (2 times for each) for digital Slowly flashing Yellow Power is off (2)(3)(4)(5)(6) Rear (7) Power Connector *2 (8) Security Lock Slot (9) DVI-I Input Connector *3 (10) 4 Holes for Mounting an Arm-Stand *3 (11) Stand (Detatchable) (10)
Streszczenie treści zawartej na stronie nr. 11
ENGLISH 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution and frequency) in accordance with the charts below. Analog Input Resolution Frequency Remarks 6z 40 x 480~A 85 H VGA, VES 6z 40 x 4806h 6.67 H Apple Macintos 7z 20 x 4007t 0 H VGA Tex 8z 00 x 600~A 85 H VES 8z 32 x 6247h 5 H Apple Macintos 1z 024 x 768~A 85 H VES 1z 152 x 8647A 5 H VES 1z 152 x 8707h 5 H Apple Macintos 1z 280 x 9607h 5 H Apple Macintos 1z 28
Streszczenie treści zawartej na stronie nr. 12
2-2. Connecting the signal cable Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the DVI-I connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. [Analog Input] Video Output Connector D-Sub mini 15 pin ·Standard graphics board ·Macintosh G3 (Blue & White) / G4 FD-C16 (enclosed) Video Output Connector D-Sub 15 pin Macintosh
Streszczenie treści zawartej na stronie nr. 13
ENGLISH 2. Plug the power cord into the power connector on the rear of the monitor and plug the other end of the power cord into a power outlet. WARNING WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. 3. Turn on the monitor’s
Streszczenie treści zawartej na stronie nr. 14
3. ScreenManager 3-1. How to use the ScreenManager As shown on the display, the ScreenManager is used to adjust the LCD monitor. ScreenManager consists of main menus and sub menus. Adjustments are made using the Enter and Control buttons (up, down, right and left) located on the front panel. Enter Button Control Buttons Auto Adjustment Button 1. Entering the ScreenManager Push the Enter Button once to display the main menu of the ScreenManager. [ Main Menu ] 2. Making Adjustments and Settings (
Streszczenie treści zawartej na stronie nr. 15
ENGLISH 3-2. ScreenManager Adjustments and Settings. The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only. Main menu Sub menu Reference Screen Clock* Phase* Position* Resolution* Smoothing Contrast/Brightness Color- Range Adjustment* Management Standard Mode Temperature Custom Mode Temperature 4. ADJUSTMENT(p.18) Saturation Hue Gain Save PowerManager DVI DMPM** VESA DPMS* Others
Streszczenie treści zawartej na stronie nr. 16
3-3. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function Auto adjustment button adjustments and settings in the ScreenManager. Unlocked function Adjustment of contrast and brightness by the control buttons. To lock Press on the Auto adjustment button while switching on the monitor’s power switch on the front panel. To unlock Switch off the monitor’s power by the power switch on the front panel, then hold down the Auto a
Streszczenie treści zawartej na stronie nr. 17
ENGLISH Off Timer The off timer function causes the monitor to automatically enter a power off mode after a predetermined amount of time has lapsed. This function was created to reduce p.35) afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use. [Procedure] (1) Select “Off Timer” in the ScreenManager “Others” menu. (2) Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to 23 hours). [Off t
Streszczenie treści zawartej na stronie nr. 18
4. ADJUSTMENT 4-1. Screen Adjustment Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. When using the analog input, it is also recommended to use the ScreenManager function when first installing the display or whenever changing the system. For conven
Streszczenie treści zawartej na stronie nr. 19
ENGLISH 3. Adjust by using “Screen” menu in the ScreenManager. (1) Vertical bars appear on the screen. p.35) Use the “Clock” adjustment Select the “Clock” and eliminate the vertical bars by using the right and left of the control buttons. Do not continuously press the control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment as follows. Wh
Streszczenie treści zawartej na stronie nr. 20
(3) The screen position is incorrect. Use the “Position” adjustment. The correct displayed position of LCD monitor is decided because the number and the position of the pixels are fixed. The “Position” adjustment moves the image to the correct position. Select “Position” and adjust the position so all the dotted line appear around screen, by using the up, down, right and left buttons. (4) Screen image is smaller or larger than the actual screen images. Use the “Resolution” adjustment.
