Instrukcja obsługi Grindmaster LCD2-1

Streszczenie treści zawartej na stronie nr. 1

LIQUID COFFEE DISPENSERS
OPERATIONS MANUAL
LCD2-1 & LCD2-3
INSTALLATION
WATER INLET CONNECTION
The following is required for water hook-up:
• A quick disconnect water connection or enough coiled tubing so the machine can be moved for cleaning underneath. (required for NSF
approved water hook-up)
• A 1/4" male flare adapter is provided (packed inside the drain tray) to be attached by the installer to the back of the machine for hook-up
to water supply.
• Installation to a water filter system

Streszczenie treści zawartej na stronie nr. 2

Streszczenie treści zawartej na stronie nr. 3

LCD2-1 & LCD2-3 BAG-IN-BOX HOOK-UP (cont.) • Flip water switch back to “ON” position. • Close front door and ensure that both water and product are dispensed simultaneously HOW TO DISPENSE A CUP OF COFFEE Warning: Do not use cups over 6 3/4” (15.2 cm) tall with this machine. Use of cups over this height could result in severe burns and injury. On models with manual dispense switches: • Place a cup under the selected drink dispense nozzle. • Push and hold dispense switch until cup is full and th

Streszczenie treści zawartej na stronie nr. 4

LCD2-1 & LCD2-3 Service and Cleaning Daily Cleaning Instructions for the LCD Coffee Dispensers • Wipe down all stainless steel surfaces of the dispense spout, bag-in-box cabinetry and drip tray areas with a clean soft cloth using a mixture of one oz. (28 g) Ivory liquid detergent or equivalent to one gallon (3.8 litre) of fresh water. • Follow by wiping down all stainless steel surfaces of the dispense spout and cabinetry with a clean soft cloth moistened with fresh water and allow to air dry

Streszczenie treści zawartej na stronie nr. 5

LCD2-1 & LCD2-3 The following procedures must be performed by a qualified service technician. TROUBLESHOOTING GUIDE Problem Possible Cause Solution • Ensure door is latched closed. Reset No hot water from dispense head • Door is open (An interlock switch disables power to machine to ensure fill circuit the dispense and fill circuits when the door watchdog timer is reset is open) • Consult factory for assistance • Faulty thermistor • Check for open heater and replace if • Faulty water tank hea

Streszczenie treści zawartej na stronie nr. 6

LCD2-1 & LCD2-3 Models LCD2-1 & LCD2-3 Parts List 62264 62265 71147 61128 61805 62274 61108 68133 62297 61822 62251 61994 61191 62293 62338 61131 Controller 61800-02 - Auto/Remote/3-Portion 61800-05 - Manual/Remote 62354 - LCD 2-3- -M models * 10 Minute dispense max. 61999 62249 Part # DESCRIPTION PROBE, WATER LEVEL 61108 61128 PROBE, THERMISTOR RELAY, HEATER 61131 SWITCH, VACUUM 14” BDR 61191 CONTROLLER, AUTO/REMOTE/3-PORTION 61800-02 TUBING, 3/16 ID PUMP TUBING 61822 61994 PUMP, 3 ROLLER CAP,

Streszczenie treści zawartej na stronie nr. 7

Streszczenie treści zawartej na stronie nr. 8

Grindmaster® Coffee Grinders and Brewers � PrecisionBrew™ Brewing Systems � Espressimo® Espresso Machines Crathco® Hot Beverage Dispensers � Crathco® Cold and Frozen Beverage Dispensers � AMW Coffee and Tea Systems Tel (502) 425-4776 � Fax (502) 425-4664 � 1-800-695-4500 (USA & Canada only) P.O. Box 35020 � Louisville, KY 40232 � USA © Grindmaster Corporation, 2006 0307 Form # AM-330-04 www.grindmaster.com � email: info@grindmaster.com PRINTED IN USA Part # 62280