Streszczenie treści zawartej na stronie nr. 1
Product Manual
DB35.2 Serial ATA
ST3500841SCE
ST3400833SCE
ST3300822SCE
ST3250824SCE
ST3200827SCE
ST3160212SCE
ST3120213SCE
ST3802110SCE
100390003
Rev. C
August 2007
Streszczenie treści zawartej na stronie nr. 2
Copyright © 2005-2007 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100390003, Rev. C August 2007 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. DB35 Series, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or register
Streszczenie treści zawartej na stronie nr. 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summaries . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 4
ii DB35.2 Serial ATA Product Manual, Rev. C
Streszczenie treści zawartej na stronie nr. 5
List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 3. Breather filter hole location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 4. Serial ATA jumper block and connectors . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 6
Streszczenie treści zawartej na stronie nr. 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate DB35.2 Serial ATA (SATA) model drives: � ST3500841SCE � ST3400833SCE � ST3300822SCE � ST3250824SCE � ST3200827SCE � ST3160212SCE � ST3120213SCE � ST3802110SCE These drives provide the following key features: � Minimal acoustics for consumer storage usage profile. � Bedroom quiet performance. � Optimized power for consumer storage devices. � Spinup current limited to a maximum
Streszczenie treści zawartej na stronie nr. 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: � Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. � Thinner and more flexible cabling for improved enclosure airflow and ease of installation. � Scalability to higher performance levels. In addition, Serial ATA makes the transition f
Streszczenie treści zawartej na stronie nr. 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following models: ST3500841SCE ST3250824SCE ST3120213SCE ST3400833SCE ST3200827SCE ST3802110SCE ST3300822SCE ST3160212SCE 2.1 Specification summaries The specifications listed in tables 1 and 2 are for quick reference. For details on specification measurement o
Streszczenie treści zawartej na stronie nr. 10
Table 1: Drive specifications for 500 and 400 Gbyte models Drive specification ST3500841SCE ST3400833SCE Formatted Gbytes (512 bytes/sector)* 500 400 Guaranteed sectors 976,773,168 781,422,768 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density in BPI (kbits/inch max) 790.1 Track density TPI (ktracks/inch avg) 124.5 2 Areal density (Gbits/inch avg) 97.96 Spindle speed (RPM) 7,200 Internal data transfer rate (Mbits/sec max) 815
Streszczenie treści zawartej na stronie nr. 11
Table 1: Drive specifications for 500 and 400 Gbyte models Drive specification ST3500841SCE ST3400833SCE Altitude, nonoperating –60.96 m to 12,192 m (meters below mean sea level, max) (–200 ft to 40,000+ ft) Shock, operating (max at 2 msec) 63 Gs Shock, nonoperating (max at 2 msec) 300 Gs Vibration, operating 5-22 Hz: +/-0.25”, Displacement limited 22-350 Hz: 0.5 Gs 350-500 Hz: 0.25 Gs Vibration, nonoperating 5-22 Hz: +/-0.25”, Displacement limited 23-350 Hz: 5.0 Gs 351-500 Hz: 1.0 Gs Drive aco
Streszczenie treści zawartej na stronie nr. 12
Table 2: Drive specifications for 300, 250 and 200 Gbyte models Drive specification ST3300822SCE ST3250824SCE ST3200827SCE Formatted Gbytes (512 bytes/sector)* 300 250 200 Guaranteed sectors 586,072,368 488,397,168 390,721,968 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density in BPI (kbits/inch max) 790.1 Track density TPI (ktracks/inch avg) 124.5 2 Areal density (Gbits/inch avg) 97.69 Spindle speed (RPM) 7,200 Internal data
Streszczenie treści zawartej na stronie nr. 13
Table 2: Drive specifications for 300, 250 and 200 Gbyte models Drive specification ST3300822SCE ST3250824SCE ST3200827SCE Altitude, nonoperating –60.96 m to 12,192 m (meters below mean sea level, max) (–200 ft to 40,000+ ft) Shock, operating (max at 2 msec) 63 Gs Shock, nonoperating (max at 2 msec) 350 Gs Vibration, operating 5-22 Hz: +/-0.25”, Displacement limited 22-350 Hz: 0.5 Gs 350-500 Hz: 0.25 Gs Vibration, nonoperating 5-22 Hz: +/-0.25”, Displacement limited 22-350 Hz: 5.0 Gs 350-500 Hz
Streszczenie treści zawartej na stronie nr. 14
Table 3: Drive specifications for 160, 120, and 80 Gbyte models Drive specification ST3160212SCE ST3120213SCE ST3802110SCE Formatted Gbytes (512 bytes/sector)* 160 120 80 Guaranteed sectors 312,581,808 234,441,648 156,301,488 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density in BPI (kbits/inch max) 840.0 Track density TPI (ktracks/inch avg) 141.5 2 Areal density (Gbits/inch avg) 119.0 Spindle speed (RPM) 7,200 Internal data
Streszczenie treści zawartej na stronie nr. 15
Table 3: Drive specifications for 160, 120, and 80 Gbyte models Drive specification ST3160212SCE ST3120213SCE ST3802110SCE Altitude, nonoperating –60.96 m to 12,192 m (meters below mean sea level, max) (–200 ft to 40,000+ ft) Shock, operating (max at 2 msec) 63 Gs Shock, nonoperating (max at 2 msec) 350 Gs Vibration, operating 5-22 Hz: 0.25 Gs, Limited displacement 22-350 Hz: 0.5 Gs 350-500 Hz: 0.25 Gs Vibration, nonoperating 5-22 Hz: 0.25 Gs, Limited displacement 23-350 Hz: 5.0 Gs 351-500 Hz:
Streszczenie treści zawartej na stronie nr. 16
2.2 Formatted capacity Model Formatted capacity* Guaranteed sectors Bytes per sector ST3500841SCE 500 Gbytes 976,773,168 512 ST3400833SCE 400 Gbytes 781,422,768 512 ST3300822SCE 300 Gbytes 586,072,368 512 ST3250824SCE 250 Gbytes 488,397,168 512 ST3200827SCE 200 Gbytes 390,721,968 512 ST3160212SCE 160 Gbytes 312,581,808 512 ST3120213SCE 120 Gbytes 234,441,648 512 ST3802110SCE 80 Gbytes 156,301,488 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capaci
Streszczenie treści zawartej na stronie nr. 17
ST3160212SCE, ST3120213SCE, ST3802110SCE 119.0 Spindle speed (RPM) (± 0.2%) 7,200 Internal data-transfer rate (Mbits/sec max) ST3500841SCE, ST3400833SCE 815.2 ST3300822SCE, ST3250824SCE, ST3200827SCE, 867.2 ST3160212SCE, ST3120213SCE, ST3802110SCE Sustained data transfer rate (Mbytes/sec max) ST3500841SCE, ST3400833SCE 65.0 ST3300822SCE, ST3250824SCE, ST3200827SCE 76.6 ST3160212SCE, ST3120213SCE, ST3802110SCE 83.0 I/O data-transfer rate (Mbytes/sec max) 300 Cache buffer ST3500841SCE, ST3400833SC
Streszczenie treści zawartej na stronie nr. 18
2.5 Physical characteristics Drive specification Maximum height (mm) 26.1 (inches) 1.028 Maximum width (mm) 101.6 (inches) 4.000 +/- 0.010 Maximum length (mm) 146.99 (inches) 5.787 Maximum weight ST3500841SCE 710 grams (1.57 lbs) ST3400833SCE ST3300822SCE 655 grams (1.44 lbs) ST3250824SCE 580 grams (1.28 lbs) ST3200827SCE ST3160212SCE ST3120213SCE ST3802110SCE 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using d
Streszczenie treści zawartej na stronie nr. 19
2.7 Start/stop times Power-on to Ready (sec) 16 Standby to Ready (sec) 16 (max) Ready to spindle stop (sec) 10 (max) 2.8 Power specifications The drive receives DC power (+5V and +12V) through a native SATA power connector. See Figure 5 on page 25. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient tempera
Streszczenie treści zawartej na stronie nr. 20
Table 4: DC power requirements Power dissipation (typical) Example: ST3500841SCE Average (watts, 25° C) 5V typ amps 12V typ amps Spinup — — 2.0 (peak) Idle 8.00 0.353 0.519 Operating (Consumer Storage Profile) 9.20 0.587 0.520 Operating (PVR Storage Profile) 4.88 0.39 0.41 Seeking 12.60 0.613 0.795 Standby 0.80 0.106 0.023 Sleep 0.80 0.106 0.023 2.8.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current pro
