Streszczenie treści zawartej na stronie nr. 1
335XPT California
Operator's manual (EPA)
Read these instructions carefully and make sure
you understand them before using the saw.
101 91 92-95
Streszczenie treści zawartej na stronie nr. 2
KEY TO SYMBOLS Symbols CAUTION! Chain saws can be dangerous! Switch off the engine by moving the stop Careless or incorrect use can result in switch to the STOP position before serious or fatal injury to the operator or carrying out any checks or maintenance. others. Please read the instructions carefully and Operating position make sure you understand them before using the saw. Always wear: • Approved protective helmet Choke • Approved hearing protection • Protective glasses or visor Always wea
Streszczenie treści zawartej na stronie nr. 3
CONTENTS Before using a new saw Contents • Read the instructions carefully. • Check cutting equipment is correctly fitted and adjusted. See page 25. Key to symbols ......................................................... 2 • Refuel and start the saw. Check the carburetor settings. See pages 26-29. Safety instructions • Do not use the saw until sufficient chain oil has reached the Personal protective equipment ................................. 4 chain, see page 14. Chain saw safety equipment ...
Streszczenie treści zawartej na stronie nr. 4
SAFETY INSTRUCTIONS PERSONAL PROTECTIVE EQUIPMENT CHAIN SAW SAFETY EQUIPMENT This section explains the various safety features of the saw, how they work, and basic inspection and maintenance you MOST CHAIN SAW ACCIDENTS HAPPEN should carry out to ensure safe operation. (See the ”What is WHEN THE CHAIN TOUCHES THE OPERA- what?” section to find out where these components are on Your TOR. You must wear approved protective saw). equipment whenever you use a chain saw. Personal protective equipment c
Streszczenie treści zawartej na stronie nr. 5
SAFETY INSTRUCTIONS 2 The front hand guard is 1 Chain brake and front hand guard not designed solely to YOUR chain saw is equipped with a chain brake that is desig- activate the chain brake. ned to stop the chain immediately if you get a kickback. Another important safety The chain brake reduces the risk of accidents, but only You can feature is that it prevents prevent them. the chain from hitting your left hand if you lose your Take care when using your grip on the front handle. saw and make s
Streszczenie treści zawartej na stronie nr. 6
SAFETY INSTRUCTIONS 6 The way the chain brake is triggered, either manually or 2 Throttle lock automatically, depends on the force of the kickback and the The throttle lock is designed position of the chain saw in relation to the object that the to prevent accidental opera- kickback zone of the bar strikes. A tion of the throttle control. When you press the lock (A) (i.e. when you grasp the If you get a violent handle) it releases the throttle kickback while the trigger (B). kickback zone of the
Streszczenie treści zawartej na stronie nr. 7
SAFETY INSTRUCTIONS 4 Vibration damping system 5 Stop switch Your chain saw is equipped with a vibration damping Use the stop switch to switch system that is designed to off the engine. minimise vibrations in the handles and make operation easier. When you use a chain saw vibrations are generated by the uneven contact between the chain and the wood you are cutting. Cutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conifers). Cutting with a chain that is
Streszczenie treści zawartej na stronie nr. 8
SAFETY INSTRUCTIONS 3 Checking the brake trigger Inspecting, maintaining and servicing chain saw safety equipment WARNING! NEVER start the chain saw without activating SPECIAL TRAINING IS REQUIRED to service the chain brake first! and repair chain saws. This is especially true of chain saw safety equipment. If your chain saw fails any of the checks described below Place the chain saw on take it to your SERVICE AGENT. firm ground and start it. When you buy any of our products we Make sure the cha
Streszczenie treści zawartej na stronie nr. 9
SAFETY INSTRUCTIONS 2 Throttle lock 3 Chain catcher 1 Make sure the throttle Check that the CHAIN control is locked at the CATCHER is not idle setting when you damaged and is firmly release the throttle lock. attached to the body of the saw. 2 Press the throttle lock and make sure it returns to its 4 Vibration damping system original position when you release it. Regularly check the vibration damping units for cracks or deformation 3 Check that the throttle control and throttle lock move freely
Streszczenie treści zawartej na stronie nr. 10
SAFETY INSTRUCTIONS 7 Muffler CUTTING EQUIPMENT Never use a chain saw This section describes how to choose and maintain your cutting that has a faulty muffler. equipment in order to: • Reduce the risk of kickback. • Reduce the risk of the chain breaking or jumping. • Obtain maximum cutting performance. • Extend the life of cutting equipment. The 5 basic rules 1 Only use cutting equipment recommended by us! See the ”Technical data” section. Regularly check that the muffler is securely attached to
Streszczenie treści zawartej na stronie nr. 11
SAFETY INSTRUCTIONS C Some terms that describe the bar and chain 1 Cutting equipment designed to minimise When the cutting equipment supplied with your saw becomes kickback worn or damaged you will need to replace it. Use only the type of bar and chain recommended by us. See the ”Technical data” Faulty cutting equipment or the wrong section to find out which equipment is recommended for your combination of bar and chain increases the saw. risk of kickback. Use only the bar and chain combinations
Streszczenie treści zawartej na stronie nr. 12
SAFETY INSTRUCTIONS It is very difficult to sharpen a 2 Sharpening your chain and adjusting chain correctly without the raker clearance right equipment. We recommend you use a file The risk of kickback is increased with a badly gauge. This will help you sharpened chain! obtain the maximum kickback reduction and cutting performance from your chain. A General information on sharpening cutting teeth • Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar
Streszczenie treści zawartej na stronie nr. 13
SAFETY INSTRUCTIONS C General advice on setting raker clearance D Setting the raker clearance • When you sharpen the cutting teeth you reduce the RAKER CLEARANCE (cutting depth). To maintain • Before setting the raker clearance the cutting teeth should be cutting performance you newly sharpened. must file back the raker We recommend that you adjust the raker clearance every teeth to the recommended third time you sharpen the chain. NOTE! This height. recommendation assumes that the length of the
Streszczenie treści zawartej na stronie nr. 14
SAFETY INSTRUCTIONS 4 Lubricating cutting equipment Poor lubrication of cutting equipment may cause the chain to snap and lead to serious, 1 Undo the bar nuts that even fatal injuries. hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by A Chain oil hand as tight as you can. • Chainsaw chain oil must demonstrate good adhesion to the chain and also maintain its flow caracteristics regardless of whether it is warm summer or cold winter weather. 2 Raise the
Streszczenie treści zawartej na stronie nr. 15
SAFETY INSTRUCTIONS C Checking chain lubrication E Checking wear on cutting equipment Saw chain • Check the chain lubrication each time you refuel. Aim the tip of the saw at a light coloured surface about Check the saw chain daily for: 20 cm away. After 1 minute • Visible cracks in rivets and running at 3/4 throttle you links. should see a distinct line of • Whether the chain is stiff. oil on the light surface. • Whether rivets and links are badly worn. We recommend you compare the existing chai
Streszczenie treści zawartej na stronie nr. 16
SAFETY INSTRUCTIONS H Bar HOW TO AVOID KICKBACK Kickback can happen very suddenly and violently; kicking the saw, bar and chain back at the user. If this happens when the chain is Check regularly: moving it can cause very serious, even fatal injuries. It is vital you understand what causes kickback and that you can avoid it by taking • Whether there are burrs on care and using the right working technique. the edges of the bar. Remove these with a file if necessary. What is kickback? The word kic
Streszczenie treści zawartej na stronie nr. 17
SAFETY INSTRUCTIONS If you have to saw tree General rules limbs or the like that are above shoulder heigth, WARNING! stand on a work platform In order to keep control of your saw always or a work stand. Never maintain a firm foothold. Never work on a saw while standing on a ladder or any other insecure support. ladder. Never work in a tree unless you have specific, professional training for such work, are properly secured (such as tackle and harness system or a life buckel), have both hands free
Streszczenie treści zawartej na stronie nr. 18
SAFETY INSTRUCTIONS 7 FUEL SAFETY GENERAL SAFETY PRECAUTIONS (Refuelling, fuel mixture, storage.) 1 Chain saws are designed solely for cutting wood. The only cutting equipment that can be used with this chain saw are the combinations of bars and chains recommended in the Fuel and fuel vapour are highly inflammable. ”Technical data” section. Take care when handling fuel and chain oil. Keep away from naked flames and do not 2 Never use a chain saw if breathe in fuel vapour. you are tired, if you h
Streszczenie treści zawartej na stronie nr. 19
SAFETY INSTRUCTIONS 4 Check the area around GENERAL WORKING INSTRUCTIONS you for possible obstacles such as roots, rocks, This section describes basic safety rules for branches, ditches, etc., in using a chain saw. This information is no case you have to move substitute for professional skills and suddenly. Take great care experience. If you get into a situation where when working on sloping you feel unsafe, stop and seek expert advice ground. (look under FORESTRY SERVICES in the telephone direc
Streszczenie treści zawartej na stronie nr. 20
SAFETY INSTRUCTIONS Two factors decide whether the chain will jam or the log will 2 Basic cutting technique split. The first is how the log is supported and the second is General whether it is in tension. • Always use full throttle when cutting! In most cases you can avoid these problems by cutting in two • Reduce the speed to idle after every cut (running the stages; from the top and from the bottom of the log. You need engine for too long at full throttle without any load can lead to to suppor
