Instrukcja obsługi Vantec 7.1 Channel PCIe Sound Card UGTS110

Streszczenie treści zawartej na stronie nr. 1

7.1 Channel PCIe Sound Card



User Manual
Model: UGT-S110



All brand names and trademarks are properties of their respective owners.

www.vantecusa.com

Streszczenie treści zawartej na stronie nr. 2

Features Full-duplex playback and recording Full-duplex 8CH DAC/2CH ADC Support 48/44.1 KHz sampling rate for both playback and recording Supports the latest Dolby® Digital EX and DTS ES 6.1/7.1 CH DVD soundtrack playback DirectSound™ 3 HW acceleration Compliant with PCI Express Base Specification 1.0a ACPI compliant power down management Support Windows® 2000/XP/2003/Vista/7 (32/64 bit) System Requirements PCI Express-enabled system with an available PCI Express slo

Streszczenie treści zawartej na stronie nr. 3

Installation Guide x 1 Driver CD x 1 * User’s Manual Is on Driver CD Note: Contents may vary depending on the market/country. Hardware Installation 1. Turn off the computer, Unplug the power cord. 2. Open the computer case. Check with your computer manufacturer if you need additional instructions. Remove any old third-party sound cards or the metal PCIe slot bracket. 3. Insert the sound card into a blank PCIe slot. Make sure that all of its pins are touching the PCIe slot’s contac

Streszczenie treści zawartej na stronie nr. 4

1. Start your PC, place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar and click Run. Type “D:\UGT-S110\2000_XP_2003_Vista_7\Setup.exe”. (Assuming you have placed the CD in CD-ROM drive labeled as D). 2. Follow any on-screen instructions to complete the software installation. 3. Restart your system. 4. Once you have rebooted the computer, this 7.1 Channel PCIe Sound card is ready to be used. Physical Connections UGT‐S110  Page 4 

Streszczenie treści zawartej na stronie nr. 5

The rear panel of this 7.1 Channel PCIe Sound Card has the following jacks: 1. Line In (blue): Connect to tape/CD/DVD player, or other audio sources for output mixing and/or recording 2. MIC In (pink): Connect to microphone 3. Line Out (green): Connect to headphone or amplifying speakers. In 4-channel, 6-channel, and 8-channnel configurations, the function of this port becomes Front Speaker Out 4. Rear-Speaker/Surround-Speaker (black): Connect to Rear speakers while 4/6/8 channel spea

Streszczenie treści zawartej na stronie nr. 6

5. Center/Subwoofer (orange): Connect to center/subwoofer speakers while 6/8 channel speaker mode is enabled (via external amplifier) 6. Back-Speaker (gray): Connect to back speakers while 8 channel speaker mode is enabled (via external amplifier) 7. S/PDIF Out: Connect to digital input of external audio device via an optical S/PDIF cable Please refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, 8-channel configuration. UGT‐S110  Page 6 

Streszczenie treści zawartej na stronie nr. 7

Port 2-channel 4-channel 6-channel 8-channel (*) Green Line Out Front Front Front Speaker Speaker Speaker Black - Rear Rear Rear Speaker Speaker Speaker Orange - - Center Center /Subwoofer /Subwoofer Gray - - - Back Speaker (*) 4-Channel mode is not available on Vista/7 (32/64 bit) In addition to the rear panel jacks, this 7.1 Channel PCIe Sound Card also has the following internal connection: The Function J3 Analog CD/IN Port(Signals: L-G-G-R) J5 Analog CD/IN Port(Signals: G

Streszczenie treści zawartej na stronie nr. 8

Warranty The Vantec 7.1 Channel PCIe Sound Card comes with a 1 year limited warranty(90 day parts). If your unit becomes defective within that time frame, please go to www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws. If any parts are missing or if there are cosmetic defects, p