Instrukcja obsługi ZALMAN AMD Athlon/ Duron/Athlon XP Socket 462 CPU

Streszczenie treści zawartej na stronie nr. 1

User User s Manual s Manual
(English Edition)
Intel Pentium 4
Socket 478 CPU
AMD Athlon/
Duron/Athlon XP
Socket 462 CPU
AMD Athlon 64
Socket 754 CPU
ZM-WB2 Gold
* Please read before installation
http://www.zalman.co.kr http://www.zalmanusa.com

Streszczenie treści zawartej na stronie nr. 2

1. Features 1) Gold plated pure copper base maximizes cooling performance and prevents CPU blocks from galvanic corrosion 2) Intel Pentium 4 (Socket 478), AMD Athlon/Duron/Athlon XP (Socket 462),Athlon 64 (Socket 754) compatible design for broad compatibility. 3) Three types of compression fitting are offered for use with water tubes (8X10mm,8X11mm,10X13mm) * Zalman Tech. Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING. 2. Specifications Part No Part name Q’ t

Streszczenie treści zawartej na stronie nr. 3

3. Exploded View 1) Exploded view of CPU block a Block base Fittings a 2) Exploded view for CPU type using ZM-WB2 Gold Intel Pentium 4 AMD Athlon 64 AMD Athlon/ Socket 478 CPU Socket 754 CPU Duron/Athlon XP Socket 462 CPU 2

Streszczenie treści zawartej na stronie nr. 4

4. Components 1) Common Components CPU block - 1 pc. Hand screw - 2 pcs. Thermal grease - 1 pc. Clip - 1 pc. User’s manual Fittings - 6 pcs. (3 sets) 2) Components for Intel Pentium 4 (Socket 478) Two (2) Clip Supports for Socket 478 3) Components for AMD Athlon / Athlon XP (Socket 462) One (1) A -Type(blue) Clip Support for AMD Socket 462 One (1) B -Type(white) Clip Support for AMD Socket 462 Four Bolts - For Fastening Clip Supports One Set of Washers 4) Components for AMD Athlon

Streszczenie treści zawartej na stronie nr. 5

5. Compatible CPU Types 1) Intel Pentium 4 - Socket 478 All speeds of Pentium 4 Socket 478 CPUs Caution As shown in Figure 2, a mainboard that is not compliant with the “10.2 mm mainboard component height restriction” standard, introduced by Intel, may create interference between components and the clip. Please do not install the ZM-WB2 when this interference is observed. 10.2mm Motherboard component height restriction Clip Mainboard component Top ViewTop View Clip Mainboard component Side

Streszczenie treści zawartej na stronie nr. 6

6. Cautions During Installation 1) Keep this product away from children. 2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product outside its intended purpose.. 3) The exposed core of a Socket 462 CPU can be damaged if proper care is not taken. Read the “Installation” section thoroughly before installing. 4) Please do not install this product if ZM-WB2 interferes with any mainboard components. 5) Zalman Tech. Co., Ltd. is not responsible for any problems ari

Streszczenie treści zawartej na stronie nr. 7

3) Insert Hand screws Insert hand screws into the inner holes on the clip. Hand screw Outer hole Clip 4) Fasten Hand screws Inner hole Place the CPU block on the center of the CPU. Screw in both Hand screws in an alternating Clip fashion until they are completely tightened. 8. Installation-AMD XP/Duron, Socket 462 1) Install Clip spport Install the socket 462 clip supports as shown on the right. B-Type Clip Support (White) Be sure to install A -Type clip Paper A-Type Clip Support (Blue) supp

Streszczenie treści zawartej na stronie nr. 8

CPU 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU. Thermal Grease 3) Insert Hand screws Insert hand screws into the outer holes on the clip. 4) Fasten Hand screws Clip Outer hole Place the CPU block on the center of the CPU. Screw in both hand screws in an alternating A-Type Clip Support fashion until they are completely tightened. Inner hole B-Type Clip Support 9. Installation-AMD XP/Duron, Socket 462 1) Fasten Nipples Nipple Position the backplate on the bottom

Streszczenie treści zawartej na stronie nr. 9

CPU 2) Apply Thermal Grease Spread thermal grease thinly and evenly over the CPU. 3) Insert Hand screws Insert hand screws into the outer holes on the clip. Thermal Grease 4) Fasten Hand screws Place the CPU block on the center of the CPU. Partially screw the bolts into the nipples. Then, screw both bolts down further in an Hand screw alternating fashion until they are completely tightened. Clip Inner hole Outer hole 10. Build a noiseless system Creating a Complete Noiseless System Use t