Streszczenie treści zawartej na stronie nr. 1
Product Manual
Pipeline HD.2 Series SATA
ST31000424CS
ST31000322CS
ST3500414CS
ST3500312CS
ST3250312CS
100529372
Rev. A
January 2009
Streszczenie treści zawartej na stronie nr. 2
Revision history Revision Date Sheets affected or comments Rev. A 01/07/09 Initial release. Copyright © 2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100529372, Rev. A January 2009 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pipeline HD.2 Series, SeaTools and SeaTDD are either trade- marks or registered trademarks of Seagate Technology LLC or one of its af
Streszczenie treści zawartej na stronie nr. 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary tables . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 4
ii Pipeline HD.2 Series SATA Product Manual, Rev. A
Streszczenie treści zawartej na stronie nr. 5
List of Figures Figure 1. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 3. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Figure 4. Mounting dimensions (for 1000 GB models). . . . . . .
Streszczenie treści zawartej na stronie nr. 6
Streszczenie treści zawartej na stronie nr. 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate TM Pipeline HD .2 Series model drive: ST31000322CS ST31000424CS ST3500312CS ST3500414CS ST3250312CS These drives provide the following key features: • High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). • Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology, for increased areal density. • State-of-the-art c
Streszczenie treści zawartej na stronie nr. 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
Streszczenie treści zawartej na stronie nr. 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model: ST31000322CS ST31000424CS ST3500312CS ST3500414CS ST3250312CS 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or definition, see the a
Streszczenie treści zawartej na stronie nr. 10
Table 1: Drive specifications summary for 1000 Gbyte models Drive specification ST31000424CS ST31000322CS Formatted capacity 1000 Gbytes (512 bytes/sector)* Guaranteed sectors 1,953,525,168 Heads 4 Discs 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1417 kbits/in max Track density 236 ktracks/in avg 2 Areal density 341.5 Gbits/in avg Spindle speed 5,900 RPM Internal data transfer rate 1285 Mbits/sec max Sustained da
Streszczenie treści zawartej na stronie nr. 11
Drive specification ST31000424CS ST31000322CS Operational Shock 70 Gs at 2 msec max Non-Operational Shock 350 Gs at 2 msec max Vibration, operating 5–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–350 Hz: 5.0 Gs 350–500 Hz:: 1.0 Gs Drive acoustics, sound power Idle** 2.1 bels (typical) 2.3 bels (max) CE Seek Profile 2.4 bels (typical) 2.5 bels (max) 15 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.55% Warranty To determine the warran
Streszczenie treści zawartej na stronie nr. 12
Table 2: Drive specifications summary for 500 and 250 Gbyte models Drive specification ST3500414CS ST3500312CS ST3250312CS Formatted capacity 500 Gbytes 250 Gbytes (512 bytes/sector)* Guaranteed sectors 976,773,168 488,397,168 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1417 kbits/in max Track density 236 ktracks/in avg 2 Areal density 341.5 Gbits/in avg Spindle speed 5,900 RPM Internal data transfe
Streszczenie treści zawartej na stronie nr. 13
Drive specification ST3500414CS ST3500312CS ST3250312CS Operational Shock 70 Gs at 2 msec max Non-Operational Shock 350 Gs at 2 msec max Vibration, operating 5–350 Hz: 0.50 Gs 350–500 Hz:: 0.25 Gs Vibration, nonoperating 5–350 Hz: 5.0 Gs 350–500 Hz:: 1.0 Gs Drive acoustics, sound power Idle** 1.9 bels (typical) 2.1 bels (max) CE Seek Profile 2.3 bels (typical) 2.4 bels (max) 15 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.55% Warranty To determine
Streszczenie treści zawartej na stronie nr. 14
2.2 Formatted capacity Formatted Guaranteed Model capacity* sectors Bytes per sector ST31000424CS 1000 Gbytes 1,953,525,168 ST31000322CS ST3500414CS 500 Gbytes 976,773,168 512 ST3500312CS ST3250312CS 250 Gbytes 488,397,168 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing the drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
Streszczenie treści zawartej na stronie nr. 15
2.5 Physical characteristics 1000 GB model 500 and 250GB model Maximum height 26.1 mm (1.028 inches) 20.20 mm (0.794 inches) Maximum width 101.85 mm (4.010 inches) Maximum length 146.99 mm (5.787 inches) Typical weight 600 grams (1.323 lb.) 380 grams (0.838 lb.) Cache buffer ST31000424CS and ST3500414CS 16 Mbytes (16,384 kbytes) ST31000322CS, ST3500312CS and ST3250312CS 8 Mbytes (8,192 kbytes) 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. Al
Streszczenie treści zawartej na stronie nr. 16
2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 3 on page 20. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operat
Streszczenie treści zawartej na stronie nr. 17
2.8.1.1 Typical current profiles Figure 1. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. • Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. • Using 5-volt power, the drive is expected to operate wi
Streszczenie treści zawartej na stronie nr. 18
2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Power modes Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled • Active mode The drive is in Active mode during the read/write and seek operation
Streszczenie treści zawartej na stronie nr. 19
2.9 Environmental specifications 2.9.1 Drive case temperature Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters). Drive case temperature should be measured at the location indicated in Figure 4 on page 21. Operating (Drive case temperature) 0° to 75°C (32° to 167°F) Nonoperating (Ambient *) –40° to 70°C (–40° to 158°F) * Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. 2
Streszczenie treści zawartej na stronie nr. 20
2.9.5 Shock All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.9.5.1 Operating shock The drives comply with the performance levels specified in this document when subjected to a maximum oper- ating shock of 70 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second. 2.9.5.2 Nonoperating shock The nonoperating shock level tha
