Streszczenie treści zawartej na stronie nr. 1
Crestron DTT-15V3
DualTouch™ Technology Touchpanel
Operations Guide
Streszczenie treści zawartej na stronie nr. 2
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.
Streszczenie treści zawartej na stronie nr. 3
Crestron DTT-15V3 DualTouch™ Technology Touchpanel Contents DualTouch™ Technology Touchpanel: DTT-15V3 1 Introduction ...............................................................................................................................1 Features and Functions................................................................................................1 Applications.................................................................................................................2
Streszczenie treści zawartej na stronie nr. 4
Streszczenie treści zawartej na stronie nr. 5
Crestron DTT-15V3 DualTouch™ Technology Touchpanel DualTouch™ Technology Touchpanel: DTT-15V3 Introduction The DTT-15V3 is a 15" touchpanel designed for use with the UPX-2 Universal Presentation System to support all of the control capabilities of a Crestron touchpanel, plus pen-based annotation and computer-based multimedia presentation. Features and Functions • User interface for the Crestron UPX-2 Universal Presentation Processor • 15" LCD color touchscreen display • 1024 x 768 XG
Streszczenie treści zawartej na stronie nr. 6
DualTouch™ Technology Touchpanel Crestron DTT-15V3 Enhanced Ergonomics The DTT-15V3 features a completely flat bezel for drawing comfort and reduced overall size. The adjustable stand allows the touchpanel to be tilted between 17 and 73 degrees. The pressure-sensitive pen is both cordless and battery-free for performance and reliability. Versatile Installation Features The DTT-15V3 ships complete with tilt stand, cables, and power supply. Different installation options are available u
Streszczenie treści zawartej na stronie nr. 7
Crestron DTT-15V3 DualTouch™ Technology Touchpanel Specifications Specifications for the DTT-15V3 are listed in the following table. DTT-15V3 Specifications SPECIFICATION DETAILS Touchscreen Display TFT active matrix color LCD Display 15 inch (38.1 cm) diagonal Screen Size 1024 x 768 pixels (XGA) Resolution 16.2 million (18 bit + FRC) Color Depth 500:1 Contrast Ratio 2 250 nits (cd/m ) Brightness Viewing Angle ±70 degrees horizontal, -60 to +65 degrees vertical
Streszczenie treści zawartej na stronie nr. 8
DualTouch™ Technology Touchpanel Crestron DTT-15V3 3. When loading VisionTools Pro-e files or firmware through the RS-232 port of the control system, be sure that the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, Toolbox may post the “Transfer Failed” message. NOTE: Crestron software and any files on the website are for authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may be required to register to obtain access to certain a
Streszczenie treści zawartej na stronie nr. 9
Crestron DTT-15V3 DualTouch™ Technology Touchpanel DTT-15V3 Physical View 1.91 in (4.84 cm) 11.93 in (30.29 cm) 13.55 in (34.43 cm) DTT-15V3 Physical View – Right Side (Maximum and Minimum Height) 11.49 in (29.19 cm) 11.47 in (29.14 cm) 4.34 in (11.02 cm) 8.57 in 12.23 in (21.77 cm) (31.06 cm) Operations Guide – DOC. 6632B DualTouch™ Technology Touchpanel: DTT-15V3 • 5
Streszczenie treści zawartej na stronie nr. 10
DualTouch™ Technology Touchpanel Crestron DTT-15V3 DTT-15V3 Physical View – Rear (Stand Not Shown) DTT-15V3 Connectors, Controls & Indicators 8 10 9 6 6 1 2 3 4 5 7 6 • DualTouch™ Technology Touchpanel: DTT-15V3 Operations Guide – DOC. 6632B
Streszczenie treści zawartej na stronie nr. 11
Crestron DTT-15V3 DualTouch™ Technology Touchpanel Connectors, Controls & Indicators # CONNECTORS, DESCRIPTION CONTROLS & INDICATORS 1 USB (1) USB B female; USB 2.0 port; Pin 1 Pin 4 Connects to any USB port on UPX-2 using 6 ft (2.0 m) USB cable (included) PIN DESCRIPTION 1 +5 VDC Pin 2 Pin 3 2 Data - 3 Data + 4 Ground 2 DC IN (12V) (1) DC power jack (power supply included) 3 ANALOG RGB OUT (1) DB15HD female; RGB (VGA) video loop-thru; Passes RGB input through to an additi
Streszczenie treści zawartej na stronie nr. 12
DualTouch™ Technology Touchpanel Crestron DTT-15V3 Connectors, Controls & Indicators (Continued) # CONNECTORS, DESCRIPTION CONTROLS & INDICATORS 5 PEN TRAY Located on the bottom front edge of the touchpanel; Provides a convenient resting place for the pen. When the display stand is set to its lowest position, place your fingers beneath the tray and slide it out. 6 COMMUNICATIONS (2) Communications port for system PORT diagnostics; CAUTION: Do not connect any devices to this por
Streszczenie treści zawartej na stronie nr. 13
Crestron DTT-15V3 DualTouch™ Technology Touchpanel Industry Compliance As of the date of manufacture, the DTT-15V3 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, includi
Streszczenie treści zawartej na stronie nr. 14
DualTouch™ Technology Touchpanel Crestron DTT-15V3 Setup Configuring the Touchpanel NOTE: The only connection required to configure the touchpanel is power. Refer to “Hardware Hookup” on page 17 for details. The touchpanel display can be configured using the four setup buttons on the top of the DTT-15V3. Power is required to configure the touchpanel. Refer to “Hardware Hookup” on page 17 for information on connecting power. Onscreen Setup Buttons MENU - + ENTER The Menu button prov
Streszczenie treści zawartej na stronie nr. 15
Crestron DTT-15V3 DualTouch™ Technology Touchpanel 3. Phase – Use the (-)/(+) buttons to manually reduce horizontal distortion lines. The Reset option is used for automatic adjustment. Press Enter to save. Phase Control 4. Pitch – Use the (-)/(+) buttons to manually reduce vertical distortion lines. The Reset option is used for automatic adjustment. Press Enter to save. Pitch Control 5. Horizontal Center – Use the (-)/(+) buttons to manually move the image left or right. The Re
Streszczenie treści zawartej na stronie nr. 16
DualTouch™ Technology Touchpanel Crestron DTT-15V3 6. Vertical Center – Use the (-)/(+) buttons to manually move the image down or up. The Reset option is used for automatic adjustment. Press Enter to save. Vertical Center Control 7. Menu Position – Use the (-)/(+) buttons to move the menu to one of the available nine positions. Press Enter to save. Default is center position. Menu Position Control 8. Reset – Use AUTO ADJUST to reset only the image parameters (menus 1 through 6)
Streszczenie treści zawartej na stronie nr. 17
Crestron DTT-15V3 DualTouch™ Technology Touchpanel 9. Backlight – Use the (-)/(+) buttons to decrease or increase the backlight brightness. Press Enter to save. Default is 80. Backlight Control 10. Color – Provides a color temperature selection of 9300K, 6500K, 5000K, DIRECT (no adjustment to the incoming signal) and a USER option to use the independent RGB adjustment. Click the icon to allow an independent adjustment of red, green and blue. Press Enter to save. Defaults are shown as
Streszczenie treści zawartej na stronie nr. 18
DualTouch™ Technology Touchpanel Crestron DTT-15V3 11. Language – Use the (-)/(+) buttons to select a language for the display adjustment menus. Press Enter to save. Default is English. Language Control Supplied Equipment The DTT-15V3 is shipped with the following accessories. • (1) Pen (with five tip replacements) • (1) USB Cable; Approximately 6-feet long. • (1) VGA to VGA Cable; Approximately 6-feet long. • (1) Power Supply and Power Cable 14 • DualTouch™ Technology T
Streszczenie treści zawartej na stronie nr. 19
Crestron DTT-15V3 DualTouch™ Technology Touchpanel • (1) Pen Tether and Tether Hardware Installation VESA Mount The DTT-15V3 may be removed from the adjustable stand and remounted to a ® VESA conforming mount arm or stand. The Video Electronics Standards Association (VESA) is an international non-profit corporation that supports and sets industry-wide interface standards for the PC, workstation, and computing environments. VESA's Flat Display Mounting Interface (FDMI) Standard define
Streszczenie treści zawartej na stronie nr. 20
DualTouch™ Technology Touchpanel Crestron DTT-15V3 VESA Mounting Alternate Mounting Rear of DTT-15V3 Platform M4 Screws 4 mm wide 0.7 mm pitch 15 mm maximum length CAUTION: When attaching the DTT-15V3 to an alternate mounting platform, be sure to follow all instructions supplied by the manufacturer. Install Pen Tether The pen can be tethered to the DTT-15V3 using the supplied tether and tether hardware. • Use a flat-head screwdriver to mount the tether hardware to one of four teth
