Streszczenie treści zawartej na stronie nr. 1
LP5 LEG PRESS 5
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
ASSEMBLY INSTRUCTIONS
CLASS H
1 Version: LP5A-101
PART# 7357701
Revision: 11/08/02
REV . B
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Safety Statement.............2 Assembly Instructions.....5-12 General Notes..................3 General Maintenance.......13 Tools Required................3 Warranty Statement.........14 Parts List.........................4 Product Services.............15 Insert-Registration Card IMPORTANT SAFETY INFORMATION THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES! 1. Before using, read all the warnings and instructions 6. Neve
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT NOTES Please note: * Thank you for purchasing the ParaBody LP5 Leg Press. Please read these instructions thoroughly and keep them for future reference. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. Tools Required for Assembly * 3/4” wrench * 9/16” wrench * Ratchet with 3/4” and 9/16” sockets * Adjustable wrench * Tape measur
Streszczenie treści zawartej na stronie nr. 4
PARTS LIST DESCRIPTION KEY PART # QTY KEY QTY DESCRIPTION PART # FRAME 1 ACU04-1444 1 10 8 ACUDC1250100020B 3/8” FLAT WASHER ACU04-1447 SEAT ADJUST 2 1 11 2 3/8” LOCK NUT ACUDB2E03811000B HANDLE 3 ACU04-1449 1 12 4 1/2 X 4-3/4” BOLT ACUDA1E02143413NB 4 ACU04-1445 MAIN ARM 1 4 13 ACUDB2E01212000B 1/2” LOCK NUT SECOND ARM 5 ACU04-1446 1 14 1 SPRING PIN KNOB ACU11-0080 FOOTPLATE 6 ACU04-1448 1 15 4 ACU05-0372 3/4 X 4” SHAFT ACU02-1298 PULLEY BRACKET 7 1 16 2 BUMPER, 1-1/2 X 2 ACU06-0437 PAD 8 ACU
Streszczenie treści zawartej na stronie nr. 5
For assembly to the GS1, GS2, GS4, GS8 Gym Systems . 4 Make sure MAIN ARM 9−1 /2" is orientated correctly 5 16 15 1 13 12 1/2 X 4-3/4” FIGURE 1 STEP 1: • NOTE: Follow STEP 1 for the assembly of the LEG PRESS to the GS1, GS2, GS4 and GS8 Gym Systems. If you have the CM3 or GS6 Gym System proceed to STEP 2. • NOTE: FLANGE BEARINGS SHOULD BE PRE-INSTALLED • SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 4-3/4” BOLT (12), one 3/4 X 4” SHAFT (15) and one 1/2
Streszczenie treści zawartej na stronie nr. 6
For assembly to the CM3 and GS6 Gym System . 4 11 − 1 /4 " Make sure MAIN ARM is orientated correctly 5 16 15 1 13 12 1/2 X 4-3/4” FIGURE 2 STEP 2: • NOTE: Follow STEP 2 for the assembly of the LEG PRESS to the CM3 and GS6 Gym System. If you have the GS1, GS2, GS4 or GS8 Gym Systems proceed to STEP 3. • NOTE: FLANGE BEARINGS SHOULD BE PRE-INSTALLED • SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 4-3/4” BOLT (12), one 3/4 X 4” SHAFT (15) and one 1/2” LOCK NUT
Streszczenie treści zawartej na stronie nr. 7
15 4 5 FIGURE 3 STEP 3: • Insert one 3/4 X 4” SHAFT (15) thru pre-installed FLANGE BEARINGS in the SECOND ARM (5) as shown in FIGURE 3. • Insert one 3/4 X 4” SHAFT (15) thru pre-installed FLANGE BEARINGS in the MAIN ARM (4) as shown in FIGURE 3. 1/2 1/2 1/2 1/2 1/2 1/2 0 1 2 34 5 6 7
Streszczenie treści zawartej na stronie nr. 8
6 13 5 4 12 1/2 X 4-3/4” FIGURE 4 STEP 4: • SECURELY assemble the FOOTPLATE (6) to the SECOND ARM (5) and the MAIN ARM (4) using two 1/2 X 4-3/4” BOLTS (12) and two 1/2” LOCK NUTS (13). See FIGURE 4. 8
Streszczenie treści zawartej na stronie nr. 9
3/8 X 3” 9 1 3 10 11 FIGURE 5 STEP 5: • SECURELY assemble the HANDLE (3) to the FRAME (1) using two 3/8 X 3” BOLTS (9), four 3/8” FLAT WASHERS (10) and two 3/ 8” LOCK NUTS (11) as shown in FIGURE 5. 1/2 1/2 1/2 1/2 1/2 1/2 0 1 2 34 5 6 9
Streszczenie treści zawartej na stronie nr. 10
2 14 17 1 FIGURE 6 STEP 6: • Securely assemble one PLUNGER PIN (14) to the FRAME (1) as shown. (NOTE: Screw PLUNGER PIN (14) in all the way) • Securely assemble one M4 SET SCREW (17) to the plunger pin barrel on the FRAME (1) then back off 1/4 turn so PLUNGER PIN (14) rotates freely until the threads come in contact with the M4 SET SCREW (17) • CAREFULLEY slide the SEAT ADJUST (2) into the FRAME (1) as shown. The SEAT can be adjusted by turning the SPRING PIN KNOB (14) clockwise and pu
Streszczenie treści zawartej na stronie nr. 11
8 2 10 9 3/8 X 3” FIGURE 7 STEP 7: • SECURELY assemble one PAD (8) to the SEAT ADJUST (2) using two 3/8 X 3” BOLTS (9) and two 3/8” FLAT WASHERS (10) as shown in FIGURE 7. 1/2 1/2 1/2 1/2 1/2 1/2 0 1 2 34 5 6 11
Streszczenie treści zawartej na stronie nr. 12
8 1 10 3/8 X 3” 9 7 FIGURE 8 STEP 8: • SECURELY assemble one PAD (8) to the FRAME (1) using two 3/8 X 3” BOLTS (9) and two 3/8” FLAT WASHERS (10) as shown in FIGURE 8. • Refer to the LEG PRESS ADAPTOR assembly instructions to attach the LP5 LEG PRESS to the home gym. The PULLEY BRACKET (7) will be attached at that time. Thank you for purchasing the Parabody LP5 LEG PRESS. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer s
Streszczenie treści zawartej na stronie nr. 13
MAINTENANCE Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your ParaBody customer service representative at (800) 328-9714. * Inspect equipment daily. Tighten all loose connections are replace worn parts immediately. Failure to do so may result in serious injury * PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION
Streszczenie treści zawartej na stronie nr. 14
LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product. 2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will
Streszczenie treści zawartej na stronie nr. 15
LIFE FITNESS 14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A. Tel: 763.323.4500 Fax: 763.323.4797 800.328.9714 (Toll-free within the U.S. and Canada) www.parabody.com INTERNATIONAL OFFICES Life FitnessAtlantic BV Life Fitness (UK) Ltd. Atlantic Headquarters Queen Adelaide Bijdorpplein 25-31 Ely, Cambs CB7 4UB 2992 LB Barendrecht United Kingdom The Netherlands Phone CSS: (01353) 665507 Phone: (180) 646 666 Fax CSS: (01353) 666719 Fax: (180) 646 703 Life Fitness EUROPE GmbH Lif
