Streszczenie treści zawartej na stronie nr. 1
MODEL W1752
MINI WOOD LATHE
OWNER'S MANUAL
(FOR MODELS MANUFACTURED SINCE 1/07)
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
COPYRIGHT © JANUARY, 2007 BY WOODSTOCK INTERNATIONAL, INC. REVISED AUGUST, 2010 (TR)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#8952BL Printed in China
Streszczenie treści zawartej na stronie nr. 2
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installa- tion in a safe environment, personnel training and usag
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION SAFETY ELECTRICAL SET UP OPERATIONS MAINTENANCE SERVICE PARTS Contents INTRODUCTION ...................................... 2 ACCESSORIES ....................................... 25 Woodstock Technical Support ..................2 Lathe Accessories .............................. 25 SAFETY ................................................ 6 MAINTENANCE ..................................... 26 Standard Safety Instructions ...................6 General ......................................
Streszczenie treści zawartej na stronie nr. 4
W1752 Owner's Manual (Mfg. 1/07+) INTRODUCTION Woodstock Technical Support ® Your new SHOP FOX Mini Wood Lathe has been specially designed to provide many years of trouble- free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of
Streszczenie treści zawartej na stronie nr. 5
INTRODUCTION W1752 Owner's Manual (Mfg. 1/07+) MACHINE SPECIFICATIONS Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz MOdEl W1752 MINI WOOd lATHE Motor Type ................................................................................. Capacitor Start 1 Horsepower .................................................................................... /2 HP Voltage ...............................................................................
Streszczenie treści zawartej na stronie nr. 6
W1752 Owner's Manual (Mfg. 1/07+) Main Specifications Swing Over Bed ................................................................................... 10" 1 Swing Over Tool Rest ........................................................................... 7 /2" Distance Between Centers ...................................................................... 15" 51 7 Spindle Size .............................................................................7 /64" x 1 /8" Spindle TPI ........
Streszczenie treści zawartej na stronie nr. 7
INTRODUCTION W1752 Owner's Manual (Mfg. 1/07+) Controls and Features L K E G J C D M N F B H I A O P Q T S R Figure 1. W1752 controls and features. A. Belt Tension Lock Knob B. Belt Cover Lock Handle C. Belt Cover D. Headstock E. Faceplate F. Tool Rest Base G. Tool Rest H. Tool Rest Lock Handle I. Tool Rest Release Lever J. Tailstock Release Lever K. Live Center L. Quill Lock Handle M. Quill Handwheel N. Tailstock O. ON/OFF Switch P. Safety Key Q. Lathe Bed R. Motor S. Belt Tension Lever T. Foo
Streszczenie treści zawartej na stronie nr. 8
W1752 Owner's Manual (Mfg. 1/07+) SAFETY READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. This symbol is used to al
Streszczenie treści zawartej na stronie nr. 9
SAFETY W1752 Owner's Manual (Mfg. 1/07+) 10. NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power off and allow all moving parts to come to a complete stop before leaving machine unattended. 11. DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist. 12. KEEP WORK AREA CLEAN AND WELL LIT. Clutter and dark shadows may cause accidents. 13. USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE AMPERAGE. Undersized cords over-
Streszczenie treści zawartej na stronie nr. 10
W1752 Owner's Manual (Mfg. 1/07+) Additional Safety for Wood Lathes READ and understand this USE this and other machinery with caution entire instruction manual and respect. Always consider safety first, before using this machine. as it applies to your individual working Serious personal injury conditions. No list of safety guidelines can may occur if safety and be complete—every shop environment is operational information is different. Failure to follow guidelines could not understo
Streszczenie treści zawartej na stronie nr. 11
SAFETY W1752 Owner's Manual (Mfg. 1/07+) 13. FACEPLATE TURNING. When faceplate turning, use lathe chisels on the downward spinning side of the workpiece only. 14. SANDING/POLISHING. Remove the tool rest when performing sanding or polishing operations on the rotating spindle. 15. MATERIAL REMOVAL RATE. Removing too much material at once may cause workpiece to fly out of the lathe. 16. REDUCING WORKPIECE VIBRATION. If the workpiece vibrates, immediately turn the lathe OFF. Check to make sure t
Streszczenie treści zawartej na stronie nr. 12
W1752 Owner's Manual (Mfg. 1/07+) ELECTRICAL 110V Operation The Model W1752 is wired for 110V operation. Always con- nect this machine to a dedicated circuit (wire, breaker, plug, receptacle) with a verified ground, using the recom- mended circuit size and plugs/receptacles listed at the bottom of this page. We recommend connecting this machine to a dedicated circuit with a verified ground, using the circuit size given below. Never replace a circuit breaker with one of higher amperage witho
Streszczenie treści zawartej na stronie nr. 13
SET UP W1752 Owner's Manual (Mfg. 1/07+) SET UP If any parts are missing, examine the pack- Unpacking aging for the missing parts. For any missing parts, find the part number in the back ® The SHOP FOX Model W1752 has been carefully pack- of this manual and contact Woodstock aged for safe transporting. If you notice the machine has International, Inc. at (360) 734-3482 or at been damaged, please contact your authorized SHOP tech-support@shopfox.biz ® FOX dealer immediately. Inventory The f
Streszczenie treści zawartej na stronie nr. 14
W1752 Owner's Manual (Mfg. 1/07+) Machine Placement Cleaning Machine • Floor Load: Some workbenches may require The bed and other unpainted parts of your lathe additional reinforcement to support both are coated with a waxy grease that protects the machine and the operator. Make sure them from corrosion during shipment. Clean this you take these precautions. grease off with a solvent cleaner or citrus-based degreaser. DO NOT use chlorine-based solvents • Working Clearances: Consider exis
Streszczenie treści zawartej na stronie nr. 15
SET UP W1752 Owner's Manual (Mfg. 1/07+) Assembly To install the tool rest, do these steps: Lock Handles 1. Turn the release lever on the tool rest base so it does not interfere with assembly. Release 2. Thread the tool rest lock handles into the tool rest Lever base (Figure 4) until the threaded ends of the handles are flush with the inside of the shaft. 3. Insert the tool rest into the shaft and turn the handles to lock it as shown in Figure 5. Tool Rest Base 4. Install the optional be
Streszczenie treści zawartej na stronie nr. 16
W1752 Owner's Manual (Mfg. 1/07+) Test Run Complete this process once you have familiarized yourself with all instructions in this manual. The test run consists of verifying the following: 1) The motor powers up and runs correctly, and 2) the safety paddle switch works correctly. To test run the mini wood lathe, do these steps: Projectiles thrown from the machine could cause serious eye injury. Wear 1. Read the entire instruction manual first! safety glasses during assembly and operation.
Streszczenie treści zawartej na stronie nr. 17
OPERATIONS W1752 Owner's Manual (Mfg. 1/07+) OPERATIONS General The Model W1752 will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incor- rectly. The instructions in this section are written with the under- standing that the operator has the necessary knowledge and skills to operate this machine. If at any time you are experiencing difficulties performing any operation, READ and understand this ent
Streszczenie treści zawartej na stronie nr. 18
W1752 Owner's Manual (Mfg. 1/07+) Changing Speeds To change speeds, the belt in the headstock must be repositioned. A chart on the pulley cover shows the belt positions needed to make the lathe run at the desired speed. To change speeds, do these steps: Lock Handle Belt Cover 1. Loosen the lock handle, remove the belt cover, and Access open the access plate (Figure 6). Plate 2. Loosen the belt tension lock knob, and move the belt tension lever up to reduce tension on the belt. Belt Tens
Streszczenie treści zawartej na stronie nr. 19
OPERATIONS W1752 Owner's Manual (Mfg. 1/07+) Adjusting Tool Rest The tool rest is equipped with a cam-action clamping system to secure it to the lathe bed. When the lever is engaged, a locking plate lifts up and secures the tool rest Lock Tool Rest base to the bed. Handle Base To position the tool rest base along the bed, do these steps: 1. Loosen the release lever and slide the tool rest base Lock along the bed (Figure 9). Handle 2. Re-engage the release lever to lock the tool rest b
Streszczenie treści zawartej na stronie nr. 20
W1752 Owner's Manual (Mfg. 1/07+) To remove the spur center with the knock-out bar, do these steps: 1. UNPLUG LATHE FROM POWER! 2. Hold a clean rag under the spindle or wear a glove to catch the center when you remove it. 3. Insert the knock-out bar through the outboard end of the spindle and tap the center (as shown in Figure 11). Catch the center as it falls out. Installing/Removing Figure 11. Removing spur center using knock out bar. Live Center To install the live center, do these ste
