Instrukcja obsługi Woodstock International, Inc.D2056

Streszczenie treści zawartej na stronie nr. 1

Model D2056
Deluxe Tool Table
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz
The Model D2056 Shop Fox Deluxe Tool Table is designed to give you a solid, stable work surface. This
table has a 700 lb. capacity and yet it is light enough to be portable. The flared steel legs and cross
bracing top and bottom provide a solid foundation for the 13" x 23" x 1" butcher block style work surface.
Adjustable rubber feet assure a firm grip

Streszczenie treści zawartej na stronie nr. 2

3. Place the table top bottom side up on a work bench or the floor. Lay the leg and brace assembly upside down on the table top bottom. Move the assembly around until it is evenly spaced on the surface. Mark the hole locations of the four holes in each corner bracket, and the two holes in each upper brace. 1 4. Remove the leg and brace assembly. Use a ⁄8'' drill bit in your drill to drill holes at each marked 3 point to a depth of ⁄4". Be careful to not drill all the way through the table to