Streszczenie treści zawartej na stronie nr. 1
AT-MIO/AI E Series
User Manual
Multifunction I/O Boards for the PC AT
May 1996 Edition
Part Number 320517E-01
Copyright 1994, 1996 National Instruments Corporation. All Rights Reserved.
Streszczenie treści zawartej na stronie nr. 2
Internet Support GPIB: gpib.support@natinst.com DAQ: daq.support@natinst.com VXI: vxi.support@natinst.com LabVIEW: lv.support@natinst.com LabWindows: lw.support@natinst.com HiQ: hiq.support@natinst.com E-mail: info@natinst.com FTP Site: ftp.natinst.com Web Address: http://www.natinst.com Bulletin Board Support BBS United States: (512) 794-5422 or (800) 327-3077 BBS United Kingdom: 01635 551422 BBS France: 1 48 65 15 59 FaxBack Support (512) 418-1111 Telephone Support (U.S.) Tel: (512) 795-8248 F
Streszczenie treści zawartej na stronie nr. 3
Important Information Warranty The AT-MIO/AI E Series boards are warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive National Instruments software are warranted not to fail to execute pr
Streszczenie treści zawartej na stronie nr. 4
Table of Contents About This Manual Organization of This Manual ........................................................................................xi Conventions Used in This Manual ................................................................................xii National Instruments Documentation ...........................................................................xiii Related Documentation ............................................................................................
Streszczenie treści zawartej na stronie nr. 5
Table of Contents Chapter 3 Hardware Overview Analog Input ................................................................................................................. 3-6 Input Mode ..................................................................................................... 3-6 Input Polarity and Input Range ...................................................................... 3-7 Considerations for Selecting Input Ranges ...................................... 3-10 Dither .......
Streszczenie treści zawartej na stronie nr. 6
Table of Contents Power Connections ........................................................................................................4-30 Timing Connections ......................................................................................................4-30 Programmable Function Input Connections ...................................................4-31 Data Acquisition Timing Connections ...........................................................4-32 SCANCLK Signal ..................
Streszczenie treści zawartej na stronie nr. 7
Table of Contents Appendix A Specifications AT-MIO-16E-1, AT-MIO-16E-2 and AT-MIO-64E-3 ................................................ A-1 AT-MIO-16E-10 and AT-MIO-16DE-10 .................................................................... A-11 AT-MIO-16XE-10 and AT-AI-16XE-10 ..................................................................... A-19 AT-MIO-16XE-50 ........................................................................................................ A-26 Appendix B Optional
Streszczenie treści zawartej na stronie nr. 8
Table of Contents Figure 4-1. I/O Connector Pin Assignment for the AT-MIO-16E-1, AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16XE-10, AT-AI-16XE-10, and AT-MIO-16XE-50 ..............................................4-2 Figure 4-2. I/O Connector Pin Assignment for the AT-MIO-64E-3 ..........................4-3 Figure 4-3. I/O Connector Pin Assignment for the AT-MIO-16DE-10 .....................4-4 Figure 4-4. AT E Series PGIA .............................................................................
Streszczenie treści zawartej na stronie nr. 9
Table of Contents Figure B-1. 68-Pin MIO Connector Pin Assignments ................................................ B-2 Figure B-2. 68-Pin DIO Connector Pin Assignments ................................................ B-3 Figure B-3. 68-Pin Extended Analog Input Connector Pin Assignments .................. B-4 Figure B-4. 50-Pin MIO Connector Pin Assignments ................................................ B-5 Figure B-5. 50-Pin DIO Connector Pin Assignments .....................................
Streszczenie treści zawartej na stronie nr. 10
About About This This Manual Manual This manual describes the electrical and mechanical aspects of each board in the AT E Series product line and contains information concerning their operation and programming. Unless otherwise noted, text applies to all boards in the AT E Series. The AT E Series includes the following boards: • AT-MIO-16E-1 • AT-MIO-16E-2 • AT-MIO-64E-3 • AT-MIO-16E-10 • AT-MIO-16DE-10 • AT-MIO-16XE-10 • AT-AI-16XE-10 • AT-MIO-16XE-50 The AT E Series boards are high-perform
Streszczenie treści zawartej na stronie nr. 11
About This Manual • Chapter 4, Signal Connections, describes how to make input and output signal connections to your AT E Series board via the board I/O connector. • Chapter 5, Calibration, discusses the calibration procedures for your AT E Series board. • Appendix A, Specifications, lists the specifications of each board in the AT E Series. • Appendix B, Optional Cable Connector Descriptions, describes the connectors on the optional cables for the AT E Series boards. • Appendix C, Common
Streszczenie treści zawartej na stronie nr. 12
About This Manual ¤ The ¤ indicates that the text following it applies only to specific AT E Series boards. <> Angle brackets containing numbers separated by an ellipsis represent a range of values associated with a bit, port, or signal name (for example, ACH<0..7> stands for ACH0 through ACH7). Abbreviations, acronyms, metric prefixes, mnemonics, symbols, and terms are listed in the Glossary at the end of this manual. National Instruments Documentation The AT-MIO/AI E Series User Manual is
Streszczenie treści zawartej na stronie nr. 13
About This Manual relevant pieces of the system. Consult these guides when you are making your connections. • SCXI chassis manuals—If you are using SCXI, read these manuals for maintenance information on the chassis and installation instructions. Related Documentation The following National Instruments document contains information you may find helpful: • Application Note 025, Field Wiring and Noise Considerations for Analog Signals Customer Communication National Instruments wants to rece
Streszczenie treści zawartej na stronie nr. 14
Chapter Introduction 1 This chapter describes the AT E Series boards, lists what you need to get started, describes the optional software and optional equipment, and explains how to unpack your AT E Series board. About the AT E Series Thank you for buying a National Instruments AT E Series board. The AT E Series boards are the first completely Plug and Play-compatible multifunction analog, digital, and timing I/O boards for the PC AT and compatible computers. This family of boards features
Streszczenie treści zawartej na stronie nr. 15
Chapter 1 Introduction timing event. The AT E Series boards have the Real-Time System Integration (RTSI) bus to solve this problem. The RTSI bus consists of our RTSI bus interface and a ribbon cable to route timing and trigger signals between several functions on as many as five DAQ boards in your PC. The AT E Series boards can interface to an SCXI system so that you can acquire over 3,000 analog signals from thermocouples, RTDs, strain gauges, voltage sources, and current sources.
Streszczenie treści zawartej na stronie nr. 16
Chapter 1 Introduction Software Programming Choices There are several options to choose from when programming your National Instruments DAQ and SCXI hardware. You can use LabVIEW, LabWindows/CVI, NI-DAQ, or register-level programming. LabVIEW and LabWindows/CVI Application Software LabVIEW and LabWindows/CVI are innovative program development software packages for data acquisition and control applications. LabVIEW uses graphical programming, whereas LabWindows/CVI enhances traditional
Streszczenie treści zawartej na stronie nr. 17
Chapter 1 Introduction NI-DAQ has both high-level DAQ I/O functions for maximum ease of use and low-level DAQ I/O functions for maximum flexibility and performance. Examples of high-level functions are streaming data to disk or acquiring a certain number of data points. An example of a low-level function is writing directly to registers on the DAQ device. NI-DAQ does not sacrifice the performance of National Instruments DAQ devices because it lets multiple devices operate at their pea
Streszczenie treści zawartej na stronie nr. 18
Chapter 1 Introduction You can use your AT E Series board, together with other PC, AT, EISA, DAQCard, and DAQPad Series DAQ and SCXI hardware, with NI-DAQ software for PC compatibles. Register-Level Programming The final option for programming any National Instruments DAQ hardware is to write register-level software. Writing register-level programming software can be very time-consuming and inefficient and is not recommended for most users. Even if you are an experienced register-level
Streszczenie treści zawartej na stronie nr. 19
Chapter 1 Introduction Custom Cabling National Instruments offers cables and accessories for you to prototype your application or to use if you frequently change board interconnections. If you want to develop your own cable, however, the following guidelines may be useful: • For the analog input signals, shielded twisted-pair wires for each analog input pair yield the best results, assuming that you use differential inputs. Tie the shield for each signal pair to the ground reference
Streszczenie treści zawartej na stronie nr. 20
Chapter 1 Introduction Unpacking Your AT E Series board is shipped in an antistatic package to prevent electrostatic damage to the board. Electrostatic discharge can damage several components on the board. To avoid such damage in handling the board, take the following precautions: • Ground yourself via a grounding strap or by holding a grounded object. • Touch the antistatic package to a metal part of your computer chassis before removing the board from the package. • Remove the board
