Instrukcja obsługi Grizzly G0624

Instrukcja obsługi dla urządzenia Grizzly G0624

Urządzenie: Grizzly G0624
Kategoria: Tokarka
Producent: Grizzly
Rozmiar: 5.32 MB
Data dodania: 4/14/2014
Liczba stron: 36
Drukuj instrukcję

Pobierz

Jak korzystać?

Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia Grizzly G0624. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z Grizzly G0624.

Dla Twojej wygody

Jeżeli przeglądanie instrukcji Grizzly G0624 bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:

  • Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji Grizzly G0624 na pełnym ekranie, użyj przycisku Pełny ekran.
  • Pobranie na komputer - Możesz również pobrać instrukcję Grizzly G0624 na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
Grizzly G0624 Instrukcja obsługi - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Wersja drukowana

Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji Grizzly G0624 a jedynie wybrane strony. Szanuj papier.

Streszczenia

Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do Grizzly G0624. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.

Streszczenia treści
Streszczenie treści zawartej na stronie nr. 1

MODEL G0624
10" BENCHTOP LATHE
OWNER'S MANUAL
Model G0624 shown with optional Model G0625 Bed Extension.
COPYRIGHT © NOVEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL86839 PRINTED IN CHINA

Streszczenie treści zawartej na stronie nr. 2

����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ������������������������������������������������������������������ �������������������������������������������������������������������� ���������������������������������������������������������������

Streszczenie treści zawartej na stronie nr. 3

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .................................................................................................................................... 2 Contact Info ................................................................................................................................ 2 Machine Data Sheet ................................

Streszczenie treści zawartej na stronie nr. 4

INTRODUCTION Foreword Contact Info If you have any comments regarding this manual, We are proud to offer the Model G0624 10" please write to us at the address below: Benchtop Lathe. This machine is part of a grow- ing Grizzly family of fine woodworking machinery. Grizzly Industrial, Inc. When used according to the guidelines set forth in C /O Technical Documentation Manager this manual, you can expect years of trouble-free, P.O. Box 2069 enjoyable operation and proof of Grizzly’s com- Belli

Streszczenie treści zawartej na stronie nr. 5

Machine Data Sheet � � � � � � �� � � � �� � � � � � � � �� � � � �� �� � � � � �� � �� � � � � �� � � � � � � � �� �� � �� � � � � �� � � � � �� � � � � �� � � � � � � � �� �� � � �� � �� � � � � �� � � � � � � � � ������ ������ ���� ����� ����� ��������� �� ��� �������� ����������� � ������� ��������������������������������������������������������������� ������������������������������������������������������������������������������������������������� ��� ���� � � � � �������������������� �����

Streszczenie treści zawartej na stronie nr. 6

� � ���������������� ������� ������������������������������������������������������������������������������������������������������������������������������ �� � �� � � ���������� ����� ������������������������������������������������������������������������������������������������������������������������������ �� � ������������������ � ���� ������������� ������������������������������������������������������������������������������������������������������������������������������ ����� ���� ��� �

Streszczenie treści zawartej na stronie nr. 7

Identification L M K D E J C G N H B I A F O U P Q T S R Figure 1. Model G0624 identification. K. Live Center A. Belt Tension Lock Knob L. Quill Lock Handle B. Belt Cover Lock Handle M. Quill Handwheel C. Belt Cover N. Tailstock D. Headstock O. Bed Extension (optional) E. Faceplate P. ON/OFF Switch F. Tool Rest Base Q. Lathe Bed G. Tool Rest R. Motor H. Tool Rest Lock Handle S. Belt Tension Lever I. Tool Rest Release Lever T. Foot J. Tailstock Release Lever U. Safety Key -5- G0624 10" Benchtop

Streszczenie treści zawartej na stronie nr. 8

� � � �� � �� � �� � � � �� � � � �� � � � �� � � �� � � � � � � �� � � � �� � � � � � � �� � � �� � � � � � �� � � � � ��� � � � � � � � � �� � � � �� � � � � � � � � � �� � � � � � � �� � �� � � � � � �� � � � � � � �� � �� � �� � � � � � � �� � �� �� � � � � � � � � �� � �� � � � � � � � �� � � � � � � ���� � � � � �� � � � � �� � � � �� � � � � � �� �� � �� �� � � � � � �� � �� � � � � � � �� � � �� � � � � � �� � � � � �� � � � � � � � �� � �� � � � � � �� � � �� � � � � �� � �� � � � � � �

Streszczenie treści zawartej na stronie nr. 9

� � � � � �� � � � � � � �� � � � �� � � �� � � � � � � � � � ��� ����� ������ �������� ���� ���� � ���� � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� ���������� ����� �� ������ ��� ��������� ���� � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � ����� ���� ���������� ��������� ������� ���� � ���������� ������������� ���� ����� ���� �������� ���� ���������� �� � ����������� ���� � � � � � � � � � � � � � � � � � � � � � � �

Streszczenie treści zawartej na stronie nr. 10

Additional Safety for Wood Lathes 9. OPERATING DAMAGED LATHE. Never 1. KEEPING GUARDS IN PLACE. Make sure operate the lathe with damaged or worn all guards are in place and that the lathe sits parts. on a flat, stable surface. 10. ADJUSTMENTS/MAINTENANCE. Make 2. EYE/FACE PROTECTION. Always wear sure your wood lathe is turned OFF, dis- eye protection or a face shield when operat- connected from its power source, and all ing the lathe. moving parts have come to a complete stop before st

Streszczenie treści zawartej na stronie nr. 11

SECTION 2: CIRCUIT REQUIREMENTS 110V Operation Electrocution or fire could result if this machine is not grounded correctly or if your electrical configu- Serious personal injury could occur if you ration does not comply connect the machine to the power source with local and state codes. before you have completed the set up pro- Ensure compliance by cess. DO NOT connect the machine to the checking with a qualified power source until instructed to do so. electrician! Amperage Draw The M

Streszczenie treści zawartej na stronie nr. 12

SECTION 3: SET UP Set Up Safety Unpacking The Model G0624 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, This machine presents please immediately call Customer Service at serious injury hazards (570) 546-9663 for advice. to untrained users. Read through this entire manu- Save the containers and all packing materials for al to become familiar with possible inspection by the carrier or its agent. the controls a

Streszczenie treści zawartej na stronie nr. 13

Clean Up Site Considerations The unpainted surfaces are coated with a waxy Floor Load oil to prevent corrosion during shipment. Remove Refer to the Machine Data Sheet for the weight this protective coating with a solvent cleaner or and footprint specifications of your machine. citrus-based degreaser such as Grizzly’s G7895 Some workbenches may require additional rein- Citrus Degreaser. To clean thoroughly, some parts forcement to support both the machine and the must be removed. For opti

Streszczenie treści zawartej na stronie nr. 14

Assembly Test Run To install the tool rest: Once the assembly is complete, test run your machine to make sure it runs properly and is 1. Turn the release lever on the tool rest base ready for regular operation. so it does not interfere with assembly. The test run consists of verifying the following: 1) 2. Thread the tool rest lock handles into the tool The motor powers up and runs correctly, and 2) rest base (Figure 6) until the threaded ends the safety paddle switch works correctly. of th

Streszczenie treści zawartej na stronie nr. 15

SECTION 4: OPERATIONS Belt Operation Safety Cover Lock Handle Damage to your eyes and lungs could result Access from using this machine without proper pro- Plate tective gear. Always wear safety glasses and a respirator when operating this machine. Belt Tension Belt Tension Lock Knob Lever Loose hair and cloth- Figure 8. Belt access. ing could get caught in machinery and cause seri- 2. Loosen the belt tension lock knob, and move ous personal injury. Keep the belt tension lever up to re

Streszczenie treści zawartej na stronie nr. 16

Adjusting Tailstock Adjusting Tool Rest The tailstock is equipped with a cam-action The tool rest is equipped with a cam-action clamping system to secure it to the lathe bed. clamping system to secure it to the lathe bed. When the lever is tightened, a locking plate lifts When the lever is engaged, a locking plate lifts up and secures the tool rest to the bed. up and secures the tool rest base to the bed. To position the tailstock along the bed: To position the tool rest base along the

Streszczenie treści zawartej na stronie nr. 17

Installing/Removing Spur Center The spur center installs into the headstock spin- dle with a taper fit. To install the spur center: 1. UNPLUG LATHE FROM POWER! 2. Insert the tapered end of the center into the spindle, and push it in quickly and firmly (see Figure 13. Removing spur center using the Figure 12). knock out bar. Installing/Removing Live Center To install the live center: 1. Loosen the quill lock handle (if locked) approximately half a turn counterclockwise. 2. Rotate the quill

Streszczenie treści zawartej na stronie nr. 18

To remove the live center: 1. Turn the quill handwheel counterclockwise until the tailstock quill bottoms out, causing the center to be forced out of the quill. The tailstock quill lock handle must always be locked down while the lathe is in use. The workpiece can be thrown from the lathe if this step is not observed. Also, the tailstock quill should not protrude from the tailstock housing more than 2'' or the quill will not be Figure 15. Tightening faceplate. supported enough. Failure

Streszczenie treści zawartej na stronie nr. 19

Figure 17 shows an example of a skew chisel. Spindle Turning Spindle turning (Figure 20) is the operation per- formed when a workpiece is mounted between the headstock and the tailstock. Figure 17. Skew chisel. • Scrapers—Mainly used where access for other tools is limited, such as hollowing oper- ations. This is a flat, double-ground tool that comes in a variety of profiles (Round Nose, Spear Point, Square Nose, etc.) to match many different contours. Figure 18 shows an example of a round

Streszczenie treści zawartej na stronie nr. 20

1 2. Using a wood mallet, tap the point of the spur 9. Position the tool rest approximately ⁄4" away 1 center into the center of the workpiece, so from the workpiece and approximately ⁄8" that it leaves a center mark, then remove the above the center line, as shown in Figure spur center. 23. 1 3 3. Using a ⁄8" drill bit, drill a ⁄16" deep hole at the center mark. 4. Cut the corners off your workpiece if it is over ��������� 2" x 2" to make turning safer and easier. ���� ��������� 5. Drive t


Podobne instrukcje
# Instrukcja obsługi Kategoria Pobierz
1 Grizzly G0509G Instrukcja obsługi Tokarka 24
2 Grizzly G0516 Instrukcja obsługi Tokarka 18
3 Grizzly G0456 Instrukcja obsługi Tokarka 1
4 Grizzly G0509 Instrukcja obsługi Tokarka 3
5 Grizzly G0584 Instrukcja obsługi Tokarka 2
6 Grizzly G0602 Instrukcja obsługi Tokarka 30
7 Grizzly G0554Z Instrukcja obsługi Tokarka 3
8 Grizzly G0653 Instrukcja obsługi Tokarka 0
9 Grizzly G0657 Instrukcja obsługi Tokarka 1
10 Grizzly G0658 Instrukcja obsługi Tokarka 0
11 Grizzly G0657/G0658 Instrukcja obsługi Tokarka 1
12 Grizzly G0698 Instrukcja obsługi Tokarka 2
13 Grizzly G0694 Instrukcja obsługi Tokarka 0
14 Grizzly G0733 Instrukcja obsługi Tokarka 10
15 Grizzly G0709 Instrukcja obsługi Tokarka 15
16 Edelbrock 1551 Instrukcja obsługi Tokarka 0
17 Bushnell 26-0100/26-0102 Instrukcja obsługi Tokarka 1
18 Delta 46-715 Instrukcja obsługi Tokarka 10
19 Delta 434-08-651-0006 Instrukcja obsługi Tokarka 0
20 Delta 46-705 Instrukcja obsługi Tokarka 0