Streszczenie treści zawartej na stronie nr. 1
813 VKR/CHIN/DIP GYM SYSTEM
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
USER’S GUIDE
CLASS H 1 Version: 813107
PART # 7075701 Revision: 08/06/01
REV. C
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Safety Statement.............2 Parts list..........................5 General Notes..................3 Assembly Instructions.....5-10 Tools Required................3 General Maintenance.......11 Gym Layout.....................4 Warranty Statement..........12 Product Services..............13 Insert-Registration Card IMPORTANT SAFETY INFORMATION THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES! 1. Before using, read all t
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT NOTES Please note: * Thank you for purchasing the ParaBody 813 Gym System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. Tools Required for Assembly * 9/
Streszczenie treści zawartej na stronie nr. 4
1’ 2’ 3’ 4’ 5’ 6’ 7’ 1’ 2’ 3’ 4’ 5’ 1 Square = 1’ X 1’ 4
Streszczenie treści zawartej na stronie nr. 5
PARTS LIST KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QTY 1 6102308 BASE CONNECTOR 1 9 3102802 3/8” LOCK NUT 14 2 6480008 CHIN BAR 1 10 3102904 3/8 X 3” BOLT 20 3 6480508 VKR SIDE 2 11 3103101 1-1/4 X 5” GRIP 2 4 6480908 UPPER BACK SUPPORT 1 12 3103103 1-1/4 X 7” GRIP 6 5 6665921 BACK PAD 1 13 6236701 1-3/4” SQ. END CAP 1 6 6752721 ARM PAD 2 14 6405201 2” SQ. END CAP 4 7 3102501 3/8” FLAT WASHER 34 15 6467001 2” SQ. COVER CAP 4 8 3102601 3/8” LOCK WASHER 6 16 7076708 PTD ASSY, BASE CONNEC
Streszczenie treści zawartej na stronie nr. 6
14 4 9 7 7 10 3/8 X 3” 16 3 9 7 1 10 3/8 X 3” FIGURE 2 STEP 2: • LOOSELY assemble the UPPER BACK SUPPORT (4) to the VKR SIDES (3) using four 3/8 X 3” BOLTS (10), eight 3/8” FLAT WASHERS (7), and four 3/8” LOCK NUTS (9) as shown in FIGURE 2. • LOOSELY assemble the two BASE CONNECTORS (1) and (16) to the VKR SIDES (3) using eight 3/8 X 3” BOLTS (10), sixteen 3/8” FLAT WASHERS (7), and eight 3/8” LOCK NUTS (9) as shown in FIGURE 2. • Insert one 2” SQ. END CAP (14) into the the end
Streszczenie treści zawartej na stronie nr. 7
10 3/8 X 3” 7 2 7 3 9 FIGURE 3 STEP 3: • LOOSELY assemble the CHIN BAR (2) to the VKR SIDES (3) using two 3/8 X 3” BOLTS (10), four 3/8” FLAT WASHERS (7), and two 3/8” LOCK NUTS (9). • SECURELY tigten all connections made up to this point. 7
Streszczenie treści zawartej na stronie nr. 8
3 6 7 8 3/8 X 3” 10 FIGURE 4 STEP 4: • SECURELY attach two ARM PADS (6) to the VKR SIDES (3) using four 3/8 X 3” BOLTS (10), four 3/8” LOCK WASHERS (8), and four 3/8” FLAT WASHERS (7) as shown in FIGURE 4. (NOTE: Place the high side of ARM PAD toward the outside.) 1/2 1/2 1/2 1/2 1/2 1/2 0 1 2 34 5 6 8
Streszczenie treści zawartej na stronie nr. 9
10 3/8 X 3” 4 8 7 5 FIGURE 5 STEP 5: • SECURELY assemble the BACK PAD (5) to the UPPER BACK SUPPORT (4) using two 3/8 X 3” BOLTS (10), two 3/8” LOCK WASHERS (8), two 3/8” FLAT WASHERS (7) as shown in FIGURE 5. 9
Streszczenie treści zawartej na stronie nr. 10
2 11 12 12 3 12 FIGURE 6 STEP 6: • Slide six 1-1/4 X 7” HANDLES (12) over the HANDLES of the VKR SIDES (3) and the CHIN BAR (2) as shown in FIGURE 6. • Slide two 1-1/4 X 5” HANDLES (11) over the ARM PAD HANDLES of the VKR SIDES (3) as shown in FIGURE 6. (NOTE: Rubbing alcohol can be used on the inside of the grips to make them slide on easier.) Thank you for purchasing the Parabody 813102 VKR/CHIN/DIP GYM SYSTEM. If unsure of proper use of equipment, call your local Parabody distributor o
Streszczenie treści zawartej na stronie nr. 11
MAINTENANCE Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your ParaBody customer service representative at (800) 328-9714. * Inspect equipment daily. Tighten all loose connections are replace worn parts immediately. Failure to do so may result in serious injury * PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION
Streszczenie treści zawartej na stronie nr. 12
LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product. 2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will
Streszczenie treści zawartej na stronie nr. 13
LIFE FITNESS CONSUMER DIVISION 14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A. Tel: 763.323.4500 Fax: 763.323.4797 800.328.9714 (Toll-free within the U.S. and Canada) www.parabody.com INTERNATIONAL OFFICES Life FitnessAtlantic BV Life Fitness (UK) Ltd. Atlantic Headquarters Queen Adelaide Bijdorpplein 25-31 Ely, Cambs CB7 4UB 2992 LB Barendrecht United Kingdom The Netherlands Phone CSS: (01353) 665507 Phone: (180) 646 666 Fax CSS: (01353) 666719 Fax: (180) 646 703 Life Fitne
