Streszczenie treści zawartej na stronie nr. 1
SyncMaster 2280HD
SyncMaster 2280HD
Install drivers
Streszczenie treści zawartej na stronie nr. 2
SyncMaster 2280HD Model Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The images here are for refe
Streszczenie treści zawartej na stronie nr. 3
This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon
Streszczenie treści zawartej na stronie nr. 4
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor.
Streszczenie treści zawartej na stronie nr. 5
Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away
Streszczenie treści zawartej na stronie nr. 6
Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power co
Streszczenie treści zawartej na stronie nr. 7
If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - unplug it immediately and contact an authorized dealer or the Service Center. This may cause electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where the monitor c
Streszczenie treści zawartej na stronie nr. 8
Never insert anything metallic into the monitor openings. This may cause electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed s
Streszczenie treści zawartej na stronie nr. 9
Place the product out of children's reach, as they could damage by hanging onto it. A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep the product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to clim
Streszczenie treści zawartej na stronie nr. 10
height so that the top of the monitor is slightly below eye level. Adjust the monitor angle so that there is no reflected light on the screen.Try to maintain your arms perpendicular to your armpits. Keep your arms level with the back of your hands. Keep the angle of the elbow perpendicular. Keep the angle of the knees at more than 90 degree. Do not let your feet fall up from the floor. Adjust the arm position so that it is below the heart.
Streszczenie treści zawartej na stronie nr. 11
SyncMaster 2280HD Model Features Features of Digital Broadcasting - All multimedia broadcasting processes including program creation, transmission, and receiving are processed digitally, which allows users to enjoy a very high screen quality without any signal loss as well as benefit from various additional services. Viewing Digital Broadcasting - To watch digital broadcasting, you need a monitor which can receive digital broadcasts and fulfill the required condi
Streszczenie treści zawartej na stronie nr. 12
Without Stand With Stand Manual Warranty Card Quick Setup Guide User's Guide, Monitor Driver (Not available in all locations) Cable D-Sub Cable Power Cord CBF-stereo Cable BN39-00244B 3903-000085 BN39-00061B Other Remote Control Batteries (AAA X 2) Cleaning Cloth BN59-00580A 4301-000121 Sold separately
Streszczenie treści zawartej na stronie nr. 13
RCA Cable (Video-Yellow, Audio cable Component(PR, PB, Y) Cable Audio-Red and White) TV Antenna Cable S-VIDEO Cable Earphones/Headphones (Coaxial Cable) Digital audio optic output HDMI Cable DVI Cable cable This is an accessory that can be added depending on the model. Front 1. TV/DTV 2. PIP 3. 4. – + 5. MENU 6. 7. Remote Control Sensor 8. [ ] Power button 9. Power indicator 10. Speaker 1. TV/DTV This button is used to switch between normal and DTV br
Streszczenie treści zawartej na stronie nr. 14
3. Moves from one menu item to another vertically or adjusts selected menu values. In TV/DTV mode, selects TV/DTV channels. 4. – + Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume. 5. MENU Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 6. Press the ' ' button to change the input signal source. Changing the source is allowed only in external devi
Streszczenie treści zawartej na stronie nr. 15
(The configuration at the back of the monitor may vary from product to product.) 1. POWER Power terminal Connect the power cord for your monitor to the POWER on the back of the monitor. This product may be used with 100 ~ 240VAC(+/- 10%). 2. HDMI IN/PC 1. HDMI IN : Connects to the HDMI jack of a device with an HDMI output. No sound connection is needed for an HDMI to HDMI connection. Use the HDMI IN terminal for a DVI connection to an external device. You can
Streszczenie treści zawartej na stronie nr. 16
output terminal of the external device using a VIDEO cable. 3. S-VIDEO : Connect the terminal of your monitor to the S- [S-VIDEO] VIDEO output terminal of the external device using a S-VIDEO cable. 4. ANT IN 1. Connects to an air antenna. 2. Connects to a cable system. For more information on how to connect antennas, see "Connecting TV" in the Installation section. 5. DVI/PC IN 1. DVI-D : Connect the DVI cable to the [DVI-D] port on the back of your monitor. (Wi
Streszczenie treści zawartej na stronie nr. 17
8. Connect your headphones to the Headphone connection terminal[ ]. 9. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. See Connecting the monitor for further information regarding cable connections. Contact a Service Center to purchase any products sold separately. Remote Contro
Streszczenie treści zawartej na stronie nr. 18
2. Number button 3. - button 4. TV/DTV 5. CH LIST 6+ VOL - 7. MUTE 8. MENU 9. Up-Down Left-Right buttons 10. ENTER 11. SOURCE 12. PRE-CH 13. ANTENNA 14. ADD/DEL 15. CH 16. EXIT 17. PIP 18. INFO 19. SLEEP 20. P.MODE, M/B 21. S.MODE 22. AUTO 23. P.SIZE 24. SOURCE 25. POSITION 26. SIZE 27. MTS 1. POWER Turns the monitor On/Off. 2. Number button Selects TV/DTV channels in the TV/DTV mode. Used to change channels when PIP is selected and the PIP SOURCE is set to TV/DTV. 3. -
Streszczenie treści zawartej na stronie nr. 19
6. + VOL - Adjusts the audio volume. 7. MUTE Press to mute the sound temporarily. Displayed on the bottom left of the screen. Press the MUTE button again to cancel the Mute function. Alternatively press the - VOL + buttons to cancel the Mute function. 8. MENU Opens the on-screen menu and exits from the menu or closes the adjustment menu. 9. Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 10. ENTER Ac
Streszczenie treści zawartej na stronie nr. 20
PC / DVI ( M/B=MagicBright™) MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then press the button again to circle through available preconfigured modes. ( Entertain → Internet → Text → Custom ) 21. S.MODE When you press this button, current mode is displayed on the lower center of the screen. The monitor has a built-in high fidelity stereo amplifier. Then press the button again to circle through
