Instrukcja obsługi Antec Minuet 350

Streszczenie treści zawartej na stronie nr. 1

Minuet 350
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario

Streszczenie treści zawartej na stronie nr. 2

At Antec, we continually refine and improve our products to ensure the highest quality. As such, your new product may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publi- cation, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures. For more comprehensive instructions on installing the motherboard and peripherals, pl

Streszczenie treści zawartej na stronie nr. 3

Although care has been taken to prevent sharp edges in your Antec case, we strongly recommend taking the appropriate time and caution when working with it. Please take reasonable precautions. MOTHERBOARD INSTALLATION This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. Lay the case down so that the open side is up. You should be able to see the drive cage and power supply. 2. Ma

Streszczenie treści zawartej na stronie nr. 4

CONNECTING THE USB PORTS You will find a single 10-pin connector on a cable attached to the front USB ports. This Intel standard connector is keyed so that it can’t be accidentally reversed as long as it is connected to a proper Intel standard motherboard header. Connect the 10-pin connector to your motherboard headers so that the blocked pin fits over the missing header pin. Motherboard USB Pin Layout 12 Pin Signal Names Pin Signal Names 1 USB Power 1 2 USB Power 2 3 Negative Signal 1 4 Ne

Streszczenie treści zawartej na stronie nr. 5

DRIVE INSTALLATION Minuet 350 incorporates a rapid-release Flip Up Drive Cage for easy drive installation. The Cage includes three drive bays: one external 5.25”, one external 3.5”, and one internal 3.5”. 1. Before installing the external drives, remove the external drive bay covers. a. To remove the external 5.25” drive bay cover, face the front of the case and use your left hand thumb to press firmly on the LEFT or outside edge of the left bay cover to release it. (See picture 3) Pictur

Streszczenie treści zawartej na stronie nr. 6

COOLING SYSTEM The Side 80mm TriCool™ fan: This case comes with one 80mm TriCool side fan installed. This fan has a three-speed switch that lets you choose the speed that best suits your needs. The default setting is Low. See the following specifications. Specifications: Size: 80 x 80 x 25.4mm Rated Voltage: 12V Operating Voltage: 10.2V ~ 13.8V Input Acoustical Input Speed Air Flow Static Pressure Current Noise Power High 0.2A 0.96 m³ / min 3.04 mm-H2O 30 dBA 2.4W 2600 RPM (Max.) (34 CFM)

Streszczenie treści zawartej na stronie nr. 7

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2007 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part withou