Instrukcja obsługi Field Controls UV-Aire Air Purifying System UV-500C

Streszczenie treści zawartej na stronie nr. 1

UV-AIRE™ AIR PURIFYING SYSTEM
Model: UV-500C
*For best results, operate
the UV-500 continuously
24 hours a day.
ITEMS INCLUDED IN SYSTEM:
1-UV-Aire ™ UV-500C unit
1-Ultra Violet Lamp Individually Boxed
1-Instruction Sheet
4-10” x 10” x 1” Filters
1-Bagged Parts: containing lamp
connector, alcohol swab and
access door screw
The high intensity ultraviolet light attacks airborne mold, bacteria, and viruses. The high efficiency filter traps
allergens, dust, and pollen. The carbon f

Streszczenie treści zawartej na stronie nr. 2

I. INDICATION FOR USE This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for use in the mitigation, treatment, or prevention of any disease or condition. II. GENERAL INFORMATION Width Height Depth Lamp Intensity Recommended Model Volts Amps Watts Weight Hz at 1 meter Max Sq. Feet (Inches) (Inches) (Inches) 2 UV-500C 120 .4 60 38 15 μW/cm 500 11 Lbs 12 15 13 FEATURES 1. The UV-500C is equipped with a three speed control

Streszczenie treści zawartej na stronie nr. 3

10. Slide the filter drawer out of the base. Remove one the four filters from its plastic bag and place it in the drawer with arrow/carbon side up. (See Figure 6) 11. Slide the filter drawer with filter back into the base unit. Press firmly until drawer catches. NOTE: The positive catch eliminates vibration and ensures proper function of the filter. 12. Unwind the power cord from underneath the unit and insert plug into any standard 120- Figure 6 volt outlet. 13. Turn the speed control k

Streszczenie treści zawartej na stronie nr. 4

3. Disconnect the lamp connection, then rotate lamp-mounting knob counter-clockwise and pull the lamp out of the unit. (See Figure 10 & 11) 4. Remove lamp carefully, by un-plugging the lamp from the lamp-mounting knob. (See Figure 12) NOTE: When replacing the lamp, always wipe off lamp with the supplied alcohol wipe before installing. Figure 10 5. Plug the new lamp onto the lamp-mounting knob. (See Figure 12) 6. Guide the other end of the lamp through the hole in the UV chamber. (See F