Streszczenie treści zawartej na stronie nr. 1
SAFETY SYMBOLS .................................................... 2
Important
PRECAUTIONS ..................................................... 3
Please read this User’s Manual carefully to
1. Introduction .............................................................. 7
familiarize yourself with safe and effective
1-1. Features .............................................................. 7
usage.
1-2. Buttons and Indicators ........................................ 8
1-3. Utility Disk ....
Streszczenie treści zawartej na stronie nr. 2
SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or propertyor product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2007-2009 EIZO NANAO CORPORATION All rights reserved.
Streszczenie treści zawartej na stronie nr. 3
PRECAUTIONS PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. This product is designed for use in Japan only and cannot be used in any other countries. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure
Streszczenie treści zawartej na stronie nr. 4
PRECAUTIONS WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in the
Streszczenie treści zawartej na stronie nr. 5
PRECAUTIONS WARNING When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a dam
Streszczenie treści zawartej na stronie nr. 6
PRECAUTIONS Notice for this monitor In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on the LCD panel, this is not malfunction. Percentage of effective pixels : 99.9994% or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicke
Streszczenie treści zawartej na stronie nr. 7
1. Introduction 1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • 29.8 inch class wide screen format LCD • Wide color gamut of 97% of Adobe RGB • WQXGA (2560 × 1600) display compliant • HDCP signal (SIGNAL2) compliant • Dual-display compliant by introducing dual-input system (DVI-D × 2 connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: 26 - 100 kHz • Vertical scan frequency: 29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 - 71 Hz) • Resolu
Streszczenie treści zawartej na stronie nr. 8
1. Introduction 1-. Buttons and Indicators Adjustment menu ® (ScreenManager *) Buttons 1. Input Signal Selection button 2. Mode button 3. Enter button 4. Control buttons (Left, Down, Up, Right) 5. Power button 6. Power indicator Indicator status Operation status Blue The screen is displayed Flashing blue (2 times for each) When the timer is set for ColorNavigator, notifies that a recalibration is required (for CAL mode or EMU mode) Orange Power saving Off Power off ® *ScreenManager is
Streszczenie treści zawartej na stronie nr. 9
1. Introduction 1-. Utility Disk An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. Disk contents and software overview The disk includes software programs for adjustment and User’s Manual. Refer to "Readme.txt" or the "read me" file on the disk for software startup procedures or file access procedures. Item Overview For Windows For Macintosh A “Readme.txt” or “read me” file √ √ C
Streszczenie treści zawartej na stronie nr. 10
2. Installation . Installation -1. Environmental Settings Depending upon your operating environment, it may be necessary to set the frequency that corresponds to your graphics board. If you install it for the first time or change environment, set the monitor. NOTE • Factory default settings are for single display mode and Dual Link. • We recommend using ColorNavigator with single display mode in landscape orientation. • Refer to the manual of the graphics board. • These environment described
Streszczenie treści zawartej na stronie nr. 11
2. Installation Hold down the button and press the button. 3 The menu will appear in the middle of the screen.Press the 4 buttons to select "DualDisplay" and then press . Inputting 10 bit Color Signal Some graphics boards support 10 bit color signal input. How to set 1 Connect the [SIGNAL1] signal input connector and the computer using the [DD200DL-BK] signal cable. After connecting the cable connectors, tighten the screws of the connectors to sec
Streszczenie treści zawartej na stronie nr. 12
2. Installation -. Making Use of USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment • PC equipped with USB ports or another USB hub connected to the USB compliant PC • Windows 2000/XP/Vista // Mac OS 9.2.2 and Mac OS X 10.2 or later • USB Cable (MD-C93, enclosed) NOTE • The USB hub
Streszczenie treści zawartej na stronie nr. 13
3. Screen Adjustment and Settings . Screen Adjustment and Settings -1. Basic Operation and Functions ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. ® Adjustment menu (ScreenManager ) Enter button Power button FineContrast Menu Control buttons Mode button (Left, Down, Up, Right) NOTE • The Adjustment menu and the FineContrast menu cannot be displayed at the same time. 1 Enteringthe ScreenManager Press once to display
Streszczenie treści zawartej na stronie nr. 14
3. Screen Adjustment and Settings Functions The following table shows all the ScreenManager's adjustment and setting menus. Main menu Sub menu Reference Screen Smoothing 3-7. Displaying Lower Resolutions 1 Color(Custom) Brightness 3-2. Color Adjustment * Temperature Gamma Saturation Hue Gain 6 Colors Reset PowerManager DVI DMPM 3-3. Power-save Setup OFF Others Screen Size 3-7. Displaying Lower Resolutions Border Intensity Input Signal Set the input signal selection of automatic or manual. Off T
Streszczenie treści zawartej na stronie nr. 15
3. Screen Adjustment and Settings -. Color Adjustment Simple Adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. To select FineContrast mode Directly pressing allows you to select the best suited mode for screen display from 4 FineContrast modes; Custom, sRGB, EMU, and CAL. Press to exit the menu. ->Custom -> sRGB -> EMU -> CAL Tips • The Adjustment menu and the FineContrast menu cannot be displayed at the same time. FineCo
Streszczenie treści zawartej na stronie nr. 16
3. Screen Adjustment and Settings Advanced Adjustments[Adjustment menu] Color settings of each FineContrast mode can be adjusted and saved by using the menu of the Adjustment menu. Adjustment Items The adjustable items and displayed icons on the menu depend on the selected FineContrast mode. " √ ": Settable/Adjustable " - ": Fixed at the factory FineContrast Mode Icons Functions Custom sRGB EMU CAL Brightness √ √ ー ー * Temperature √ ー ー ー * Gamma √ ー ー ー * Saturation √ ー ー
Streszczenie treści zawartej na stronie nr. 17
3. Screen Adjustment and Settings Adjustment Contents Menu Function Descriptions Adjustable range Brightness To set the brightness of the screen 0~100% Tips • The values shown in the “%” are available only as reference. Temperature To set the color temperature 4000K~10000K in 500 K increments (including 9300 K) Tips • The values shown in the Kelvin are available only as a reference tool. • While color temperature is adjusted, is adjusted automatically according to the color temperature.
Streszczenie treści zawartej na stronie nr. 18
3. Screen Adjustment and Settings -. Power-save Setup The menu in the ScreenManager enables to set the power-save setup. NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. • Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the upstream and the downstream ports). Theref
Streszczenie treści zawartej na stronie nr. 19
3. Screen Adjustment and Settings -. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use. [Procedure] 1. Select in the ScreenManager menu. 2. Select "Enable" and touch the Right and Left directing switches to adjust the o
Streszczenie treści zawartej na stronie nr. 20
3. Screen Adjustment and Settings -. Power Indicator Setting Light off the power indicator. This function is available for the multiple panels settings. [Procedure] 1. Select in the ScreenManager menu. 2. Select "Disable". -. Displaying Lower Resolutions The lower resolutions are enlarged to full screen automatically. Using the function in the menu enables to change the screen size. NOTE • When "Single Link/10bit" is selected on the
