Streszczenie treści zawartej na stronie nr. 1
®
A7V133
A7V133-C
JumperFree™ PC133/VC133
200/266MHz FSB AGP Pro/4X
Socket A Motherboard
USER’S MANUAL
A7V133: INCLUDES Promise IDE ATA-100/RAID 0/1 chip
A7V133-C: DOES NOT INCLUDE Promise IDE ATA-100/RAID 0/1 chip
Streszczenie treści zawartej na stronie nr. 2
USER'S NOTICE No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EI- THER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED W
Streszczenie treści zawartej na stronie nr. 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2893-7775 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Addre
Streszczenie treści zawartej na stronie nr. 4
CONTENTS 1. INTRODUCTION 7 1.1 How This Manual Is Organized ................................................... 7 1.2 Item Checklist .............................................................................. 7 2. FEATURES 8 2.1 The ASUS A7V133 ...................................................................... 8 2.1.1 Specifications ..................................................................... 8 2.1.2 Special Features .............................................................
Streszczenie treści zawartej na stronie nr. 5
CONTENTS 4.3.1 Primary & Secondary Master/Slave...................................55 4.3.2 Keyboard Features............................................................. 58 4.4 Advanced Menu ......................................................................... 60 4.4.1 Chip Configuration .......................................................... 63 4.4.2 I/O Device Configuration................................................. 66 4.4.3 PCI Configuration....................................
Streszczenie treści zawartej na stronie nr. 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Streszczenie treści zawartej na stronie nr. 7
1. INTRODUCTION 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEATURES Production information and specifications 3. HARDWARE SETUP Intructions on setting up the motherboard. 4. BIOS SETUP Intructions on setting up the BIOS 5. SOFTWARE SETUP Intructions on setting up the included software 6. SOFTWARE REFERENCE Reference material for the included software 7. APPENDIX Optional items and general reference 1.2
Streszczenie treści zawartej na stronie nr. 8
2. FEA TURES Specifications 2. FEATURES 2.1 The ASUS A7V133 / A7V133-C The ASUS A7V133 motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • AMD Athlon™/Duron™ Processor Support: Supports Socket A-based AMD Athlon™/Duron™ processors. • North Bridge System Chipset: Features the VIA VT8363A (VIA Apollo KT133A) system controller with support for a 200/266MHz Front Side Bus (FSB); up to 1.5GB of PC133/
Streszczenie treści zawartej na stronie nr. 9
2. FEATURES • UltraDMA/100 Support: Comes with an onboard PCI Bus Master IDE con- troller with two connectors that support four ATA100/66/33 devices on two chan- nels. Supports UltraDMA/100, UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and Enhanced IDE devices, such as DVD- ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives. • Wake-On-LAN Connector: Supports Wake-On-LAN activity through an op- tional ASUS PCI-L101 10/100 Fast Ethernet PCI card (see 7. Appendix). •
Streszczenie treści zawartej na stronie nr. 10
2. FEA TURES Performance 2. FEATURES 2.1.2 Special Features • ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more Energy Saving Features for operating systems that support OS Direct Power Management (OSPM) functions. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. To maximize functions, an ACPI-supported OS, like Windows 98 must be used. • Easy Installation: Incorporates BIOS that supports autodetect
Streszczenie treści zawartej na stronie nr. 11
2. FEATURES 2.1.4 Intelligence • Auto Fan Off: The system fans will power off automatically even in sleep mode if set in the BIOS menu. This function reduces both energy consumption and system noise, and is an important feature in implementing silent PC sys- tems. • Dual Function Power Button: Pushing the power button for less than 4 sec- onds when the system is in the working state places the system into one of two states: sleep mode or soft-off mode, depending on the BIOS or OS setting (see P
Streszczenie treści zawartej na stronie nr. 12
2. FEA TURES Motherboard Parts 2. FEATURES 2.2 Motherboard Components See opposite page for locations. Location Processor Support Socket A for Socket A AMD Athlon/Duron Processors ........... 3 (NOTE: the CPU thermal sensor is integrated on the mother- board, located near the center of the CPU heat source, just below the CPU socket) Feature Setting DIP Switches ................................................... 6 Chipsets VIA VT8363A (VIA Apollo KT133A) system controller ......... 2 VIA VT82C
Streszczenie treści zawartej na stronie nr. 13
2. FEATURES 2.2.1 Component Locations 1 2 3 4 5 6 7 8 28 27 26 25 24 23 22 21 20 19 - 18 17 16 15 14 13 12 1110 9 ASUS A7V133 User’s Manual 13 2. FEA TURES Motherboard Parts
Streszczenie treści zawartej na stronie nr. 14
3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.1 Motherboard Layout 24.5cm (9.64in) JTPWR PWR_FAN PS/2 VIO T: Mouse B: Keyboard USB 3VSBSLT T: Port0 B: Port1 CLRTC COM1 CR2032 3V Lithium Cell CMOS Power CHA_FAN DIP Switches DSW DSFID VID4 VID3 VID2 VID1 COM2 CPU_FAN Line VIA Out F_FAN VT8363A Line AGP4X & In PC133 Memory Mic Controller In SECONDARY IDE 5 4 3 2 1 0 Row AUX Accelerated Graphic Port (AGP PRO) PLED SMB MIC2 PCI Slot 1 Audio Codec VIA VT82C686B PCI Slot 2 MODEM PCI Slo
Streszczenie treści zawartej na stronie nr. 15
3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) DSW p. 18 DIP Switches 2) JEN p. 18 JumperFree Mode (JumperFree/Jumper Mode) 3) AUDIOCODEC p. 19 Onboard Audio Setting (Enable/Enable) (optional) 4) 3VSBSLT p. 20 PCI 3Volt Setting (3 Volt/3 VSB) 5) ATA100 / RAID 0 or 1 p. 20 Promise ATA100 / RAID 0 or 1 Controller Setting 6) VIO p. 21 I/O Voltage Setting (3.30 Volt/3.45 Volt/test mode) 7) DSW 1–4 p. 22 CPU External Frequency Setting 8) DSFID 1–4 p. 23 CPU Core: BUS Frequency M
Streszczenie treści zawartej na stronie nr. 16
3. H/W SETUP Layout Contents 3. HARDWARE SETUP 16) MIC2 p. 40 Internal Microphone Header (3 pin) (optional) 17) USBPORT p. 41 USB Headers (10-1 pin) 18) SMB p. 41 SMBus Connector (5-1 pin) 19) ATXPWR p. 42 ATX Power Supply Connector (20 pin) 20) JTPWR p. 42 Power Supply Thermal Sensor Connector (2 pin) 21) IDELED p. 43 IDE Activity LED (2 pin) 22) SPEAKER (PANEL) p. 44 System Warning Speaker Connector (4 pin) 23) PWR.LED (PANEL) p. 44 System Power LED Lead (3 pin) 24) MSG.LED (PANEL) p. 44 Syst
Streszczenie treści zawartej na stronie nr. 17
3. HARDWARE SETUP 3.3 Hardware Setup Procedure Before using your computer, you must complete the following steps: 1. Check Motherboard Settings 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Panel Wires, and Power Supply 6. Setup the BIOS Software 3.4 Motherboard Settings This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers. WARNING! Computer mothe
Streszczenie treści zawartej na stronie nr. 18
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 1) Motherboard Features Settings (DIP Switches - DSW) The motherboard’s onboard functions are adjusted through the DIP switches The white block represents the switch’s position. The example below shows all the switches in the ON position. The default setting is OFF. DSW 5 4 3 2 1 OFF ON ON 1. Frequency Selection 2. Frequency Selection A7V133 3. Frequency Selection 4. Frequency Selection 5. Frequency Selection A7V133 DIP Swi
Streszczenie treści zawartej na stronie nr. 19
3. HARDWARE SETUP 3) Onboard Audio Setting (AUDIOCODEC) The onboard audio CODEC may be enabled or disabled using all of these jump- ers. Disable the onboard audio CODEC if you are using a PCI audio card on any of the expansion slots or a primary AMR on the AMR slot. If using a PCI audio expansion card, Onboard AC’97 Audio Controller in 4.4.2 I/O Device Con- figuration of the BIOS must also be disabled. NOTE: This setting is available only on motherboards with the onboard audio option. Setting A
Streszczenie treści zawartej na stronie nr. 20
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 4) PCI 3Volt Setting (3VSBSLT) This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power, set this jumper to 3 VSB. Setting 3VSBSLT 3 Volt [1-2] 3 VSB [2-3] (default) 3VSBSLT 1 2 2 3 Add 3 Volt Add 3 VSB (Default) A7V133 A7V133 PCI 3Volt Selection 5) ATA100 / RAID 0 or 1 Setting (ATA100/RAID 0 or 1) Jumper 13 and 14 specifies the function of the Promise IDE controller. Changing th
