Streszczenie treści zawartej na stronie nr. 1
4-Port PoweredUSB 2.0 Hub
Operations Guide
with External Power Supply
Part #011006
CyberData Corporation
2555 Garden Road
Monterey, CA 93940
(831) 373-2601
930232A
Streszczenie treści zawartej na stronie nr. 2
4-Port PoweredUSB 2.0 Hub Operations Guide 930232A Part # 011006 COPYRIGHT NOTICE: © 2007, CyberData Corporation, ALL RIGHTS RESERVED. This manual and related materials are the copyrighted property of CyberData Corporation. No part of this manual or related materials may be reproduced or transmitted, in any form or by any means (except for internal use by licensed customers), without prior express written permission of CyberData Corporation. This manual, and the products, software, firmwa
Streszczenie treści zawartej na stronie nr. 3
iii Contents Chapter 1 Product Overview 1 Chapter 2 Installing and Using the 4-Port PoweredUSB Hub 3 2.1 Product Components List .....................................................................................................................3 2.2 Product Compatibility ...........................................................................................................................4 2.3 Installation ....................................................................................
Streszczenie treści zawartej na stronie nr. 4
iv CyberData Corporation 930232A Operations Guide
Streszczenie treści zawartej na stronie nr. 5
1 1 Product Overview The SiP VoIP and PoE Speaker provides a simple, affordable way to add up to four PoweredUSB ports to your PC. These additional ports are controlled by the PC’s Standby and Wake commands. This add-on Hub makes it easy to connect the PC to devices that require more than the 500mA of +5 volts supplied with the standard USB interface. Figure 1-1. CyberData 4-Port PoweredUSB 2.0 Hub Product features ● 4 PoweredUSB ports ● Four +12 volt up to 1.5A each ● Short circuit and over
Streszczenie treści zawartej na stronie nr. 6
2 Product Overview CyberData Corporation 930232A Operations Guide
Streszczenie treści zawartej na stronie nr. 7
3 2 Installing and Using the 4-Port PoweredUSB Hub This chapter provides the instructions, illustrations, and background information you need to install, and begin working with the SiP VoIP and PoE Speaker. Figure 2-2. CyberData 4-Port PoweredUSB 2.0 Hub 2.1 Product Components List The 4-Port PoweredUSB 2.0 Hub package includes these parts: ● (1) SiP VoIP and PoE Speaker ● Power Supply, 24VDC, Desk-top, 4-Pin Hosiden style plug ● (1) Accessory Kit � (1) Short USB 2.0 Hi-Speed host cable � (1
Streszczenie treści zawartej na stronie nr. 8
4 Installing and Using the 4-Port PoweredUSB Hub Product Compatibility Figure 2-3. CyberData 4-Port PoweredUSB 2.0 Hub—Front View Port Power LED +12V PoweredUSB Ports Hub Power LED Link LED Port 1 Status LED Lower portion of PoweredUSB Port connectors are Standard USB 2.0 Hi-Speed “A” ports Figure 2-4. CyberData 4-Port PoweredUSB 2.0 Hub—Back View +24V for +24V for USB Host Strain up to 2.5 up to 6.5 Connector Relief Amp load Amp load (Type B) 2.2 Product Compatibility The SiP VoIP and PoE Sp
Streszczenie treści zawartej na stronie nr. 9
Installing and Using the 4-Port PoweredUSB Hub 5 Installation 2.3 Installation The SiP VoIP and PoE Speaker is a tabletop unit with mounting feet that sit on a flat surface. 2.4 Connections This following topics provide illustrations and information on connecting the SiP VoIP and PoE Speaker to power supplies, the host, and peripheral devices. 2.4.1 Power Supply The PoweredUSB specification requires supplying +12V at 1.5A to each voltage designated port. These requirements are met only if the
Streszczenie treści zawartej na stronie nr. 10
6 Installing and Using the 4-Port PoweredUSB Hub Connections 2.4.2 Host Connector The connection to the host computer is achieved via a standard USB 2.0 certified Hi-Speed “A” to “B” cable that is included in the Accessory Kit, or with any equivalent USB 2.0 certified Hi-Speed cable. Refer to the Section 2.1, "Product Components List" for information about the Accessory Kit. Figure 2-6. Host connector with strain relief 2.4.3 PoweredUSB Connections The PoweredUSB connections are standard USB
Streszczenie treści zawartej na stronie nr. 11
Installing and Using the 4-Port PoweredUSB Hub 7 Connections 2.4.4 Connector Color Keys The PoweredUSB connectors are color keyed so that only the correct voltage cables can be installed. Figure 2-7. Color-Coding for Connectors Teal Red 12 Volt Keyed 12 Volt Keyed 1.5A each 1.5A each Ports 1,2, and 3 Ports 1,2, and 3 Figure 2-8. USB PoweredUSB Socket Connector Pin Assignments PIN OUT Pin Signal Description 1 Vbus USB standard “A” 2 D- USB standard “A” 3 D+ USB standard “A” 4 Ground USB stand
Streszczenie treści zawartej na stronie nr. 12
8 Installing and Using the 4-Port PoweredUSB Hub Connections Figure 2-9. Top view of Hub PoweredUSB cable routing +12V PoweredUSB Connectors CyberData 4-Port PoweredUSB Hub CyberData Corporation 930232A Operations Guide
Streszczenie treści zawartej na stronie nr. 13
Installing and Using the 4-Port PoweredUSB Hub 9 Connections 2.4.6 Peripheral Cable Connection Options Figures 10 through 16 provide examples of peripheral cable combinations and connection options for the SiP VoIP and PoE Speaker. The following table provides details about the CyberData PoweredUSB Cables displayed in these figures. PoweredUSB Custom cables of different lengths and colors can be purchased from CyberData as follows: cable sources ● Via email: sales@cyberdata.net ● Via phone: S
Streszczenie treści zawartej na stronie nr. 14
10 Installing and Using the 4-Port PoweredUSB Hub Operation Figure 2-11. Cables; +12V PoweredUSB to +12V Power Jack and RS-232 to RS-232 Figure 2-12. RS232 to USB Converter “Y” Cable +12V (PC Enumerates this device as an RS-232 COM port) 2.5 Operation The SiP VoIP and PoE Speaker is a standard USB Hub that complies with the USB 2.0 specification, and adds PoweredUSB ports. When connected to a Host, it is enumerated as a Generic USB Hub. This Hub also meets the PoweredUSB .08g specification.
Streszczenie treści zawartej na stronie nr. 15
Installing and Using the 4-Port PoweredUSB Hub 11 Operation When running on operating systems such as Windows XP with no devices attached (an empty Hub), the operating system turns the Hub off. The operating system does not detect non-compliant peripherals when they are hot-plugged into an empty Hub. Consequently PoweredUSB power is not supplied to the peripheral. In this case, you can restore correct operation as follows. 1. Unplug the Host side connection for five seconds, and then plug i
Streszczenie treści zawartej na stronie nr. 16
12 Installing and Using the 4-Port PoweredUSB Hub Port Electrical Specifications 2.6 Port Electrical Specifications The SiP VoIP and PoE Speaker adheres to the USB 2.0 electrical specifications as follows: Standard USB Each lower portion of the PoweredUSB port provides +5V @ 500mA. If more than 500mA are drawn lower A supply from a port, that port goes into USB over current, the +5 volts is turned off, and the condition is reported to the host according to USB 2.0 specifications. PoweredUSB T
Streszczenie treści zawartej na stronie nr. 17
13 Appendix A: Regulatory and Safety Information Regulatory FCC Statement: This equipment has been tested and found to comply with the limits for a Class A standards digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in
Streszczenie treści zawartej na stronie nr. 18
14 CyberData Corporation 930232A Operations Guide
Streszczenie treści zawartej na stronie nr. 19
15 Appendix B: Setting up the Hub on Windows XP For connecting the SiP VoIP and PoE Speaker to a PC running the Windows XP operating system, keep in mind: 1. Microsoft XP Service Pack 1 or higher must be installed. 2. When connecting the Hub for the first time, it is important to perform the enumeration correctly. A Microsoft XP Service Pack issue does not enumerate and recognize a Hub when no devices are attached to it. To correctly enumerate the SiP VoIP and PoE Speaker, attach a peripher
Streszczenie treści zawartej na stronie nr. 20
16 CyberData Corporation 930232A Operations Guide
