Streszczenie treści zawartej na stronie nr. 1
OPERATOR'S MANUAL
®
HAMMER/PULSE DRILL
R5010
Your new drill has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a Ridgid product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Introduction ............................................................................................................................................................... 2 General Safety Rules ............................................................................................................................................ 3-4 Specific Safety Rules......................................................................................................
Streszczenie treści zawartej na stronie nr. 3
GENERAL SAFETY RULES Dress properly. Do not wear loose clothing or jew- WARNING: elry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jew- Read and understand all instructions. Failure to elry, or long hair can be caught in moving parts. follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Avoid accidental starting. Be sure switch is off be- fore plugging in. Carrying tools with your finger on
Streszczenie treści zawartej na stronie nr. 4
GENERAL SAFETY RULES Service When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance Tool service must be performed only by qualified section of this manual. Use of unauthorized parts or repair personnel. Service or maintenance performed failure to follow Maintenance Instructions may create by unqualified personnel could result in a risk of injury. a risk of electric shock or injury. SPECIFIC SAFETY RULES Hold tool by insulated gripping sur
Streszczenie treści zawartej na stronie nr. 5
SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current n No Load Speed Rotational speed, at no load 0 Class II Construction Double-insulated construction .../min Per Minu
Streszczenie treści zawartej na stronie nr. 6
SPECIFICATIONS Chuck Capacity ......................................................................................................................................... 1/2 in. (13 mm) Input ................................................................................................................... 120 Volts, 60 Hz, AC only, 9.0 amperes Switch.....................................................................................................................................................
Streszczenie treści zawartej na stronie nr. 7
UNPACKING Instructions Packing List Your drill has been shipped completely assembled. Hammer Drill with Auxiliary Handle Assembly Carefully remove the tool from the box. Depth Gauge Rod Make sure that all items listed in the packing list are Carrying Case included. Operator’s Manual Inspect the tool carefully to make sure no breakage or damage occurred during shipping. WARNING: Do not discard the packing material until you have If any parts are missing do not operate this tool carefully
Streszczenie treści zawartej na stronie nr. 8
FEATURES Before using this product, familiarize yourself with all AUXILIARY HANDLE ASSEMBLY operating features and safety requirements. However, do An auxiliary handle is installed on the hammer drill. For not let familiarity with the tool make you careless. ease of operation, you may use the handle with either the left hand or the right hand. WARNING: REVERSIBLE Exercise caution when using this tool. Careless This hammer drill allows you to reverse the bit rotation. You actions, for even a frac
Streszczenie treści zawartej na stronie nr. 9
OPERATION WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose par- ticles being thrown into your eyes, resulting in possible serious injury. SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. Release switch trigger to turn your drill OFF. LOCK-ON BUTTON See Figure 2. SWITCH TRIGGER Your drill is equipped with a lock-on feature, which is LOCK-ON convenient when continuous d
Streszczenie treści zawartej na stronie nr. 10
OPERATION VARIABLE SPEED See Figures 5 & 8. Your drill has a variable speed dial designed to allow operator control of speed and torque limits. The speed and torque of your drill can be increased by turning the dial on top of the drill. Avoid running your drill at low speeds for extended periods of time. Running at low speeds under constant usage may cause your drill to become overheated. If this occurs, cool your drill by running it without a load and at full speed. The following guidelines may
Streszczenie treści zawartej na stronie nr. 11
OPERATION ADJUSTING THE AUXILIARY HANDLE ASSEMBLY TO See Figure 7. TIGHTEN Follow these steps to adjust the auxiliary handle assembly. Loosen the auxiliary handle assembly by turning the knob counterclockwise. Rotate the auxiliary handle assembly to the desired location. Tighten the auxiliary handle assembly securely by turning the knob clockwise. ADJUSTING DRILLING MODE See Figure 8. TO LOOSEN To adjust for type of drilling, slide adjustment button on top of motor housing hammer mode or
Streszczenie treści zawartej na stronie nr. 12
OPERATION TO INSTALL BITS See Figures 10 and 11. Unplug your drill. RELEASE (UNLOCK) WARNING: CHUCK JAWS Failure to unplug your drill could result in acciden- tal starting causing serious injury. Open or close the chuck jaws to a point where the opening is slightly larger than the drill bit you intend to use. Also, raise the front of your drill slightly to keep CHUCK the drill bit from falling out of the chuck jaws. COLLAR Insert drill bit into chuck the full length of the jaws
Streszczenie treści zawartej na stronie nr. 13
OPERATION DRILLING See Figure 12. Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply. Check the direction of rotation lever for correct setting (forward or reverse). See Figure 4. Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates. Plug your drill into power supply source. Hold your drill firmly and place bit at the point to be drilled.
Streszczenie treści zawartej na stronie nr. 14
OPERATION CHUCK REMOVAL See Figure 13. The chuck must be removed in order to use some accessories. To remove: Unplug your drill. WARNING: Failure to unplug your drill could result in acciden- tal starting causing serious injury. Using two open-end wrenches, loosen the chuck. See Figure 13. This will loosen the chuck on the spindle. It can now be unscrewed by hand. TO RETIGHTEN A LOOSE CHUCK See Figure 14. The chuck may at times become loose on the spindle and Fig. 13 develop a
Streszczenie treści zawartej na stronie nr. 15
MAINTENANCE GENERAL LUBRICATION Avoid using solvents when cleaning plastic parts. Most All of the bearings in this tool are lubricated with a sufficient plastics are susceptible to damage from various types of amount of high-grade lubricant for the life of the unit under commercial solvents and may be damaged by their use. normal operating conditions. Therefore, no further Use clean cloths to remove dirt, carbon dust, etc. lubrication is required. WARNING: WARNING: Do not at any time let brake f
Streszczenie treści zawartej na stronie nr. 16
WARRANTY ® RIDGID HAND HELD AND STATIONARY POWER TOOL LIMITED THREE YEAR WARRANTY AND 90-DAY SATISFACTION GUARANTEE POLICY This product is manufactured under license from Ridgid, WHAT IS NOT COVERED Inc. by One World Technologies, Inc. All warranty This warranty applies only to the original purchaser at retail communications should be directed to One World and may not be transferred. This warranty only covers Technologies, Inc. at (toll-free) 1-866-539-1710. defects arising under normal usage an
Streszczenie treści zawartej na stronie nr. 17
NOTES 17
Streszczenie treści zawartej na stronie nr. 18
OPERATOR'S MANUAL ® HAMMER/PULSE DRILL R5010 Customer Service Information For parts or service, contact your nearest Ridgid authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgidwoodworking.com. The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided below.
