Streszczenie treści zawartej na stronie nr. 1
Operation/Reference Guide
MVP-8400i
® ®
Modero ViewPoint Wireless Touch Panel with Intercom
MVP-BP Power Pack
NXA-CFSP Compact Flash Card
Last Revised: 7/22/2008
Touch Panels & Accessories
Streszczenie treści zawartej na stronie nr. 2
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. • Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a pe
Streszczenie treści zawartej na stronie nr. 3
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are de
Streszczenie treści zawartej na stronie nr. 4
Streszczenie treści zawartej na stronie nr. 5
Table of Contents Table of Contents MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom .................1 Overview .................................................................................................................. 1 Specifications............................................................................................................ 2 MVP-BP Power Pack ...........................................................................................5 Overview ............
Streszczenie treści zawartej na stronie nr. 6
Table of Contents Using the Site Survey tool............................................................................................. 22 Step 2: Configure the Card’s Wireless Security Settings ........................................ 24 Configuring the Modero’s wireless card for unsecured access to a WAP200G ............. 25 Configuring the Modero’s wireless card for secured access to a WAP200G................. 27 Automatically set SSID .......................................................
Streszczenie treści zawartej na stronie nr. 7
Table of Contents Wireless Security Page .................................................................................................. 71 Open (Clear Text) Settings............................................................................................ 72 Static WEP Settings....................................................................................................... 73 WPA-PSK Settings.............................................................................................
Streszczenie treści zawartej na stronie nr. 8
Table of Contents Text Effects Names............................................................................................... 132 Button Query Commands ..................................................................................... 133 Panel Runtime Operations .................................................................................... 142 Input Commands................................................................................................... 147 Embedded codes......
Streszczenie treści zawartej na stronie nr. 9
Table of Contents USB Driver................................................................................................................... 181 Panel Not in Listed As a Connected Device ................................................................ 181 Connection Status ....................................................................................................... 182 Panel Doesn’t Respond To Touches ............................................................................ 182 B
Streszczenie treści zawartej na stronie nr. 10
Table of Contents vi MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Streszczenie treści zawartej na stronie nr. 11
MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom Overview The MVP-8400i Modero Viewpoint Wireless Touch Panel (FIG. 1) is a 8.4", 802.11-based wireless handheld G4 touch panels, pre-installed with an 802.11 Wi-Fi Interface Card to communicate with a NetLinx Master via a standard 802.11g Wireless Access Point. The MVP-8400i features full-duplex intercom functionality. FIG. 1 MVP-8400i Touch Panel MVP panels feature
Streszczenie treści zawartej na stronie nr. 12
MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom Optional AMX accessory solutions for the MVPs include MVP-TDS Table Top Docking Station (see the MVP-TDS Table Top Docking Station Operation/Reference Guide for details). MVP-WDS Wall/Flush Mount Docking Station-Black/Silver (see the MVP-WDS Wall Docking Station Operation/Reference Guide for details). MVP-KS Kickstand (see the MVP-KS Kickstand Operation/Reference Guide for details). Specifications The MVP-8400i panel utilizes an
Streszczenie treści zawartej na stronie nr. 13
MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom MVP-8400i Specifications (FG5965-04) (Cont.) Power Modes: • ON: Panel is fully functional. • STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs still function. Panel resumes the ON mode in ~ 1 second. • OFF: On-board programs not running, touch screen still powered, LED not functional. Panel resumes the ON mode in ~ 30 seconds. Battery Duration: • Eight hours of normal use (25% On state, 25% Standby, and 50% Off). (
Streszczenie treści zawartej na stronie nr. 14
MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom MVP-8400i Specifications (FG5965-04) (Cont.) Internal Components (Cont.): Button Assignments: Button assignments can only be adjusted in TPD4 and not on the panels. • Button channel range: 1 - 4000 button push and feedback (per address port) • Button variable text range: 1 - 4000 (per address port) • Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State) • Level range: 1 - 600 (default level value 0-255, can be
Streszczenie treści zawartej na stronie nr. 15
MVP-BP Power Pack MVP-BP Power Pack Overview The MVP-BP Power Pack (FG5965-20) is a rechargeable Lithium-Ion battery used to provide power to the MVP touch panels. Two MVP-BPs are included with each MVP-8400i touch panel. FIG. 3 MVP-BP Power Pack MVP-BPs can be charged with either a Table Top Docking Station (MVP-TDS), Wall/Flush Mount Docking Station (MVP-WDS), or MVP panel itself. Extra MVP-BP Power Packs can be purchased separately. MVP-BP Specifications MVP-BP Specifications Dim
Streszczenie treści zawartej na stronie nr. 16
MVP-BP Power Pack Battery Compartment Cover Alignment Guide hole openings Battery connector Traction Grooves Battery pins Battery Battery slot 2 Removal Battery slot 1 Straps FIG. 4 Installing MVP-BP batteries into the MVP battery slots If you are only using one battery, use Battery Slot #1. 4. To replace the battery compartment cover, use the alignment guide holes to align the cover with the edges of the battery compartment, and slide it back into place until it snaps shut. 6 MVP-8400i Modero
Streszczenie treści zawartej na stronie nr. 17
NXA-CFSP Compact Flash NXA-CFSP Compact Flash Overview Every MVP panel is shipped with a 128 MB Compact Flash card. Compact Flash Card - Security All security user names and passwords (for the docking station) are stored in the Compact Flash card. After installing the Compact Flash card upgrade, all security user names and passwords need to be re- entered to enable security. For this reason, it is recommended that you upgrade the card prior to setting up the security information for the dockin
Streszczenie treści zawartej na stronie nr. 18
NXA-CFSP Compact Flash Battery Compartment cover Housing screws B Rear outer housing Bottom rim of outer housing Trim fits inside A the grooves around the edges of the panel Circuit board housing attachment locations (4) Panel FIG. 5 Removing the MVP enclosure (housing) 3. Grasp the bottom rim of the rear housing just above the MVP interface connector, and carefully pull the bottom rim away from the IR Emitter and up, to expose the internal components. 4. Remove the trim from the top rim of th
Streszczenie treści zawartej na stronie nr. 19
NXA-CFSP Compact Flash Internal circuit board Card removal grooves (top view - detail) IR Emitters Compact Flash card A B Wireless Interface card FIG. 6 Location and orientation of the Compact Flash cards (both MVP panels) 2. Place the circuit board on a flat level surface so that the IR Emitters are pointing away from you (FIG. 6). 3. Insert the tip of a grounded flat-head screwdriver into one of the card removal grooves (located on either side of the existing Compact Flash card), and gently
Streszczenie treści zawartej na stronie nr. 20
NXA-CFSP Compact Flash 10 MVP-8400i Modero Viewpoint Wireless Touch Panels
