Streszczenie treści zawartej na stronie nr. 1
GA-8I865GVMK-775
® ®
Intel Pentium 4 LGA775 Processor Motherboard
User's Manual
Rev. 1002
12ME-I865GVMKT-1002
Streszczenie treści zawartej na stronie nr. 2
Motherboard GA-8I865GVMK-775 Motherboard GA-8I865GVMK-775 June 15, 2005 June 15, 2005
Streszczenie treści zawartej na stronie nr. 3
Copyright © 2006 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In
Streszczenie treści zawartej na stronie nr. 4
Table of Contents GA-8I865GVMK-775 Motherboard Layout ..................................................................... 6 Block Diagram ................................................................................................................ 7 Chapter 1 Hardware Installation .................................................................................... 9 1-1 Considerations Prior to Installation .................................................................... 9 1-2 Feature Su
Streszczenie treści zawartej na stronie nr. 5
Chapter 3 Drivers Installation ...................................................................................... 45 3-1 Install Chipset Drivers .................................................................................... 45 3-2 Software Application ....................................................................................... 46 3-3 Software Information ....................................................................................... 46 3-4 Hardware Information ......
Streszczenie treści zawartej na stronie nr. 6
GA-8I865GVMK-775 Motherboard Layout KB_MS LGA775 ATX_12V ATX CPU_FAN FDD R_USB LPC47M997 Intel 865GV AUDIO F_AUDIO BAT PCI1 EP82562G Intel ICH5 BIOS SATA0 PCI2 SATA1 IR SPDIF CODEC PCI3 PWR_LED F_USB1 F_USB2 CD_IN COMB F_PANEL - 6 - VGA USB COMA LPT LAN GA-8I865GVMK-775 DDR1 DDR2 DDR3 DDR4 IDE2 IDE1 SYS_FAN CLR_CMOS
Streszczenie treści zawartej na stronie nr. 7
Block Diagram CPUCLK+/-(133/200MHz) LGA775 Processor Host Interface VGA DDR 400/333/266MHz DIMM Dual Channel Memory Intel 865GV HCLK (133/200MHz) GMCH GMCHCLK (66MHz) 66MHz 33MHz 14.318MHz 48MHz BIOS PCI Bus 2 Serial ATA Intel ICH5 ATA33/66/100 IDE Channels EP82562G Floppy RJ45 LPT Port LPC47M997 COM Ports CODEC PS/2 KB/Mouse 14.318MHz 8 USB 3 PCI Ports 33MHz PCICLK (33MHz) - 7 - MIC Line-Out Line-In
Streszczenie treści zawartej na stronie nr. 8
- 8 -
Streszczenie treści zawartej na stronie nr. 9
English Chapter 1Hardware Installation 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wear an electrostatic d
Streszczenie treści zawartej na stronie nr. 10
1-2 Feature Summary ® ® CPU Supports the latest Intel Pentium 4 LGA775 CPU Supports 800/533MHz FSB L2 cache varies with CPU ® Chipset Northbridge: Intel 865GV Chipset ® Southbridge: Intel ICH5 (Note) Memory 4 DDR DIMM memory slots (supports up to 4GB memory) Supports dual channel DDR 400/333/266 unbuffered DIMM Supports 2.5V DDR DIMM Slots 3 PCI slots IDE Connections 2 IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of 4 IDE devices FDD Connections 1 FDD connection, allows
Streszczenie treści zawartej na stronie nr. 11
English 1-3 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and heatsink. 4. Please make sure the heatsink is in
Streszczenie treści zawartej na stronie nr. 12
1-3-2 Installation of the Heatsink Male Push Pin The top of Female Push Pin Female Push Pin Fig.1 Fig. 2 Please apply an even layer of heatsink paste on (Turning the push pin along the direction of arrow is the surface of the installed CPU. to remove the heatsink, on the contrary, is to install.) Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan) Fig. 3 Fig. 4 Place the heatsink atop the CPU and ma
Streszczenie treści zawartej na stronie nr. 13
English 1-4 Installation of Memory Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be installed i
Streszczenie treści zawartej na stronie nr. 14
Dual Channel DDR GA-8I865GVMK-775 supports the Dual Channel Technology. After operating the Dual Channel Technology, the bandwidth of Memory Bus will double. GA-8I865GVMK-775 includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel A : DDR 1, DDR 2 Channel B : DDR 3, DDR 4 If you want to operate the Dual Channel Technology, please note the following explanations due to the limitation of Intel chipset specifications. 1. Dual channel memory cannot be used if one or thre
Streszczenie treści zawartej na stronie nr. 15
English 1-5 Installation of Expansion Cards You can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot br
Streszczenie treści zawartej na stronie nr. 16
1-6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. COMA (Serial Port) Connects to serial-based mouse or data processing devices. VGA Port Monitor can be connected to VGA port. USB port Before you connect your device(s) into USB connector(s), please
Streszczenie treści zawartej na stronie nr. 17
English 1-7 Connectors Introduction 12 3 5 6 11 9 17 4 16 13 7 8 12 15 14 10 1) ATX_12V 10) F_PANEL 2) ATX (Power Connector) 11) F_AUDIO 3) CPU_FAN 12) CD_IN 4) SYS_FAN 13) SPDIF 5) FDD 14) F_USB1 / F_USB2 6) IDE1 / IDE2 15) COMB 7) SATA0 / SATA1 16) IR 8) PWR_LED 17) CLR_CMOS 9) BAT - 17 - Hardware Installation
Streszczenie treści zawartej na stronie nr. 18
1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will not sta
Streszczenie treści zawartej na stronie nr. 19
English 3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN) power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cooler to prevent system ov
Streszczenie treści zawartej na stronie nr. 20
6) IDE1 / IDE2 (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device). 40 39 2 1 7) SATA0 / SATA1 (Serial ATA Connector) Serial ATA can
