Streszczenie treści zawartej na stronie nr. 1
X203W
Safety Instructions
Observe the folowing safety guidelines when connection and using your monitor:
• Be sure that your monitor is electrically rated to operate with the AC power available in your location.
• Locate your monitor near an easily accessible electrical outlet.
• Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched
with a sharp or abrasive implement.
• Put your monitor in a location with low humidity and a min
Streszczenie treści zawartej na stronie nr. 2
X203W Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. Howeve
Streszczenie treści zawartej na stronie nr. 3
X203W LAMP Disposal LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG. 依据中国《电子信息产品污染控制管理办法》，简称《管理办法》或《China RoHS》之规定，列出 宏碁电子信息产品中可能含有的有毒或有害物质的名称及含量于以下表格中。 显示器（液晶及 CRT） 零部件名称 有毒有害物质或元素 多溴联苯 多溴二苯醚 +6 铅（Pb） 汞（Hg） 镉（Cd） 六价铬（Cr ） （PBB） （PBDE） 金属结构件 X O O O O O 塑料结构件 O O O O
Streszczenie treści zawartej na stronie nr. 4
X203W SPECIFICATION Driving system TFT Color LCD Size 20.0" W Pixel pitch 0.258mm( H )x 0.258mm( V ) 2 LCD Panel Brightness 300cd/m (Typical) Contrast 2500:1 (ACM) 0 0 Viewable angle 160 (H) 160 (V) Response time 5 ms (Typical) Video R,G,B Analog Interface H-Frequency 31KHz - 83KHz V-Frequency 56-75Hz Display Colors 16.7M Colors Dot Clock 165MHz Max. Resolution 1680 x 1050 @60Hz Plug & Play VESA DDCCI/DDC2B ON Mode< 45 W ENERGY STAR OFF Mode< 1 W Power Consumption ( Maximum ) 48 Watts D-Sub I
Streszczenie treści zawartej na stronie nr. 5
X203W SPECIFICATION 0 0 Operating Temp: 5 to 35 C Environmental 0 0 Storage Temp.: -20 to 60 C Considerations Operating Humidity: 10% to 85% Dimensions 481.5(W) x 375(H) x 177.4(D)mm Weight (N. W.) 4.75 kg Unit (net) Power Button Switch MENU/ENTER Automatic adjustment/ Exit Empowering Key/ Exit Contrast Brightness ACM On/Off Focus Clock H.Position External V.Position Controls: (Warm) Color (Cool) Color Functions RGB Color temperature Language OSD position . timeout Auto configuration (only
Streszczenie treści zawartej na stronie nr. 6
TABLE OF CONTENTS Special notes on LCD monitors ..................................................1 Information for your safety and comfort..................................2 Unpacking ...................................................................................5 Attaching/Removing the base ....................................................6 Screen position adjustment ........................................................6 Connecting the power cord .....................................
Streszczenie treści zawartej na stronie nr. 7
X203W SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less s
Streszczenie treści zawartej na stronie nr. 8
X203W Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for plug as disconnecting device Observe the follwing guidelines when connecting and disconnecting power to the power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the pro
Streszczenie treści zawartej na stronie nr. 9
X203W Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: • the power cord or plug is damaged, cut or frayed • liquid was spilled into the product • the product was exposed to rain or water • the product has been dropped or the case has been da
Streszczenie treści zawartej na stronie nr. 10
X203W • take short rests to relax your neck and shoulders • avoid tensing your muscles or shrugging your shoulders • install the external display, keyboard and mouse properly and within comfort able reach • if you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and
Streszczenie treści zawartej na stronie nr. 11
X203W UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. • LCD Monitor • D-Sub Cable • DVI Cable • AC Power Cord (Only Dual-Input Model) • User Manual • Quick Start Guide EN-5
Streszczenie treści zawartej na stronie nr. 12
X203W Attaching / Removing the Base Install: Remove: Align the release button on the Depress the release button as bottom of the monitor with the indicated first before removing the corresponding base and follow the arrow direction slots on the bottom of the base. to remove it. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can b
Streszczenie treści zawartej na stronie nr. 13
X203W CONNECTING THE POWER CORD • Check first to make sure that the power cord you use is the correct type required for your area. • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. • For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. • For unit using at 220/240 V AC
Streszczenie treści zawartej na stronie nr. 14
X203W Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. LED State Light ON Blue Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds. DDC To make your installation easier, the monitor is able to Plug and Play with your system
Streszczenie treści zawartej na stronie nr. 15
X203W CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Logic Ground 3. Blue 11. Monitor Ground 4. Monitor Ground 12. DDC-Serial Data 5. DDC-return 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground EN-9
Streszczenie treści zawartej na stronie nr. 16
X203W 24-Pin Color Display Signal Cable PIN Meaning PIN Meaning 1. TMDS Data2- 13. NC 2. TMDS Data2+ 14. +5V Power TMDS Data 2/4 GND(return for 3. 15. Shield +5V hsync.vsync) 4. NC 16. Hot Plug Detect 5. NC 17. TMDS Data0- 6. DDC Clock 18. TMDS Data0+ TMDS Data 0/5 7. DDC Data 19. Shield 8. NC 20. NC 9. TMDS Data1- 21. NC 10. TMDS Data1+ 22. TMDS Clock Shield TMDS Data 1/3 11. 23. TMDS Clock+ Shield 12. NC 24. DDC TMDS Clock- EN-10
Streszczenie treści zawartej na stronie nr. 17
X203W Standard Timing Table To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen“ pattern or using the pattern in the floppy disk provided. When none of the mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 9 user modes. The only conditi
Streszczenie treści zawartej na stronie nr. 18
X203W INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2 Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port. 2. Connect power cord Connect the
Streszczenie treści zawartej na stronie nr. 19
X203W USER CONTROLS 34565 12 Front Panel Controls 1.Power Switch: To turn ON or OFF the power. 2.Power LED: Lights up to indicate the power is turned ON. 3.Empowering / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu). 2) When OSD menu is in off status, press this button to select scenario mode. 4.Auto Adjust button / Exit: 1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2)When OSD menu is in off status, press this
Streszczenie treści zawartej na stronie nr. 20
X203W HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4. • P/X Series OSD behave When user press “MENU” button on front bezel A B A. Acer eColor Management If selected to “Acer e
