Streszczenie treści zawartej na stronie nr. 1
3-865-633-22 (1)
Trinitron Color
Computer Display
US
Operating Instructions
FR
Mode d’emploi
CPD-110GS
CPD-210GS
© 1998 by Sony Corporation
Streszczenie treści zawartej na stronie nr. 2
Owner’s Record Hinweise • Aus ergonomischen Gründen wird empfohlen, die Grundfarbe The model and serial numbers are located at the rear of the unit. Blau nicht auf dunklem Untergrund zu verwenden (schlechte Record these numbers in the spaces provided below. Refer to them Erkennbarkeit, Augenbelastung bei zu geringem whenever you call upon your dealer regarding this product. Zeichenkontrast). Model No. Serial No. • Aus ergonomischen Gründen (
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 1: Connect your monitor to your computer . . . . . . . . . . . . . . . 6 Step 2: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Step 3: Turn on the monitor an
Streszczenie treści zawartej na stronie nr. 4
Use of the tilt-swivel Precautions This monitor can be adjusted within the angles shown below. To turn the monitor vertically or horizontally, hold it at the bottom Warning on power connections with both hands. • Use the supplied power cord. If you use a different power cord, be sure that it is compatible with your local power supply. For the customers in the U.S.A. 90° If you do not use the appropriate cord, this monitor will not conform to mandatory FCC standards. 15° 90° Example of plug t
Streszczenie treści zawartej na stronie nr. 5
Identifying parts and controls See the pages in parentheses for further details. Front Rear MENU ENTER 1 MENU button (page 9) 5 AC IN connector (page 6) This button displays the MENU OSD. This connector provides AC power to the monitor. 2 ENTER button (page 9) 6 Video input connector (HD15) (page 6) This button selects the menu and adjustment items. This connector inputs RGB video signals (0.700 Vp-p, US positive) and sync signals. 36 (contrast) +/- +/- buttons (page 9) +/- +/- These buttons d
Streszczenie treści zawartej na stronie nr. 6
Step 2:Connect the power cord Setup With the monitor and computer switched off, first connect the Before using your monitor, check that the following accessories power cord to the monitor, then connect it to a power outlet. are included in your carton: • Power cord (1) • Windows Monitor Information Disk (1) • Warranty card (1) • Notes on cleaning the screen’s surface (1) • This instruction manual (1) Step 1:Connect your monitor to power cord (supplied) to AC IN your computer Turn off the mo
Streszczenie treści zawartej na stronie nr. 7
If no picture appears on your screen Selecting the on-screen menu • Check that the monitor is correctly connected to the computer. • If NO INPUT SIGNAL appears on the screen, confirm that language (LANGUAGE/ your computer’s graphic board is completely seated in the INFORMATION) correct bus slot. • If you are replacing an old monitor with this model and OUT English, French, German, Spanish, and Italian versions of the on- OF SCAN RANGE appears on the screen, reconnect the old screen menus ar
Streszczenie treści zawartej na stronie nr. 8
7 ZOOM (page 11) ZOOM Select the ZOOM menu to enlarge Customizing Your Monitor ZOOM or reduce the picture. 26 You can make numerous adjustments to your monitor using the SELECT EX I T on-screen menu. 8 COLOR (page 11) COLOR USER 5000KKK 6500 9300 Select the COLOR menu to adjust Navigating the menu R50 the picture’s color temperature. G50 B50 You can use this to match the Press the MENU button to display the main MENU on your SELECT EX I T monitor’s colors to a printed screen. See page 9 fo
Streszczenie treści zawartej na stronie nr. 9
x Using the MENU, ENTER, and + + + +/---- buttons Adjusting the contrast and 1 Select the menu you want to adjust. brightness (CONTRAST/ Press the +/- buttons to highlight the desired menu. Press the BRIGHTNESS) ENTER button to select the menu and adjustment items. These settings are stored in memory for all input signals. MENU MENU 1 Press either one of the 6 (CONTRAST) + + + +/---- buttons. The CONTRAST/BRIGHTNESS menu appears on the b ENTER ENTER screen. CONTRAST / BR I GHTNESS CONTRAST 26
Streszczenie treści zawartej na stronie nr. 10
Adjusting the horizontal size or Adjusting the curvature of the centering of the picture (H-SIZE/ picture’s sides (PIN/PIN BALANCE) CENTER) These settings are stored in memory for the current input signal. These settings are stored in memory for the current input signal. 1 Press the MENU button. The main MENU appears on the screen. 1 Press the MENU button. The main MENU appears on the screen. 2 Press the + + + +/---- buttons to highlight PIN/PIN BALANCE, and press the ENTER button. 2 Press th
Streszczenie treści zawartej na stronie nr. 11
Adjusting the picture’s rotation Adjusting the color of the picture (ROTATION) (COLOR) This setting is stored in memory for all input signals. The COLOR settings allow you to adjust the picture’s color temperature by changing the color level of the white color field. 1 Press the MENU button. Colors appear reddish if the temperature is low, and bluish if the The main MENU appears on the screen. temperature is high. This adjustment is useful for matching the monitor’s colors to a printed pict
Streszczenie treści zawartej na stronie nr. 12
Additional settings (DEGAUSS/ Resetting the adjustments (RESET) CANCEL MOIRE) This monitor has the following two reset methods. Use the RESET menu to reset the adjustments. You can manually degauss (demagnetize) the screen, and cancel the moire. 1 Press the MENU button. The main MENU appears on the screen. 1 Press the MENU button. The main MENU appears on the screen. 2 Press the + + + +/---- buttons to highlight 0 RESET and press the ENTER button. 2 Press the + + + +/---- buttons to highlight
Streszczenie treści zawartej na stronie nr. 13
Technical Features Troubleshooting Before contacting technical support, refer to this section. Preset and user modes If thin lines appear on your screen When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the (damper wires) monitor’s memory to provide a high quality picture at the center of the screen. (See Appendix for a list of the factory preset The lines you are experiencing on your screen are normal for the modes.
Streszczenie treści zawartej na stronie nr. 14
Trouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 16) if the following recommendations do not resolve the problem. Symptom Check these items No picture If the 1 (power) indicator is not lit • Check that the power cord is properly connected. • Check that the 1 (power) switch is in the “on” position. If the NO INPUT SIGNAL message • Check that the v
Streszczenie treści zawartej na stronie nr. 15
Symptom Check these items Picture is ghosting • Eliminate the use of video cable extensions and/or video switch boxes. • Check that all plugs are firmly seated in their sockets. Picture is not centered or sized • Adjust the size or centering (page 10). Note that some video modes do not fill the screen properly to the edges. Edges of the image are curved • Adjust the shape of the picture (page 10). Wavy or elliptical pattern (moire) is • Cancel the moire (page 12). visible xProblems caused by th
Streszczenie treści zawartej na stronie nr. 16
Self-diagnosis function Specifications This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go CPD-110GS blank and the 1 (power) indicator will either light up green or CRT 0.25 mm aperture grille pitch flash orange. If the 1 (power) indicator is lit in orange, the 15 inches measured diagonally computer is in power saving mode. Try pressing any key on the 90-degree deflection keyboard. Viewable image size Approx. 285
Streszczenie treści zawartej na stronie nr. 17
Table des Matières Précautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identification des composants et des commandes . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1re étape: Raccordez le moniteur à l’ordinateur . . . . . . . . . . . . . . . 6 2e étape: Branchez le cordon d’alimentation . . . . . . . . . . . . . . . . . . 6 3e étape: Mettez le moniteur et l’ordinateur sous t
Streszczenie treści zawartej na stronie nr. 18
Entretien Précautions • Nettoyez l’écran à l’aide d’un chiffon doux. Si vous utilisez un produit nettoyant pour vitres, n’utilisez aucun type de produit Avertissement sur le raccordement à la source contenant une solution antistatique ou des additifs similaires d’alimentation parce que vous risquez sinon de rayer le revêtement de l’écran. • Utilisez le cordon d’alimentation fourni. Si vous utilisez un • Ne frottez pas, ne touchez pas et ne tapotez pas la surface de cordon d’alimentation dif
Streszczenie treści zawartej na stronie nr. 19
Identification des composants et des commandes Pour plus de détails, reportez-vous aux pages indiquées entre parenthèses. Avant Arrière MENU ENTER 1 Touche MENU (page 9) 5 Connecteur AC IN (page 6) Cette touche affiche l’écran MENU. Ce connecteur assure l’alimentation du moniteur. 2 Touche ENTER (page 9) 6 Connecteur d’entrée vidéo (HD15) (page 6) Cette touche sélectionne le menu et les paramètres de réglage. Ce connecteur assure l’entrée des signaux vidéo RVB FR (0,700 Vp-p, positifs) et des
Streszczenie treści zawartej na stronie nr. 20
2e étape: Branchez le cordon Installation d’alimentation Avant de mettre ce moniteur en service, vérifiez si tous les Le moniteur et l’ordinateur étant hors tension, branchez d’abord accessoires suivants se trouvent bien dans le carton: le cordon d’alimentation sur le moniteur et ensuite sur une prise • Cordon d’alimentation (1) murale. • Windows Monitor Information Disk (1) • Carte de garantie (1) • Remarques sur l’entretien de la surface de l’écran (1) • Ce mode d’emploi (1) 1re étape: Rac
