Streszczenie treści zawartej na stronie nr. 1
Preface
Precautions
Table of Contents
Product Outline
Accessories
Names of Parts
Connecting with a Computer
Basic Operations
Using the PC Card Drive
CD-10 with a Macintosh
Using the PC Card Drive CD-10
with IBM PC/AT Compatibles
E INSTRUCTION MANUAL
Troubleshooting
Specifications
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Getting Started Preface Thank you very much for purchasing the Minolta PCMCIA Card Drive CD-10. The Minolta PCMCIA Card Drive CD-10 can be connected to various makes of personal computers to read and write PC cards (PCMCIA/JEIDA specifications) and PC card adapter sets like the Minolta RM-2S/RM-4S SmartMedia™ image memory cards used with the Minolta CA-1S PC card adapter. The data recorded on a PC card with a digital still camera can be directly read into a personal computer. Please read these
Streszczenie treści zawartej na stronie nr. 4
Precautions This symbol means "WARNING" and indicates caution should be used. Please read and understand each warning message thoroughly before operating this equipment. Failure to follow warning messages may result in serious injury, fire, or equipment damage. Safety Precautions and handling Power cord - Do not bend the power cord excessively or place heavy objects on it. Damage to the cord may cause fire or electric shock. - Do not pull the cord itself to unplug; always hol
Streszczenie treści zawartej na stronie nr. 5
Getting Started Power source Use a standard domestic household power supply (100 to 240V, 50/60Hz). Proper places for use and storage - This unit is to be used at temperatures between +5 C and +40 C and at relative humidities between 20% and 80% (no condensation). - Do not use or store the unit in an excessively hot or cold place. - Do not use or store the unit in a dusty place or in direct sunlight. - Do not use or store the unit in a place subject to excessive vibra- ti
Streszczenie treści zawartej na stronie nr. 6
FCC Radio Frequency Interference Warning Notice for customers in U.S.A This equipment generates and uses radio frequency energy, and if not installed and used in strict accordance with the manufacturer’s instructions, can cause interference to radio and television reception. This equipment has been certified and found to comply with the limits for a Class B computing device in accordance with the specifi- cations in Subpart J of Part 15 of the FCC rules, which are designed to provide reasonable
Streszczenie treści zawartej na stronie nr. 7
Getting Started PC Cards Most PC cards compatible with PCMCIA/JEIDA standard specifi- cations (ATA cards and SRAM cards) can be used. A variety of prod- ucts are compatible with the PCMCIA/JEIDA specification, but the specifications are ambiguous and certain rules allow a large latitude. As a result, some PC cards may not conform with the read/write hardware and driver software. If you have questions about the com- patibility of specific brands, please contact us with the card type, manufacturer
Streszczenie treści zawartej na stronie nr. 8
TABLE OF CONTENTS Preface 1 Precautions 2 TABLE OF CONTENTS 6 1. Product Outline 7 Using with Macintosh computers 7 Using with IBM PC/AT compatible computers 7 2. Accessories 8 3. Names of Parts 9 4. Connecting with a Computer 11 Using without other SCSI devices 11 Using with other SCSI devices 12 Setting the SCSI ID 13 Turning on the power 14 5. Basic Operations 15 Inserting the PC card 15 Removing the PC card 17 6. Using with a Macintosh 19 Functions of Mac-PC Manager Lite 19
Streszczenie treści zawartej na stronie nr. 9
Getting Started 1. Product Outline This PC card drive is designed to be connected to a personal com- puter to read and write PC cards (ATA cards and SRAM cards). A SCSI interface is used to enable the device to be connected to a Ma- cintosh, IBM PC/AT compatible, and various other personal comput- ers. 1-1 Using with Macintosh computers Connect the card drive to the SCSI port, the standard Macintosh in- terface. Use the enclosed MAC-PC Manager Lite driver software as an option to mount removab
Streszczenie treści zawartej na stronie nr. 10
2. Accessories The PCMCIA Card Drive CD-10 package contains the following items: PCMCIA Card Drive CD-10 Mac-PC Manager™ Lite ASPIDISK floppy disk Contains Mac-PC Manager Lite, a Contains ASPIDISK.SYS, a software driver for connection with a software driver for connection with Macintosh computer. an IBM/PC compatible computer. AC Adapter PCMCIA Card Drive CD-10 User's Manual (this manual) Screwdriver to change SCSI Cable SCSI ID address (D-Sub25 pin to 50-pin Full-pitch) 8 ACCESS POWER LOCK
Streszczenie treści zawartej na stronie nr. 11
Getting Started 3. Names of Parts This drive unit consists of the following parts: FRONT PANEL 1 2 6 3 4 5 (1) Power Switch By sliding the switch back and forth from left to right, power is turned "on" and "off". (2) Power Indicator Lamp When power is on, light is green. (3) Access Indicator Lamp Indicates the access status of the PC card reader. When in a read/write state, the lamp is green (even if a PC card is not inserted in the slot, the lamp will blink occasionally) . (4) Lock Indicator La
Streszczenie treści zawartej na stronie nr. 12
4 3 2 1 0 REAR PANEL 9 7 10 8 (7) Terminator Switch When this switch is "on", the terminator is active. When this is the last device on a SCSI chain, the switch should be set to "on" (for further details see section 4 on "Connecting with a Computer"). (8) SCSI connector SCSI cable is connected here (D-Sub25 pin). (9) AC adapter plug Plug in AC adapter here. SCSI ID Switch SWITCH 0 1 2 3 4 5 6 7 8 9 SCSI ID 0 1 2 3 4 5 6 7 0 1 (10) SCSI ID switch Use this switch to
Streszczenie treści zawartej na stronie nr. 13
Connecting 4. Connecting with a Computer This drive unit connects to a computer through a SCSI ca- ble. There are two types of connection depending on whether or not an additional SCSI device is to be used. These two cases are discussed in this section. Note: There are several physical forms of SCSI connectors. Check the SCSI connector of the computer and SCSI device to be connected and procure a proper SCSI cable. For connection with an IBM PC/AT compatible computer, a SCSI board must have bee
Streszczenie treści zawartej na stronie nr. 14
3 NOTE: The cable included in this package is a D-Sub25 to 50-pin full-pitch, intended for use with most IBM PC/AT compatible computers. Macintosh users may require a D-Sub25 to D-Sub25 SCSI cable, available at most computer stores. 4-2 Using with other SCSI devices Since the SCSI standard supports connection to one computer and up to seven SCSI devices (including SCSI devices built into the computer), you can use several CD-10 card drives in series or can connect the CD-10 drive to other SCSI
Streszczenie treści zawartej na stronie nr. 15
Connecting 4-3 Setting the SCSI ID The SCSI ID is a unique number assigned to each SCSI device. Therefore, two devices must not have the same ID number. The SCSI ID is independent of the order of physical device connection. Note that SCSI IDs may have been previously assigned to a disk drive, CD-ROM drive, or other built-in devices in the computer. To obtain this information, refer to the related computer and SCSI de- vice manuals. Take care not to use the same ID number more than once. NOTE: Ch
Streszczenie treści zawartej na stronie nr. 16
than 3 may be assigned. The SCSI ID for the built-in hard disk drive and the computer cannot be changed. Also, notice the SCSI IDs for Macintosh computers range from 0 to 7, the numbers on the SCSI switch are 0 through 9. If 8 and 9 on the switch are selected, IDs 0 and 1 are assigned, respectively. For IBM PC/AT compatible computers SCSI IDs 0 and 1 may have been previously assigned to the built- in hard disk drive. Therefore, the values 2 through 6 are recommend- ed as SCSI IDs for this driv
Streszczenie treści zawartej na stronie nr. 17
Operating 5. Basic Operations This section describes the operation relating to PC cards and PC card sets. SmartMedia SSFDC cards (like Minolta's Image Memory Card RM-2S and RM-4S) can be used in the CD-10 card drive when used with an adapter, such as the PC Card Adapter CA-1S. When used together, the adapter and SmartMedia card are called a PC card set. PC cards cannot be used if the software driver is not in- stalled in the computer. If this is the case, install the soft- ware driver before us
Streszczenie treści zawartej na stronie nr. 18
first and then the PC card icon appears on the monitor. This is the “mounted” state, which enables read and write operations for the PC card set. The time required between card insertion and mounting depends on the card. Usually, the PC card set can be mounted within several sec- onds. The lock indicator lights when the card is mounted PC card icon is displayed (3) If the PC card or SmartMedia card is not formatted, the follow- ing box appears. Do not click on "Initialize". Unformatted cards
Streszczenie treści zawartej na stronie nr. 19
Operating 5-2 Removing the PC card set Make sure that the access indicator and lock indicator are not lit, then press the eject button to release the PC card set. access indicator lock indicator When the access indicator is lit In this case, the data is being read or written. Wait until the opera- tions complete; then remove the card set. Removing a PC card or PC card set during access operations will cause the data to be lost. When the lock indicator is lit The lock indicator differs betwee
Streszczenie treści zawartej na stronie nr. 20
NOTE: The access indicator may flash on and off even after the eject oper- ation. In this case, you can remove the PC card set. NOTE: Do not select the ÒEject DiskÓ command from the ÒSpecialÓ menu to remove the card set. The CD-10 drive does not have an eject motor. The disk must be ejected manually. For IBM PC/AT compatible computers: The lock indicator does not light in most cases. Remove the PC card set when the access in- dicator is not lit. NOTE: When you mount the PC card set with the EZ
