Streszczenie treści zawartej na stronie nr. 1
COMBINATION
PICNIC TABLE - BENCH
Model 97736
AssEMBLy & sET-UP INsTrUCTIONs
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sAVE THIs MANUAL
Streszczenie treści zawartej na stronie nr. 2
NOTICE is used to sAVE THIs MANUAL Notice address practices Keep this manual for the safety warnings not related to and precautions, assembly, operating, inspection, personal injury. maintenance and cleaning procedures. Write the CAUTION, without product’s serial number in the back of the manual CAUTION the safety alert near the end of this manual (or month and year of symbol, is used to purchase if product has no number). Keep this address practices not related to manual and th
Streszczenie treści zawartej na stronie nr. 3
7. Never allow people or animals to stand AssEMBLy or climb on this product. 8. Pinch point warning: Use caution to Note: For additional information regarding the avoid pinching fingers when assembling parts listed in the following pages, refer to the and setting up this unit. accompanying illustrations. 9. Adults only should perform the assembly 1. Attach the two Folding Beams (2) flush to and set-up of this product. the inner side of the Table Top (5), using six Bolts each with two Wa
Streszczenie treści zawartej na stronie nr. 4
5. Turn the assembled Bench upside down. 10. Hold the Table securely in its standing position. 6. Position the Diagonal Supports (7) so one end is against the longer cross 11. Attach the two Table Legs (1) to the beam of Bench Support (4) legs. Then Table Top (5) by inserting two Bolts align the other end so it is flush to the each, with four Washers and one Nut wood edge next to the center gap of the (10) into the pre-drilled hole at the Short Bench Top (8). The two Diagonal rounded end
Streszczenie treści zawartej na stronie nr. 5
LONG BENCH FIGUrE G sCrEWs (11) TOP INsPECTION AND (6) MAINTENANCE 1. PErIODICALL y, inspect the general condition of the Picnic Table/Bench. Check for loose connections, improper weight distribution, and any other TABLE LEG condition that may affect the product’s (1) operation. 15. To transform the Picnic Table into a 2. TO CLEAN, use a damp cloth with a Bench, simply lift up the Table Top (5) mild detergent. Then dry. Do not use and Arm Rests (3). solvents. (see Figures H, I, and
Streszczenie treści zawartej na stronie nr. 6
PArTs LIsT & AssEMBL y DIAGrAM Part # Description Qty. Part # Description Qty. 1 Table Leg 2 7 Diagonal Support 2 2 Folding Beam 2 8 Short Bench Top 1 3 Arm Rest 2 9 Bolt w/Two Washers & One Nut 6 4 Bench Support 2 10 Bolt w/Four Washers & One Nut 6 5 Table Top 1 11 Screw 22 6 Long Bench Top 1 2 1 3 4 9 5 10 7 11 6 8 SKU 97736 For technical questions, please call 1-800-444-3353. Page 6
Streszczenie treści zawartej na stronie nr. 7
LIMITED 90 DAy WArrANTy Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installati
