Instrukcja obsługi Agilent Technologies G5404B

Streszczenie treści zawartej na stronie nr. 1

G5404B Microplate Labeler Media Loading Guide
This guide describes how to load the labels and ribbon Slide the new ribbon roll onto the hub until it is
in the printer on the G5404B Microplate Labeler. flush against the printer. Ensure the ribbon feeds
clockwise with the coating facing downward when
being unwound.
Getting help
b While firmly holding the hub, turn the green knob
• User documentation: You can search the online
counterclockwise to expand the hub and
knowledge base or download

Streszczenie treści zawartej na stronie nr. 2

Step 1. Installing the label roll on the roll retainer 3 Guide the label strip below the axis bar and through the label sensor (7) so that the label strip exits the print unit between the printhead and the print roller (6). 4 Push the guide ring (8) on the axis bar against the 1 outer edge of the label strip. Step 3. Securing the label strip to the rewinder 3 4 2 12 To install the label roll on the roll retainer: 1 Turn the green locking ring (1) counterclockwise to 9 the unlocked ( ) posit