Streszczenie treści zawartej na stronie nr. 1
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 1 Friday, September 25, 2009 6:51 AM
3.5" SATA Hard Drive Enclosure
Kit
RF-AHD35
User Guide
Streszczenie treści zawartej na stronie nr. 2
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 2 Friday, September 25, 2009 6:51 AM Rocketfish RF-AHD35 3.5" Hard Drive Enclosure Kit Contents Introduction ................................................................. 2 Safety information ..................................................... 3 Features ......................................................................... 3 Using the hard drive enclosure ............................. 7 Appendix....................................................
Streszczenie treści zawartej na stronie nr. 3
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 3 Friday, September 25, 2009 6:51 AM Safety information • Always read these safety instructions and this User Guide carefully. Keep this User Guide for future reference. • Take precautions to avoid static electricity discharge or short circuits when connecting this enclosure to your computer. • Do not use this enclosure close to water, rain, or high humidity. • Do not use or store this enclosure in damp locations. Liquid entering this enclosure may cau
Streszczenie treści zawartej na stronie nr. 4
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 4 Friday, September 25, 2009 6:51 AM • Rapid heat dissipation. • Can stand or lie down while operating. • Supports Plug-and-Play and is hot swappable. • Has one power on with backup active indicator and one card reader active indicator. Package contents • 3.5" SATA hard drive enclosure • A-B type USB cable •eSATA cable •Two utility CDs • Quick Setup Guide • Desktop dual-voltage power adapter with power cord • An extra swappable cover plate •Stand • Accesso
Streszczenie treści zawartej na stronie nr. 5
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 5 Friday, September 25, 2009 6:51 AM Identifying components Front BACKUP button Card reader LED CF/MD slot SD/MMC/MS /MS PRO/xD slot USB ports RF-AHD35 5
Streszczenie treści zawartej na stronie nr. 6
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 6 Friday, September 25, 2009 6:51 AM Back POWER ON/OFF button eSATA port USB port DC power jack Status indicators LED indicators LED Description Backup button Solid The hard drive is turned on. Flashing Data is being transmitted between your computer and the hard drive. Off The hard drive is turned off. Card reader Solid A memory card is in the reader. Flashing Data is being transmitted between your computer and the card reader. Off The memory card reade
Streszczenie treści zawartej na stronie nr. 7
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 7 Friday, September 25, 2009 6:51 AM Using the hard drive enclosure Installing your hard drive in the enclosure Read these safety precautions before you install your hard drive in the enclosure: • Use only the accessories provided in the accessory package. • Always unplug the AC power adapter before installing the hard drive. • Do not use a power supply with a different voltage rating. • Make sure that you first touch an unpainted, grounded metal objec
Streszczenie treści zawartej na stronie nr. 8
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 8 Friday, September 25, 2009 6:51 AM 2 Secure one metal brace to each side of the drive using two screws. 3 Place four rubber pads onto each of the two metal braces on the hard drive as shown. 4 Slide the drive into the enclosure, firmly connect the SATA connector, then secure the drive to the enclosure by tightening the four screws through the rubber pads. 8
Streszczenie treści zawartej na stronie nr. 9
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 9 Friday, September 25, 2009 6:51 AM 5 Put the front cover plate back on the enclosure, then secure it with the four screws you previously removed. 6 Place four rubber feet on the back of the case, then put four rubber feet on the stand. RF-AHD35 9
Streszczenie treści zawartej na stronie nr. 10
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 10 Friday, September 25, 2009 6:51 AM Connecting the enclosure to your computer Before connecting your external storage enclosure: • Confirm that your system supports SATA. If your system does not support SATA, please install an eSATA host card. • Confirm that the eSATA port on your system is working properly. If not, please refer to your computer manufacturer for assistance in getting the eSATA port to work properly. • To enable auto mount for SATA, yo
Streszczenie treści zawartej na stronie nr. 11
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 11 Friday, September 25, 2009 6:51 AM Note: Some motherboards do not support eSATA hot-plug and play function. If your motherboard does not, follow these steps to set up your RF-AHD35: 1. Shut down your computer. 2. Turn on your RF-AHD35, then connect it to your computer. 3. Power on your computer. Notes: Windows XP/2000/Vista/7 No drivers are necessary when using Windows XP/2000/Vista/7. If the hard drive does not appear in My Computer, be sure to part
Streszczenie treści zawartej na stronie nr. 12
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 12 Friday, September 25, 2009 6:51 AM Note: Most USB devices require that USB device software drivers be installed before connecting them to a computer. When installing a USB device, always follow the USB peripheral’s installation instructions provided by the manufacturer. Using your memory card reader The enclosure provides two memory card slots. Memory card slots Memory cards accepted SD/MMC/MS/MS-PRO/xD • Secure Digital card (SD) • Multi Media card (
Streszczenie treści zawartej na stronie nr. 13
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 13 Friday, September 25, 2009 6:51 AM 5 Remove the memory card. Caution: Do not remove memory cards while the card reader LED is flashing or blinking. Formatting a memory card To format a memory card: 1 Click Start, and then click My Computer. 2 Under Removable Storage, right-click the memory card icon representing the card type inserted, then click Format. 3 Type a label name into the label field, if you want to see the name of your memory card appear
Streszczenie treści zawartej na stronie nr. 14
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 14 Friday, September 25, 2009 6:51 AM Installing the software The installation CD includes backup software to enable you to back up your files. Note: This Roxio BackOnTrack software runs only on Windows7, WindowsVista, and Windows XP computers using USB. Important: Before installing the backup software, make sure that your Windows operating system has been updated to the latest service pack. To make sure you have the latest service pack, run Windows
Streszczenie treści zawartej na stronie nr. 15
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 15 Friday, September 25, 2009 6:51 AM 3 Click Install Roxio® BackOnTrack™ 3 LE. The Welcome screen opens. RF-AHD35 15
Streszczenie treści zawartej na stronie nr. 16
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 16 Friday, September 25, 2009 6:51 AM 4 Click NEXT. The Roxio End-User License Agreement screen opens. 16
Streszczenie treści zawartej na stronie nr. 17
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 17 Friday, September 25, 2009 6:51 AM 5 Read the license agreement, then click NEXT to agree. The Customer Information screen opens. RF-AHD35 17
Streszczenie treści zawartej na stronie nr. 18
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 18 Friday, September 25, 2009 6:51 AM 6 Enter your information, then click NEXT. The Choose Setup Type screen opens. 18
Streszczenie treści zawartej na stronie nr. 19
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 19 Friday, September 25, 2009 6:51 AM 7 Choose the setup type, then click Install to start installation. It may take several minutes to install the software. RF-AHD35 19
Streszczenie treści zawartej na stronie nr. 20
RF-AHD35_09-0774_MAN_ENG_V3.fm Page 20 Friday, September 25, 2009 6:51 AM 8 When installation is complete, the Setup Wizard Completed screen opens. 9 Click FINISH to complete the installation. 20
