Instrukcja obsługi Ken-A-Vision , Inc.T-1201

Streszczenie treści zawartej na stronie nr. 1

dissipation and shorten the life of the bulb. Use two fingers and pull the
bulb out touching the metal part of the bulb. Clean the bulb surface with
alcohol and lens paper if the user has touched the bulb surface accidental-
ly. Any larger watt bulb may cause damage to the unit.
d. Specification of the 10 watt bulb can be found on the surface of the
microscope. Replacement bulbs (Part # T115V10WB) may be purchased
on Ken-A-Vision web site under accessories at www.ken-a-vision.com
CARE AND MAINTE

Streszczenie treści zawartej na stronie nr. 2

PREPSCOPE be very close to the slide, but not touching. APPLICATION OPERATION Thank you for purchasing your Ken-A-Vision microscope. We designed Built-In Illuminator (model T-1201 and T-1202) this compact microscope with optical quality and to withstand student Turn off the power switch, located on the side of the microscope, use. The contoured metal base is covered with high-density plastic to before connecting the power cord. Bulb replacement can be done from prevent chipping during normal st