Streszczenie treści zawartej na stronie nr. 1
Hardware Maintenance Manual
IBM
xSeries 200
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Hardware Maintenance Manual IBM xSeries 200
Streszczenie treści zawartej na stronie nr. 4
Note: Before using this information and the product it supports, be sure to read the general information under “Notices” on page 141. Second Edition (May 2001) INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transacti
Streszczenie treści zawartej na stronie nr. 5
About this manual This manual contains diagnostic information, a Symptom-to-FRU index, service information, error codes, error messages, and configuration information for the IBM xSeries 200. Important: This manual is intended for trained servicers who are familiar with IBM PC Server products. Important safety information Be sure to read all caution and danger statements in this book before performing any of the instructions. Leia todas as instruções de cuidado e perigo antes de executar qua
Streszczenie treści zawartej na stronie nr. 6
Lesen Sie alle Sicherheitshinweise, bevor Sie eine Anweisung ausführen. Accertarsi di leggere tutti gli avvisi di attenzione e di pericolo prima di effettuare qualsiasi operazione. Lea atentamente todas las declaraciones de precaución y peligro ante de llevar a cabo cualquier operación. Online support Use the World Wide Web (WWW) to download Diagnostic, BIOS Flash, Device Driver files and documents. The Web address is: http://www.ibm.com/pc/support iv Hardware Maintenance Manual: xSeries
Streszczenie treści zawartej na stronie nr. 7
Contents System board internal cable connectors . . . . . . . 36 About this manual . . . . . . . . . . . . . . . . . . . iii System board external connectors . . . . . . . . . . . . 37 Important safety information . . . . . . . . . . . . . . . . . . . . . . iii System board switches and jumpers . . . . . . . . . . 38 Online support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Workin
Streszczenie treści zawartej na stronie nr. 8
ServeRAID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 FRU information (service only). . . . . . . . . 73 Undetermined problems . . . . . . . . . . . . . . . . . . . . . . . . 100 Hard disk drive cage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Rear fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Parts listing . . . . .
Streszczenie treści zawartej na stronie nr. 9
General checkout The server diagnostic programs are stored in upgradable read-only memory (ROM) on the system board. These programs are the primary method of testing the major components of the server: The system board, Ethernet controller, video controller, RAM, keyboard, mouse (pointing device), diskette drive, serial ports, hard drives, and parallel port. You can also use them to test some external devices. See “Diagnostic programs and error messages” on page 10. Also, if you cannot
Streszczenie treści zawartej na stronie nr. 10
YES. Schedule maintenance with the customer. Shut down all systems related to the cluster. Run storage test. NO. Go to step 2. 2. IF THE SYSTEM IS NOT PART OF A CLUSTER: Power-off the computer and all external devices. Check all cables and power cords. Set all display controls to the middle position. Power-on all external devices. Power-on the computer. Record any POST error messages displayed on the screen. If an error is displayed, look up the first error in the “POST err
Streszczenie treści zawartej na stronie nr. 11
General information The IBM® xSeries 200 server delivers great value for general server applications. It is ideally suited for networking environments that require superior microprocessor performance, efficient memory management, flexibility, and large amounts of reliable data storage. The server serial number and model number are located on labels on the rear and front of the server. With access to the World Wide Web, up-to-date information about the server model and other IBM server p
Streszczenie treści zawartej na stronie nr. 12
Table 1. Features and Specifications. Microprocessor: Supports one Power supply: Environment: microprocessor (depending on your Air temperature: One 330 watt (90-240 V ac) model) — Server on: 10° to 35° C (50.0° ® ® Intel Pentium III with 256 KB Video: to 95.0° F). Altitude: 0 to 914 Level-2 cache and MMX™ m (2998.7 ft.) S3 Savage 4 AGP video adapter (MMX2) technology — Server on: 10° to 32° C (50.0° Compatible with SVGA and or to 89.6° F). Altitude: 914 m VGA ® ® (2998.
Streszczenie treści zawartej na stronie nr. 13
Large system memory The memory bus in the server supports up to 1.5 gigabytes (GB) of system memory. The memory controller provides error code correction (ECC) support for up to three industry-standard PC133, 3.3 V, 168-pin, 133 megahertz (MHz), unregistered, synchronous dynamic random access memory (SDRAM) dual in- line memory modules (DIMMs). Systems-management capabilities See the documentation provided with the systems-management software for more information. Integrated network
Streszczenie treści zawartej na stronie nr. 14
— Auto-restart initial program load (IPL) power supply — Automatic error retry or recovery — Automatic server restart — Automatic restart after power failure — Built-in, menu-driven configuration programs — Built-in, menu-driven SCSI configuration programs (some models) — Built-in, menu-driven setup programs — Failover Ethernet support — Menu-driven diagnostic programs on CD-ROM — Monitoring support for temperature, voltage, and fan speed — Server management — ServeRAID™ adapter support — Stan
Streszczenie treści zawartej na stronie nr. 15
Server controls and indicators Ethernet speed 100 Mbps CD eject button CD-ROM drive activity light Diskette eject button Diskette drive activity light Hard disk drive activity light Power-on light Power control button Ethernet transmit/ receive activity CD-ROM drive activity light: When this light is on, it indicates that the CD-ROM drive is in use. Diskette eject button: Push this button to install or remove a diskette from the drive. Diskette drive activity light: When this light is on, it
Streszczenie treści zawartej na stronie nr. 16
CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. Turning off the server You can turn off the server in any of the following ways: You can press the power control button on the front of the server. This starts an or
Streszczenie treści zawartej na stronie nr. 17
Diagnostics This section provides basic troubleshooting information to help you resolve some common problems that might occur with the server. If you cannot locate and correct the problem using the information in this section, refer to “Symptom-to-FRU index” on page 85 for more information. Diagnostic tools overview The following tools are available to help you identify and resolve hardware-related problems: POST beep codes The power-on self-test (POST) generates beep codes and messages to
Streszczenie treści zawartej na stronie nr. 18
Repeating long beeps Indicates that a memory error has occurred. Ensure that all DIMMs are correctly installed. One long beep and two short beeps Indicates that a video error has occurred and the BIOS cannot initialize the video screen to display any additional information. Ensure that the video adapter is correctly installed. For a list of POST errors, see “POST error codes” on page 94. Small computer system interface messages (some models) The following table lists actions to take if you
Streszczenie treści zawartej na stronie nr. 19
Sometimes the first error to occur causes additional errors. In this case, the server displays more than one error message. Always follow the suggested action instructions for the first error message that appears. The following sections contain the error codes that might appear in the detailed test log and summary log when running the diagnostic programs. The error code format is as follows: fff-ttt-iii-date-cc-text message where: fff is the three-digit function code that indicates
Streszczenie treści zawartej na stronie nr. 20
Starting the diagnostic programs The IBM Enhanced Diagnostics programs will isolate your server hardware from software that you have installed on your hard disk drive. The programs run independently of the operating system, and must be run either from the CD or diskette. This method of testing is generally used when other methods are not accessible or have not been successful in isolating a problem suspected to be hardware related. An IBM Enhanced Diagnostics CD comes with the server. Yo
