Streszczenie treści zawartej na stronie nr. 1
874 MULTI-ANGLE BENCH SYSTEM
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
USER’S GUIDE
CLASS H 1 Version: 874108
PART # 7349001 Revision: 09/24/02
REV . A
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Safety Statement.............2 Parts list..........................5 General Notes..................3 Assembly Instructions.....5-9 Tools Required................3 General Maintenance.......10 Gym Layout.....................4 Warranty Statement..........11 Product Services..............12 Insert-Registration Card IMPORTANT SAFETY INFORMATION THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES! 1. Before using, read all th
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT NOTES Please note: * Thank you for purchasing the ParaBody 874 Multi-Angle Bench System. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. Tools Required for
Streszczenie treści zawartej na stronie nr. 4
1’ 3’ 2’ 4’ 5’ 1’ 2’ 3’ 4’ 5’ 6’ 7’ 1 Square = 1’ X 1’ 4
Streszczenie treści zawartej na stronie nr. 5
PARTS LIST KEY DESCRIPTION QTY KEY DESCRIPTION QTY PART # PART # THUMBSCREW 1 LEA6650609 BENCH FRAME 1 16 LEA6145801 1 2 LEA6650109 ADJUSTABLE SLIDE 1 17 3/8 X 1” BOLT 6 LEA3235204 3/8 X 3” BOLT 3 LEA6649309 ADJUSTABLE SLEEVE 1 18 LEA3235212 4 4 LEA6624210 LEFT BACK PAD ANGLE 1 19 LEA3114403 3/8” WASHER 14 5 RIGHT BACK PAD ANGLE 1 20 3/8” LOCK NUT 4 LEA6624310 LEA3114702 1/2 X 3-3/4” BOLT 6 LEA6259109 FRONT BASE 1 21 LEA3235315 1 7 LEA6655709 REAR BASE 1 22 1/2 X 5-1/2” BOLT 1 LEA3235322 1/2 X 8
Streszczenie treści zawartej na stronie nr. 6
15 20 1 19 19 7 18 3/8 X 3” 19 20 19 18 3/8 X 3” 6 15 FIGURE 2 STEP 2: • Slide four 2” SQ. COVER CAPS (15) over the ends of the FRONT & REAR BASE (6 & 7) as shown in FIGURE 2. • SECURELY assemble the FRONT BASE (6) to the BENCH FRAME (1) using two 3/8 X 3” BOLTS (18), four 3/8” WASHERS (19), and two 3/8” LOCK NUTS (20). See FIGURE 2. • SECURELY assemble the REAR BASE (7) to the BENCH FRAME (1) using two 3/8 X 3” BOLTS (18), four 3/8” WASHERS (19), and two 3/8” LOCK NUTS (20). Se
Streszczenie treści zawartej na stronie nr. 7
2 28 3 11 24 1/2” LOW HEIGHT 27 1 12 27 1/2 X 3-3/4” 21 FIGURE 3 STEP 3: • SECURELY assemble one SPRING PIN ASSEMBLY (11) to the spring pin barrel on the ADJUSTABLE SLEEVE (3). See FIGURE 3. • Attach eight 3/4 X 1-1/2” GLIDES (28) to the inside of the ADJUSTABLE SLEEVE (3) as shown in FIGURE 3 using the following steps: • Thoroughly clean all surfaces where the 3/4 X 1-1/2” GLIDES (28) are to be attached. • Remove the 3/4 X 1-1/2” GLIDES (28) from the paper backing and firml
Streszczenie treści zawartej na stronie nr. 8
24 1/2” LOW HEIGHT 5 2 4 24 1/2” LOW HEIGHT 10 22 1/2 X 5-1/2” 1 1/2 X 8” 23 FIGURE 4 STEP 4: • Assemble the LEFT and RIGHT BACK PAD ANGLE (4 & 5) and two HINGE TABS (10) to the BENCH FRAME (1) using one 1/2 X 8” BOLT (23) and one 1/2” LOW HEIGHT LOCK NUT (24) as shown in FIGURE 4. • Assemble the LEFT and RIGHT BACK PAD ANGLE (4 & 5) to the ADJUSTABLE SLIDE (2) using one 1/2 X 5-1/2” BOLT (22) and one 1/2” LOW HEIGHT LOCK NUT (24) as shown in FIGURE 4. 1/2 1/2 1/2 1/2 1/2 1/2 0 1 2 3
Streszczenie treści zawartej na stronie nr. 9
9 5 8 4 10 14 13 19 3/8 X 1” 17 FIGURE 5 STEP 5: • SECURELY assemble the SEAT PAD (8) to the HINGE TABS (10) using two 3/8 X 1” BOLTS (17) and two 3/8” WASHERS (19) as shown in FIGURE 5. • SECURELY assemble the BACK PAD (9) to the LEFT BACK PAD ANGLE (4) and the RIGHT BACK PAD ANGLE (5) using four 3/8 X 1” BOLTS (17) and four 3/8” WASHERS (19) as shown in FIGURE 5. • Slide one 2” SQ. END CAP (14) into the top of the BENCH FRAME (1) as shown in FIGURE 5. • Slide one 3 X 2” END CAP
Streszczenie treści zawartej na stronie nr. 10
MAINTENANCE Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your ParaBody customer service representative at (800) 328-9714. * Inspect equipment daily. Tighten all loose connections are replace worn parts immediately. Failure to do so may result in serious injury * PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION
Streszczenie treści zawartej na stronie nr. 11
LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product. 2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will
Streszczenie treści zawartej na stronie nr. 12
LIFE FITNESS CONSUMER DIVISION 14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A. Tel: 763.323.4500 Fax: 763.323.4797 800.328.9714 (Toll-free within the U.S. and Canada) www.parabody.com INTERNATIONAL OFFICES Life FitnessAtlantic BV Life Fitness (UK) Ltd. Atlantic Headquarters Queen Adelaide Bijdorpplein 25-31 Ely, Cambs CB7 4UB 2992 LB Barendrecht United Kingdom The Netherlands Phone CSS: (01353) 665507 Phone: (180) 646 666 Fax CSS: (01353) 666719 Fax: (180) 646 703 Life Fitne
