Instrukcja obsługi MTD 753-05193

Streszczenie treści zawartej na stronie nr. 1

Date:
9/23/2005
Subject: Log Splitter Wedge Shim
Service Kit
2004 and 2005 Model Year Log
Models
753-05193
Splitters built between May 1,
Affected:
2004 and September 15, 2005.
Read through and understand these instructions completely before proceeding with repair.

PURPOSE:

This service kit provides a shim (spacer) to reduce the gap between the end of the cylinder ram and the back of the
wedge. Perform the Pre-service Inspection to determine if this kit is required or not.
NOTE:

Streszczenie treści zawartej na stronie nr. 2

9. Using two 3/4” wrenches, remove and discard the NOTES bolt and nut securing the cylinder ram to the wedge. 10. Slide the wedge away from the cylinder ram enough to slip the Shim Assembly, Item 1, between the wedge and cylinder ram. See Figure 3. SHIM ASSEMBLY (ITEM 1) WEDGE EARS CYLINDER RAM FIGURE 3 11. Re-align the hole in the cylinder ram end and the holes in the wedge ears. 12. Slip the new 1/2”-13 x 3.25 Screw, Item 2, through the wedge, cylinder ram and shim assembly holes. 13. S