Streszczenie treści zawartej na stronie nr. 1
® ®
Intel StrongARM SA-1100
Microprocessor
Developer’s Manual
August 1999
Order Number: 278088-004
Streszczenie treści zawartej na stronie nr. 2
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, me
Streszczenie treści zawartej na stronie nr. 3
Contents 1 Introduction......................................................................................................................1-1 1.1 Intel® StrongARM® SA-1100 Microprocessor .................................................. 1-1 1.2 Overview............................................................................................................ 1-4 1.3 Example System................................................................................................ 1-5 1.4 ARM™ Ar
Streszczenie treści zawartej na stronie nr. 4
5.2.11 Registers 10 – 12 RESERVED............................................................. 5-6 5.2.12 Register 13 – Process ID Virtual Address Mapping.............................. 5-7 5.2.13 Register 14 – Debug Support (Breakpoints)......................................... 5-8 5.2.14 Register 15 – Test, Clock, and Idle Control.......................................... 5-9 6 Caches, Write Buffer, and Read Buffer...........................................................................6-1 6.
Streszczenie treści zawartej na stronie nr. 5
9 System Control Module...................................................................................................9-1 9.1 General-Purpose I/O.......................................................................................... 9-1 9.1.1 GPIO Register Definitions..................................................................... 9-2 9.1.1.1 GPIO Pin-Level Register (GPLR) ............................................ 9-3 9.1.1.2 GPIO Pin Direction Register (GPDR) ....................
Streszczenie treści zawartej na stronie nr. 6
9.5.3.6 Booting After Sleep Mode...................................................... 9-29 9.5.3.7 Reviving the DRAMs from Self-Refresh Mode ...................... 9-30 9.5.4 Notes on Power Supply Sequencing .................................................. 9-30 9.5.5 Assumed Behavior of an SA-1100 System in Sleep Mode................. 9-30 9.5.6 Pin Operation in Sleep Mode.............................................................. 9-32 9.5.7 Power Manager Registers ........................
Streszczenie treści zawartej na stronie nr. 7
10.5.3 DRAM Access Followed by a Refresh Operation............................. 10-25 10.6 PCMCIA Overview........................................................................................ 10-26 10.6.1 32-Bit Data Bus Operation............................................................... 10-27 10.6.2 External Logic for PCMCIA Implementation ................................... 10-28 10.6.3 PCMCIA Interface Timing Diagrams and Parameters ..................... 10-31 10.7 Initialization of
Streszczenie treści zawartej na stronie nr. 8
11.7.5.1Lines Per Panel (LPP) ......................................................... 11-36 11.7.5.2Vertical Sync Pulse Width (VSW)........................................ 11-36 11.7.5.3End-of-Frame Line Clock Wait Count (EFW)....................... 11-37 11.7.5.4Beginning-of-Frame Line Clock Wait Count (BFW)............. 11-37 11.7.6 LCD Controller Control Register 3.................................................... 11-39 11.7.6.1Pixel Clock Divider (PCD)....................................
Streszczenie treści zawartej na stronie nr. 9
11.8.3.1UDC Disable (UDD)............................................................. 11-64 11.8.3.2 UDC Active (UDA) .............................................................. 11-64 11.8.3.3Bit 2 Reserved ..................................................................... 11-64 11.8.3.4Endpoint 0 Interrupt Mask (EIM).......................................... 11-64 11.8.3.5Receive Interrupt Mask (RIM)............................................. 11-64 11.8.3.6Transmit Interrupt Mask (TI
Streszczenie treści zawartej na stronie nr. 10
11.9.1.5Data Field ............................................................................ 11-81 11.9.1.6CRC Field ............................................................................ 11-81 11.9.1.7Baud Rate Generation......................................................... 11-81 11.9.1.8Receive Operation............................................................... 11-82 11.9.1.9Transmit Operation.............................................................. 11-83 11.9.1.10Simult
Streszczenie treści zawartej na stronie nr. 11
11.9.9.5Receive Transition Detect Status (RTD) (read/write, noninterruptible)................................................ 11-99 11.9.9.6End of Frame Flag (EOF) (read-only, noninterruptible)................................................. 11-99 11.9.9.7CRC Error Status (CRE) (read-only, noninterruptible)............................................... 11-100 11.9.9.8Receiver Overrun Status (ROR) (read-only, noninterruptible)............................................... 11-100 11.9.10 UAR
Streszczenie treści zawartej na stronie nr. 12
11.10.10.4Transmit FIFO Service Request Flag (TFS) (read-only, maskable interrupt).......................................... 11-122 11.10.10.5Receive FIFO Service Request Flag (RFS) (read-only, maskable interrupt).......................................... 11-122 11.10.10.6Framing Error Status (FRE) (read/write, nonmaskable interrupt)................................... 11-123 11.10.11HSSP Status Register 1 ................................................................ 11-124 11.10.11.1Receive
Streszczenie treści zawartej na stronie nr. 13
11.11.7.2Receive FIFO Service Request Flag (RFS) (read-only, maskable interrupt).......................................... 11-139 11.11.7.3Receiver Idle Status (RID) (read/write, maskable interrupt) ......................................... 11-140 11.11.7.4Receiver Begin of Break Status (RBB) (read/write, nonmaskable interrupt) ................................... 11-140 11.11.7.5Receiver End of Break Status (REB) (read/write, nonmaskable interrupt)11-140 11.11.7.6Error in FIFO Flag (EIF) (rea
Streszczenie treści zawartej na stronie nr. 14
11.12.6.1Audio Transmit FIFO Service Request Flag (ATS) (read-only, maskable interrupt).......................................... 11-163 11.12.6.2Audio Receive FIFO Service Request Flag (ARS) (read-only, maskable interrupt).......................................... 11-163 11.12.6.3Telecom Transmit FIFO Service Request Flag (TTS) (read-only, maskable interrupt).......................................... 11-164 11.12.6.4Telecom Receive FIFO Service Request Flag (TRS) (read-only, maskable interrup
Streszczenie treści zawartej na stronie nr. 15
11.12.12.1Transmit FIFO Not Full Flag (TNF) (read-only, noninterruptible)............................................... 11-181 11.12.12.2Receive FIFO Not Empty Flag (RNE) (read-only, noninterruptibl11-181 11.12.12.3SSP Busy Flag (BSY) (read-only, noninterruptible)............................................... 11-181 11.12.12.4Transmit FIFO Service Request Flag (TFS) (read-only, maskable interrupt)............................................ 1-181 11.12.12.5Receive FIFO Service Request Flag (R
Streszczenie treści zawartej na stronie nr. 16
16.4 Instruction Register.......................................................................................... 16-2 16.5 Public Instructions ........................................................................................... 16-2 16.5.1 EXTEST (00000) ................................................................................ 16-3 16.5.2 SAMPLE/PRELOAD (00001) ............................................................. 16-3 16.5.3 CLAMP (00100)................................
Streszczenie treści zawartej na stronie nr. 17
Figures 1-1 SA-1100 Features.............................................................................................. 1-1 1-2 SA-1100 Example System................................................................................. 1-5 2-1 SA-1100 Block Diagram .................................................................................... 2-2 2-2 SA-1100 Functional Diagram............................................................................. 2-3 2-3 SA-1100 Memory Map............
Streszczenie treści zawartej na stronie nr. 18
11-24 HP-SIR Modulation Example....................................................................... 11-104 11-25 UART Frame Format for IrDA Transmission (<= 115.2 Kbps) .................... 11-105 11-26 4PPM Modulation Encodings ...................................................................... 11-105 11-27 4PPM Modulation Example ......................................................................... 11-106 11-28 High-Speed Serial Frame Format for IrDA Transmission (4.0 Mbps)..........
Streszczenie treści zawartej na stronie nr. 19
10-5 DRAM Memory Size Options......................................................................... 10-14 10-6 DRAM Row/Column Address Multiplexing .................................................... 10-14 11-1 Peripheral Control Modules’ Register Width and DMA Port Size .................... 11-2 11-2 Peripheral Units’ Base Addresses ................................................................... 11-3 11-3 Peripheral Units’ Interrupt Numbers ..............................................
Streszczenie treści zawartej na stronie nr. 20
