Streszczenie treści zawartej na stronie nr. 1
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: _______________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
41936-01 • 11/18/05
Streszczenie treści zawartej na stronie nr. 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. is installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepla
Streszczenie treści zawartej na stronie nr. 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation fl exibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profi le, Standard, or Angle mounting. e steps in this manual include instructions for all three Installer’s Choice mounting methods. Low Profi le Mounting fi ts close to the ceiling, recommen
Streszczenie treści zawartej na stronie nr. 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Streszczenie treści zawartej na stronie nr. 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Isolator disconnect the power by turning off the circuit breakers to the outlet box Ceiling and associated wall switch location. If you cannot lock the circuit breakers Plate in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the Step 2-2 outermost holes in the outlet
Streszczenie treści zawartej na stronie nr. 6
3 • Installing the Blade Irons 3-1. Turn the fan upside down. Use the ceiling fan package to support the fan while assembling the blade irons. 3-2. Loosen all of the blade iron assembly screws. Do not completely remove the screws. 3-3. Remove and discard all of the shipping blocks. 3-4. Slide the blade iron under the switch housing plate, aligning the two notches with the two blade iron assembly screws. 3-5. To engage the blade iron fully, pull the blade forward under the loosened blade
Streszczenie treści zawartej na stronie nr. 7
4 • Assembling and Hanging the Fan You can assemble your fan for standard mounting (steps 4-1 – 4-3) or Step 4-1 Pipe Ball Screw for low profile mounting (steps 4-4 – 4-6). 4-1. If your ceiling is 9’ or higher, remove the 3” downrod pipe from the black ball. Remove the screw and push the pipe up through the ball. Remove the cross bar. read the cross bar through the Ground Wire and Screw longer (6”) pipe and insert the pipe into the black ball. Tighten the Pin screw completely. 4-2. Inse
Streszczenie treści zawartej na stronie nr. 8
5 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 5-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 5-2. Connect the wires as follows: connect the green ground wire to the gro
Streszczenie treści zawartej na stronie nr. 9
6 • Installing the Canopy and Canopy Trim Ring Step 6-2 6-1. Holding the canopy, raise the fan off the hook. Ceiling Plate 6-2. Align the slots in the canopy with the tabs on the ceiling plate. 6-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 6-4. Loosely assemble the three canopy screws into the canopy one at Canopy Trim Canopy Ring a time. Once all three screws are in, tighten the
Streszczenie treści zawartej na stronie nr. 10
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Your fan may include blade grommets. If your fan has grommets, Step 7-1 (Detail) insert them by hand into the holes on the blades. 7-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal. Blade Assembly Screws Use with grommet Grommet 10 11 Steps 7-1
Streszczenie treści zawartej na stronie nr. 11
8 • Installing the Switch Housing 8-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. 8-2. Feed the upper plug connector through the center opening of the housing. 8-3. Align the keyhole slots in the housing with the housing assembly screws. 8-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining housing assembly scre
Streszczenie treści zawartej na stronie nr. 12
9 • Operating and Cleaning Your Ceiling Fan 9-1. Turn on electrical power to the fan. 9-2. e fan pull chain controls power to the fan. e pull chain has four settings in sequence: High, Medium, Low and Off . • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • e chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 9-3. Ceiling fans work best by
Streszczenie treści zawartej na stronie nr. 13
Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling e air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can cut back on expensive air conditioning...and save up to 40%* on cooling. In winter, your Hunter fan recirculates warm air and saves up to 10%* on heating bills. * On average at low speed settings. Your sa
Streszczenie treści zawartej na stronie nr. 14
10 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch fi rmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Chec
