Streszczenie treści zawartej na stronie nr. 1
Under Cabinet
CD Clock Radio with Remote
MODEL SCR2608
INSERUCTION MANUAL
Operating Instructions
BEFORE OPERATION THIS PRODUCT, READ, UNDERSTAND,
AND FOLLOW THESE INSTRUCTIONS.
Be sure to save this booklet for future reference.
Streszczenie treści zawartej na stronie nr. 2
IMPORTANT SAFETY INSTRUCTIONS The exclamation point within an The Lightning flash with arrowhead CAUTION: TO REDUCE THE RISK OF symbol, with an equilateral triangle is ELECTRIC SHOCK, DO NOT equilateral triangle is intended to alert intended to alert the user of the REMOVE COVER (OR BACK). NO the user of the presence of important operating and maintenance (servicing) presence of uninsulated dangerous USER SERVICEABLE PARTS INSIDE. voltage within the product’s enclosure REFER SER
Streszczenie treści zawartej na stronie nr. 3
Object and Liquid entry-Care should be taken so that objects do not fall and liquids are not spilled into the housing. Damage Requiring Service-The appliance should be serviced by qualified service personnel when: • The Power-supply cord or the plug has been damaged; or • Object have fallen or liquid has been spilled into the appliance; or • The appliance has been exposed to rain ; or • The appliance does not appear to operate normally or exhibits a marked changed in performance ;or • Th
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT INFORMATION REQUIRED BY THE FCC Since the Compact Disc (CD) circuitry may cause interference to other radios nearby, switch this set off when not in use or move it away from the affected radios. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received , including interference that may cause undesirable operation. NOTE
Streszczenie treści zawartej na stronie nr. 5
LOCATION OF CONTROLS 1. LCD DISPLAY- A (for CD, CLOCK AND RADIO) 13. FAST FORWARD (SKIP >>|) BUTTON 2. VOLUME DOWN 14. REWIND (SKIP |<<) BUTTON 3. VOLUME UP 15. STOP/ RADIO BAND BUTTON 4. CD DRAWER 16. PLAY/PAUSE BUTTON 5. REMOTE SENSOR 17. RADIO BUTTON 6. POWER ON INDICATOR 18. CD BUTTON 7. POWER/ ALARM OFF BUTTON 19. DISPLAY/ALARM SET BUTTON 8. CD DRAWER OPEN/CLOSE BUTTON 20. MEMORY/CLOCK ADJUST BUTTON 9. LCD DISPLAY B (FOR TIMER) 21. REPEAT/MEMORY. RECALL BUTTON 10. MI
Streszczenie treści zawartej na stronie nr. 6
REMOTE CONTROL 1. OPEN /CLOSE KEY 10. SNOOZE KEY 2. PLAY/PAUSE KEY 11. ALARM SET KEY 3. FAST FORWARD (SKIP >>|) BUTTON 12. SLEEP KEY 4. VOLUME UP KEY 13. EQUALIZATION PRESET KEY (EQ) 5. VOLUME DOWN KEY 14. REPEAT KEY 6. REWIND (SKIP |<<) BUTTON 15. FUNCTION KEY ( to select the CD, Radio function) 7. RANDOM KEY 16. STOP/RADIO BAND KEY 8. MUTE KEY 17. POWER/ ALARM OFF KEY 9. CD/ RADIO MEMORY KEY (MEM) 18. Battery compartment (for Remote control) Insert two(2) “AAA ” /1.5V(no
Streszczenie treści zawartej na stronie nr. 7
Under Cabinet Mounting Instructions Tools Required Drill and 1/4” Drill Bit Ruler or Tape Measure Nail or Awl Scissors Screwdriver – Phillips Countersink (Optional) Masking Tape Safety Glasses
Streszczenie treści zawartej na stronie nr. 8
1 – Mounting template Parts Packed with your unit 1. Spacers (3pcs of 1/4” , 3pcs of 1/2”, 3pcs of 1”) 2. Washers (3pcs) 3. Phillips head screws (3pcs of 2 3/4”, 3pcs of 1 5/8”) 4. Mounting Template Before Mounting Empty contest of the selected cabinet under which the unit will be mounted and thoroughly clean the underside of the cabinet to remove any grease residue which might be present. We recommend the unit be mounted at the front edge of
Streszczenie treści zawartej na stronie nr. 9
Mounting Procedure Step 1. If your cabinet does not have a overhang: a) Position template in desired location on underside of cabinet, flush with front edge. b) Then tape template in pace and go to step 2. If your cabinet have overhang: a) Measure the thickness of the overhang. b) Fold front of the template downward along the printed guideline that is closet to the thickness of your cabinet. c) Tape fold-down portion to backside of overhand, tape template to cabinet unders
Streszczenie treści zawartej na stronie nr. 10
Helpful Hints: On wooden cabinets you may want to mark and start the drill holes with a nail or an awl. Be sure to hold the drill very firmly against the cabinet to reduce “walking” of the drill bit from the markings. Using masking tape above the hole locations on inside of wooden cabinet shelf to help reduce splintering. If installing the unit under a wood cabinet, you may wish to countersink the drilled hold for the INSIDE of the cabinet if a countersink the holes use the supplied washe
Streszczenie treści zawartej na stronie nr. 11
FULL LCD DISPLAY UNIT POWER SUPPLY ( Mains 120V/60Hz) Connect the power cable plug to the (120V) wall outlet. Warning: Before using the unit. Check that the local mains supply is compatible with the HI-FI System (120V 60Hz) Do not plug or unplug the power cable when your hands wet. When planning not to use this unit for long periods of time (i.e Vacation etc.) disconnect the plug from the wall outlet. When disconnecting the power cord from the wall outlet, grasp the plug; do not pull
Streszczenie treści zawartej na stronie nr. 12
CLOCK SETTING 1. While in the CD or Radio mode, Press “Display/AL.Set” two time to enter the time mode. 2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to hour adjustment mode( Hour will begin to flash) 3. Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm -> 9:27am) 4. Press MEMORY/C-ADJ button, enter to minute adjustment mode.( Minute will begin to flash) d . Press SKIP >>| or SKIP |<< button to desired time. (e.g. 9:27am -> 9:20am) e) and then press MEMO
Streszczenie treści zawartej na stronie nr. 13
ALARM TIME SETTING 1. While in the CD or Radio mode, Press “Display/AL.Set” one time to enter the alarm time set mode. (The bell icon “ ” will appear and begin to flash) 2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to alarm hour adjustment mode (Alarm hour will begin to flash) 3. Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm -> 9:27am) Press MEMORY/C-ADJ button, enter to alarm minute adjustment mode. ( Alarm minute will begin to flash) Press S
Streszczenie treści zawartej na stronie nr. 14
TO WAKE UP TO CD: a. Power on the unit by pressing the Power/AL. off button. b. Open the CD DRAWER and insert a CD (with the label side facing up) into the CD compartment. c. Close the CD DRAWER. d. Power off the unit by pressing the Power/AL. off button. e. Press AL.SET KEY (on the remote controller) repeatedly to select CD mode. (“CD” indicator will appear and cd indicator will begin to flash) f. You can use SKIP >>| or SKIP|<< to select the track as be auto-played during the fl
Streszczenie treści zawartej na stronie nr. 15
TIMER FUNCTION (0:01 --------19:59) 1. Continue press the HOUR SET button (T/HOUR) adjust the hour of the time. (from 19: --to 0: --) 2. Continue press the MINUTE SET button (T/MIN) adjust the minute of the time. (from --:59 to -- : 00) 3. When the count-down time reach to zero, the system will alarm for 3 minutes 4. To tune off the timer alarm. Simply PRESS and HOLD the Hour set button (T/HOUR) and Minute set button (T/Minute) for 3-5 seconds the timer will be turn off. Note: The ra
Streszczenie treści zawartej na stronie nr. 16
RADIO SECTION RADIO RECEPTION NOTE: In Radio operation mode, press Display/AL.Set button to display the clock time. 1. Press Power/AL. off button to turn on the unit. 2. Press RADIO button to select radio. 3. Select AM/FM band by pressing the STOP/BAND button. AM and FM are alternately selected each time when the STOP/BAND button is pressed. 4. How to use the buttons for radio a. Manual Tuning ----Higher frequency can be selected by pressing the “SKIP >>|” button ----Lower frequ
Streszczenie treści zawartej na stronie nr. 17
OPERATION OF CD PLAYER Power ON in CD mode and indicate the total tracks which contain in the disc If open the CD DRAWER or there is no disc inside the unit, “00” display will be indicated on the display. PLAYING A CD 1. Turn on the unit by pressing the POWER/ AL. OFF button 2. Press CD button to select CD function. 3. Press Open/Close button to open the CD drawer. 4. Insert a CD with the label facing up. 5. Close the CD Door by pressing Open/Close button. TOC readi
Streszczenie treści zawartej na stronie nr. 18
SKIPPING TRACKS Press during play. Backward------------SKIP |<< button Fast Forward------------SKIP >>| button Press SKIP |<< button twice to skip to the beginning of the previous track. Press SKIP >>| button once to skip to the beginning of the next track. SEARCHING TRACKS Press and hold during play Backward------------SKIP |<< button Fast Forward------------SKIP >>| button PROGRAMMED PLAYBACK Up to 20 tracks can be programmed in to play in any desired sequence. 1. Turn
Streszczenie treści zawartej na stronie nr. 19
TROUBLESHOOTING GUIDE You experience a problem with this unit check the chart below before calling of service. SYMPTOM CAUSE SOLUTION System will ---AC Cord not connected Reinsert the AC cord Not turn on properly ---Disc inserted incorrectly ---Reinsert disc with label Disc will not ---Defective compact disc side facing up Play ---CD compartment not closed ---Try another compact disc ---Moisture condensation ---Close CD compartment on dis
