Streszczenie treści zawartej na stronie nr. 1
Operator’s Manual
Walk-Behind Snow Thrower
Mfg. No. Description
1695720 Dual Stage Snow Thrower, 14.5 TP, 29 Inch
Manual Part No. 1737921
Revision B
Rev. Date 04/2009
Streszczenie treści zawartej na stronie nr. 2
Thank you for purchasing this quality-built Murray snow thrower. We’re pleased that you’ve placed your confidence in the Murray brand. When operated and maintained according to the instructions in this manual, your Murray product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with snow throwers and how to avoid them. This snow thrower is designed and intended only for snow throwing and is not intended
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS OPERATOR SAFETY.................................................................................... 4 FEATURES AND CONTROLS .......................................................................... 10 OPERATION ............................................................................................. 12 BEFORE OPERATING SNOW THROWER................................................................................. 12 CHECK THE TIRES ...........................................
Streszczenie treści zawartej na stronie nr. 4
OPERATOR SAFETY Hazard Symbols and Meanings DANGER - Amputation Hazard The discharge chute contains a rotating Safety Alert – Identifies safety information about impeller to throw snow. Never clear or unclog hazards that can result in personal injury. the discharge chute with your hands. Fingers can quickly become caught and traumatic Operator’s Manual – Read and understand before amputation or severe laceration will result. performing any activity or running snow thrower. Always use a clean
Streszczenie treści zawartej na stronie nr. 5
OPERATOR SAFETY Control Symbols on Equipment Read the Manual DANGER Oil Read, understand, and follow all the instructions on the snow thrower and in the operator’s manual before operating this unit. Fuel Forward Failure to observe the safet y instructions in this manual will result in death or serious injury. On Off Neutral • Be thoroughly familiar with the controls and the proper use of the snow thrower. • Make sure you are properly trained before operating the snow thrower. Choke Off Reve
Streszczenie treści zawartej na stronie nr. 6
OPERATOR SAFETY Operation and Equipment Safety Fuel Handling DANGER DANGER Fuel and its vapors are extremely flammable and explosive. This snow thrower is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous. Always handle fuel with extreme care. Remember you are responsible for your safety and that of Failure to observe these safety instructions can cause a fire those around you. or explosion which will result in severe burns or death. • Keep the a
Streszczenie treści zawartej na stronie nr. 7
OPERATOR SAFETY Moving Parts Children DANGER DANGER Keep hands, feet, and clothing away from rotating parts. Tragic accidents can occur if the operator is not alert to the Rotating parts can contact or entangle hands, feet, hair, presence of children. Children are often attracted to the unit clothing, or accessories. and the operating activity. Never assume that children will remain where you last saw them. Failure to observe these safety instructions will result in traumatic amputation or seve
Streszczenie treści zawartej na stronie nr. 8
OPERATOR SAFETY Maintenance and Storage Engine Safety (Continued) WARNING WARNING This snow thrower must be properly maintained to ensure safe Starting engine creates sparking. operation and performance. Failure to observe the safety Sparking can ignite nearby flammable gases. instructions in this manual could result in death or serious Explosion and fire could result. injury. • When performing any maintenance or repairs on the snow thrower, shut OFF - the engine, disconnect spark plug wire, an
Streszczenie treści zawartej na stronie nr. 9
OPERATOR SAFETY Look for this symbol to indicate important safety WARNING: IIf any safety decals become worn or damaged and pre cautions. This symbol indicates: “Attention! cannot be read, order replacement decals from your local dealer. Become Alert! Your Safety Is At Risk.” Before operating your snow thrower, read the safety decals as shown on your snow thrower. The cautions and warnings are for your safety. To avoid a personal injury or damage to your snow thrower, understand and follow a
Streszczenie treści zawartej na stronie nr. 10
FEATURES AND CONTROLS NOTICE: Read this OPERATOR’S MANUAL and OPERATOR SAFETY before operating your snow thrower. Compare the illustrations with your SNOW THROWER to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. H A G F B D E C I STOP Engine Controls Figure 2 ENGINE AND SNOW THROWER CONTROLS ENGINE CONTROLS G. Fuel Tank and Cap A. Choke Control — Used to start a cold engine (see Figure 2). H. Oil Fill Cap B. Electric Start Bu
Streszczenie treści zawartej na stronie nr. 11
FEATURES AND CONTROLS A C J E I H H 1 2 B D G F Snow Thrower Controls Figure 3 B. Auger Drive Clutch Lever — Used to engage and disengage the G. Clean-Out Tool — Used to remove snow and debris from the dis- auger and impeller. To engage push down, to disengage release. charge chute and the auger housing. TM C. Traction Drive Clutch Lever — Used to propel snow thrower for- H. Free-Hand Control — After engaging the traction control (left ward or reverse. Push down to engage, release to disengage
Streszczenie treści zawartej na stronie nr. 12
OPERATION BEFORE OPERATING SNOW THROWER NOTE: This snow thrower was shipped WITH OIL in the ■ ■ Check the fasteners. Make sure all fasteners are tight. engine. See “Before Starting Engine” instructions in the OPERATION section of this manual before starting engine. ■ ■ On electric start models, the unit was shipped with the starter cord plugged into the engine. Before operating, unplug the starter cord from the engine. CHECK THE TIRES Check tires for damage. Check the air pressure in the tires w
Streszczenie treści zawartej na stronie nr. 13
OPERATION WARNING: The operation of any snow thrower can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before beginning snow thrower operation. We recommend standard safety glasses or Wide Vision Safety Mask over spectacles. NOTE: Always release the traction control lever before moving OPERATE THE SNOW THROWER the speed select lever. CAUTION: Operation with a Snow Cab. Wind may blow exhaust gasses back towar
Streszczenie treści zawartej na stronie nr. 14
OPERATION Full Traction Figure 7 TRACTION LOCK PINS The right traction wheel can be completely released using the locking pin (A A, Figure 8). This allows the unit to be easily moved with the engine off. TM Easy-Turn Control Figure 6 TM EASY-TURN TRACTION CONTROL TM For easy turning when using the snow thrower, squeeze the Easy-Turn lever (see Figure 6). A A TM Engagin
Streszczenie treści zawartej na stronie nr. 15
OPERATION CHECK THE OIL (BEFORE STARTING ENGINE) TEMPERATURE TYPE OF OIL 0°F (-18°C) and above S.A.E. 5W30 NOTE: The engine was shipped from the factory filled with oil. Check the level of the oil. Add oil as needed. 0°F (-18°C) and below Synthetic 5W30 1. Make sure the unit is level. Use a high quality detergent oil classified “For Service SG, SH, SJ, SL, or higher”. SAE VISCOSITY GRADES 2. Remove the oil fill cap/dipstick (A A, Figure 9) and wipe with a clean cloth. 3. Insert the oil fill cap/
Streszczenie treści zawartej na stronie nr. 16
OPERATION FILL THE FUEL TANK WARNING: Gasoline is flammable. Always use caution when handling or storing gasoline. Turn This engine is certified to operate on gasoline. Exhaust Emission Control engine off and let engine cool at least two minutes before System: EM (Engine Modifications). removing the gas cap. Do not add gasoline to the fuel tank Fill the fuel tank with fresh, clean, unleaded regular, unleaded premium, or re- while snow thrower is running, hot, or when snow thrower formulated auto
Streszczenie treści zawartej na stronie nr. 17
OPERATION 9. Electric Start: Depress the starter push button (A A, Figure 13). After you start the engine, first disconnect the extension cord from the wall receptacle and then from the power cord receptacle (B B). C B A A Inserting Safety Key Figure 11 Starting with Cord Handle Figure 12 7. Rewind Start: Firmly hold the starter cord handle (A A, Figure 12)
Streszczenie treści zawartej na stronie nr. 18
OPERATION OPERATING TIPS CLEAR A CLOGGED DISCHARGE CHUTE 1. Most efficient snowthrowing is accomplished when snow is removed DANGER: Hand contact with the rotating impeller inside immediately after it falls. the discharge chute is the most common cause of injury 2. For complete snow removal, slightly overlap each swath previously taken. associated with snow throwers. Never clear or unclog 3. Snow should be discharged downwind whenever possible. discharge chute with your hands, or while engine is
Streszczenie treści zawartej na stronie nr. 19
MAINTENANCE SERVICE RECOMMENDATIONS FIRST BEFORE EVERY EVERY EVERY BEGINNING BEFORE PROCEDURE 2 EACH OFTEN 5 10 25 EACH STORAGE HOURS USE HOURS HOURS HOURS SEASON Tighten all Screws and ✓ ✓ ✓ Nuts Check Traction Clutch Cable Adjustment (See ✓ ✓ Cable Adjustment) Check Auger Clutch Cable Adjustment (See ✓ ✓ ✓ Cable Adjustment) SNOW THROWER Adjust Drive Belts ✓ ✓ ✓ Lubricate Chains and Hex ✓ ✓ Shaft Lubricate Auger Shaft (See Shear Pin Replace- ✓ ✓ ment) Lubricate Free-Hand ✓ ✓ ✓ Linkage Oil, Chec
Streszczenie treści zawartej na stronie nr. 20
MAINTENANCE LUBRICATE AUGER GEAR BOX The auger gear box is lubricated at the factory and should not require additional lubrication. If for some reason the lubricant should leak out, or if the auger gear box has been serviced, add Lubriplate GR132 Grease or equivalent. Maximum 3- 1/4 ounces, (92 grams) should be used. Remove filler plug (A A, Figure 16), once a year. If grease is visible, do not add. If grease is not visible, use a piece of fine wire, like a dipstick to check Lubricating Controls
