Streszczenie treści zawartej na stronie nr. 1
Product Manual
®
Seagate 600 Pro SSD
Standard 2.5” Standard 2.5”
Managed Life models Usage Based models
ST480FP0001 ST480FP0021
ST400FP0001 ST400FP0021
ST240FP0001 ST240FP0021
ST200FP0001 ST200FP0021
ST120FP0001 ST120FP0021
ST100FP0001 ST100FP0021
100727924
Rev. A
May 2013
Streszczenie treści zawartej na stronie nr. 2
Document Revision History Revision Date Description of changes Rev. A 05/10/2013 Initial release. © 2013 Seagate Technology LLC. All rights reserved. Publication number: 100727924, Rev. A May 2013 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate 600 Pro SSD and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United S
Streszczenie treści zawartej na stronie nr. 3
Contents Seagate® Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 4
FIGURES Figure 1. Typical 5V Startup and Operation Current Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 3. Mounting configuration dimensions (7mm models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 4. Air flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 5
® Seagate Technology Support Services For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers Warranty terms will vary based on type of warranty chosen: “Managed Life” or “Usage Based”. Consult your Seagate sales representative for warranty terms and conditions. For information regard
Streszczenie treści zawartej na stronie nr. 6
1.0 INTRODUCTION ® This manual describes the functional, mechanical and interface specifications for the following Seagate 600 Pro SSD model drives: 2.5" MANAGED LIFE MODEL 2.5" USAGE BASED MODEL ST480FP0001 ST480FP0021 ST400FP0001 ST400FP0021 ST240FP0001 ST240FP0021 ST200FP0001 ST200FP0021 ST120FP0001 ST120FP0021 ST100FP0001 ST100FP0021 These drives provide the following key features: • Multi-Level Cell (MLC) NAND Flash storage. • Serial ATA 3.1 Host Interface (SATA 6Gb/s). • High instanta
Streszczenie treści zawartej na stronie nr. 7
2.0 DRIVE SPECIFICATIONS Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: Capacity 480GB 400Gb 240GB 200GB 120GB 100GB 2.5” Managed Life Warranty ST480FP0001 ST400FP0001 ST240FP0001 ST200FP0001 ST120FP0001 ST100FP0001 2.5” Usage Based Warranty ST480FP0021 ST400FP0021 ST240FP0021 ST200FP0021 ST120FP0021 ST10
Streszczenie treści zawartej na stronie nr. 8
ST480FP0001 ST400FP0001 ST240FP0001 ST200FP0001 ST120FP0001 ST100FP0001 Drive specification ST480FP0021 ST400FP0021 ST240FP0021 ST200FP0021 ST120FP0021 ST100FP0021 –61 m to 3048 m Altitude, operating (–200 ft. to 10,000+ ft.) Altitude, nonoperating –61 m to 12,192 m (below mean sea level, max) (–200 ft to 40,000+ ft) Operational Shock (max at 0.5ms) 1000 Gs Non-Operational Shock (max at 0.5ms) 1000 Gs Vibration, random operating 20–2000 Hz: 11.08 Grms Vibration, random nonoperating 20–2000
Streszczenie treści zawartej na stronie nr. 9
2.4 PERFORMANCE, RECORDING AND INTERFACE TECHNOLOGY 2.4.1 Interface technology 480GB 400GB 240GB 200GB 120GB 100GB MODELS MODELS MODELS MODELS MODELS MODELS Interface Serial ATA (SATA-II) Interface Speeds 6Gb/s, 3Gb/s, 1.5Gb/s Supported Maximum Burst 600MB/s Transfer Rate Hot Plug Support Yes Native Command Yes Queuing Support Trim Support Yes Lifetime Endurance Yes Management Option 2.4.2 Recording technology Flash Memory Type NAND MLC Emulated LBA Size (Bytes) 512 Native Programmable P
Streszczenie treści zawartej na stronie nr. 10
When evaluating performance of SSD devices, it is recommended to measure performance of the device in a method that resembles the targeted application using real world data and workloads. Test time should also be adequately large to ensure that sustainable metrics and measures are obtained. 2.5 PHYSICAL CHARACTERISTICS 2.5” models Maximum height 7.00 mm (0.276 in) Maximum width 70.10 mm (2.760 in) Maximum length 100.45 mm (3.955 in) Max weight 100 g (0.220 lb) 2.6 ACCESS TIME Access meas
Streszczenie treści zawartej na stronie nr. 11
2.8 POWER SPECIFICATIONS The drive receives DC power (+5V) through a native SATA power connector. See Figure 2 on page 19. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, at 35°C ambient temperature. • Startup power Startup power is measured from the time of power-on to the time that the drive reaches operating condition and can pro- cess media access co
Streszczenie treści zawartej na stronie nr. 12
Table 3 400GB DC power requirements Parameter ST400FP00x1 (6.0Gb) Voltage +5V Power Regulation +/- 5% (watts) Average Idle Current 0.45 2.27 Average Sleep Current 0.10 0.52 Maximum Start Current DC (Peak DC) 0.58 2.89 AC (Peak AC) 0.98 4.90 Delayed Motor Start (DC max) 0.10 0.49 Peak Operating Current (random read): Typical DC 0.37 1.86 Maximum DC 0.38 1.90 Maximum DC (peak) 1.02 5.10 Peak Operating Current (random write): Typical DC 0.40 2.00 Maximum DC 0.43 2.14 Maximum DC (peak) 1.48 7.40
Streszczenie treści zawartej na stronie nr. 13
Table 4 240GB DC power requirements Parameter ST240FP00x1 (6.0Gb) Voltage +5V Power Regulation +/- 5% (watts) Average Idle Current 0.47 2.37 Average Sleep Current 0.10 0.49 Maximum Start Current DC (Peak DC) 0.56 2.78 AC (Peak AC) 0.90 4.50 Delayed Motor Start (DC max) 0.10 0.48 Peak Operating Current (random read): Typical DC 0.35 1.75 Maximum DC 0.37 1.83 Maximum DC (peak) 1.00 5.00 Peak Operating Current (random write): Typical DC 0.41 2.06 Maximum DC 0.46 2.31 Maximum DC (peak) 1.26 6.30
Streszczenie treści zawartej na stronie nr. 14
Table 5 200GB DC power requirements Parameter ST200FP00x1 (6.0Gb) Voltage +5V Power Regulation +/- 5% (watts) Average Idle Current 0.45 2.25 Average Sleep Current 0.09 0.47 Maximum Start Current DC (Peak DC) 0.56 2.80 AC (Peak AC) 0.88 4.40 Delayed Motor Start (DC max) 0.10 0.48 Peak Operating Current (random read): Typical DC 0.34 1.71 Maximum DC 0.36 1.80 Maximum DC (peak) 0.96 4.80 Peak Operating Current (random write): Typical DC 0.38 1.92 Maximum DC 0.42 2.11 Maximum DC (peak) 1.20 6.00
Streszczenie treści zawartej na stronie nr. 15
Table 6 120GB DC power requirements Parameter ST120FP00x1 (6.0Gb) Voltage +5V Power Regulation +/- 5% (watts) Average Idle Current 0.45 2.24 Average Sleep Current 0.09 0.46 Maximum Start Current DC (Peak DC) 0.53 2.66 AC (Peak AC) 0.96 4.78 Delayed Motor Start (DC max) 0.10 0.48 Peak Operating Current (random read): Typical DC 0.35 1.74 Maximum DC 0.36 1.81 Maximum DC (peak) 0.92 4.60 Peak Operating Current (random write): Typical DC 0.49 2.43 Maximum DC 0.50 2.52 Maximum DC (peak) 1.12 5.60
Streszczenie treści zawartej na stronie nr. 16
Table 7 100GB DC power requirements Parameter ST100FP00x1 (6.0Gb) Voltage +5V Power Regulation +/- 5% (watts) Average Idle Current 0.42 2.10 Average Sleep Current 0.09 0.46 Maximum Start Current DC (Peak DC) 0.54 2.68 AC (Peak AC) 0.89 4.46 Delayed Motor Start (DC max) 0.10 0.48 Peak Operating Current (random read): Typical DC 0.36 1.79 Maximum DC 0.36 1.80 Maximum DC (peak) 0.92 4.60 Peak Operating Current (random write): Typical DC 0.42 2.12 Maximum DC 0.43 2.17 Maximum DC (peak) 1.08 5.40
Streszczenie treści zawartej na stronie nr. 17
2.8.2.1 Typical current profiles Figure 1. Typical 5V Startup and Operation Current Profile SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. A 13
Streszczenie treści zawartej na stronie nr. 18
2.9 ENVIRONMENTAL SPECIFICATIONS 2.9.1 Temperature Temperature is defined as the drive's internal temperature as reported by SMART attribute 194 for operation or the drive case temperature for non-operating. Above 1000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3048 meters). Operating: 0° to 70°C (32° to 158°F) Nonoperating: –40° to 75°C (–40° to 167°F) 2.9.2 Temperature gradient Operating: 20°C per hour (30°F per hour max), without conde
Streszczenie treści zawartej na stronie nr. 19
2.9.6.1 Operating vibration The maximum random vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below. This specification does not cover connection issues that may result from testing at this level. 20–2000 Hz 11.08 Grms 2.9.6.2 Nonoperating vibration The maximum random nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently pu
Streszczenie treści zawartej na stronie nr. 20
2.11 RELIABILITY 2.11.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) The product shall achieve an Annualized Failure Rate - AFR - of 0.58%. AFR and MTBF are population statistics that are not relevant to individual units. AFR and MTBF specifications are based on the following assumptions: • 8760 power-on-hours per year. • 250 average power cycles per year. • Operations at nominal voltages. • Systems will provide adequate cooling to ensure the case temperatures do not e
