Streszczenie treści zawartej na stronie nr. 1
O W NER’S MANUAL
PM-200A
Powered Personal Stage Monitor
STAGE MONITOR
Streszczenie treści zawartej na stronie nr. 2
PM-200A Pow ered Personal Stage Monito r Congratulations—you have purchased one of the finest personal stage monitors on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO Powered Personal Stage Monitor has superior performance and greater flexibility than any other monitors in its price range. The PM-200A Powered Personal Stage Monitor is the perfect tool for monitoring audio on stage
Streszczenie treści zawartej na stronie nr. 3
WaRning An equilateral triangle enclosing a lightning flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed w
Streszczenie treści zawartej na stronie nr. 4
Panel ConTRols and ConneCTions 1. INPUTS The electronically balanced XLR MIC input is designed to accept signals from any balanced or unbalanced low impedance (Low Z) microphone. This input can also be used for low line level signals. Make sure to turn down the preceding unit to avoid distortion. The XLR jack is configured for: Pin1 = ground, Pin2 = positive (+), Pin3 = negative (-). Note, the Mic input is more sensitive than the Line input. The 1⁄4” TRS LINE input is designed to accept bal
Streszczenie treści zawartej na stronie nr. 5
Panel ConTRols and ConneCTions Note, the PM-200A internal speaker has been specially designed to reduce feedback frequencies while allowing maximum punch from center vocal and instrument tones. This allows clear and comprehensive monitoring with the speaker in close proximity with maximum feedback rejection. The speakers are not meant to be flat in audio quality or used for music reproduction. But when the band or DJ is pumping, they kick out exactly what you need...and then some! 5. EXTERN
Streszczenie treści zawartej na stronie nr. 6
Panel ConTRols and ConneCTions 10. FUSE COMPARTMENT Replace with only the same type fuse. If the fuse blows continuously, have the unit serviced by qualified personnel. The PM-200A powered mixer uses 20mm glass tube Fast Blow fuses: 6A 250V for 115VAC, 3A 250V for 230VAC. 11. AC VOLTAGE SELECTOR SWITCH Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz). 12. HEAT SINK The heat sink can get very hot during high
Streszczenie treści zawartej na stronie nr. 7
one-YeaR liMiTed W aRRanTY Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems. Please do not return your Nady product to the store where it w
Streszczenie treści zawartej na stronie nr. 8
SERVICE FOR YOUR NADY AUDIO PRODUCT In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www.nady.com for assistance. Should your wireless system require service, please contact the Nady Service Department at (510) 652-2411 for a Return Authorization (R/A) Number and service quote (if out of warranty). Make sure the R/A Number is clearly marked on the outside of the package that you are returning. If your unit is out of warranty, ple
