Streszczenie treści zawartej na stronie nr. 4
• When operating a power tool outdoors, use an Safety instructions outdoor extension cord suitable for outdoor use. WARNING. Read and understand all instructions. Use of a cord suitable for outdoor use reduces the risk of Failure to follow all instructions listed below may result in electric shock. electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains- Personal safety operated (corded) power tool or battery-operated (cordless)
Streszczenie treści zawartej na stronie nr. 5
Power tool use and care Service • Do not force the power tool. Use the correct power tool • Have your power tool serviced by a qualified repair for your application. The correct power tool will do the job personnel using only identical replacement parts. better and safer at the rate for which it was designed. This will ensure that the safety of the power tool is maintained. • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled Addit
Streszczenie treści zawartej na stronie nr. 6
• Periodically check that all nuts, bolts and other fixings are Contents of carton properly tightened. • Auxiliary handle • When using the drill, use safety equipment including • Depth gauge safety glasses or shield, ear protectors, and protective clothing including safety gloves. Wear a dust mask if the • 100 Drill and Bit accessories drilling operation creates dust. 12 x HSS drill bits If in doubt, do not plug in the tool. Using a power source - 2 each of 2mm, 3mm, 4mm, 5mm, 5.5m
Streszczenie treści zawartej na stronie nr. 7
Know your product 1. Keyless chuck 2. Auxiliary handle 3. Depth gauge 4. Drilling/hammer mode selector 5. Lock-on button 6. Forward/Reverse selector 9 4 6 7. Variable speed trigger switch 8. Speed dial 9. Spindle lock button 3 1 5 8 7 2 7
Streszczenie treści zawartej na stronie nr. 8
Auxiliary handle and Inserting and depth gauge removing bits 1. Turn the auxiliary handle (2) CAUTION. Always ensure that anti-clockwise to loosen the the drill is switched off and collar and slip it over the chuck the plug is removed from the onto the drill. power point before making any adjustments. 2. Insert the depth gauge (3) in the hole at the top of the The drill is fitted with a keyless handle (2). chuck for easier tightening and more grip torque. 3. T he auxiliary h
Streszczenie treści zawartej na stronie nr. 9
Operation Reversing the direction Starting and stopping of rotation Operational controls 1. Operate the forward/reverse selector (6) on the top of 1. Ensure that the tool is in the drill. good condition. 2. Push the selector to the 2. Plug the cordset into the position for forward action. mains socket. 3. Push the selector to the 3. Depress the trigger switch (7) position for reverse action. to start the drill and release the trigger when you wish to stop. CAUTION. Any attem
Streszczenie treści zawartej na stronie nr. 10
Chuck replacement Hints for use Always wear eye protection. NOTE. When drilling into masonry the drilling rate is fast and burnout of the tip will occur if the drill bit is not Chuck removal constantly cleared. The chucks of reversible drills are always fixed by a screw • Use only correctly sharpened drill bits, which are suitable with left-hand thread. The screw, which is located in the for the material being drilled. centre of the chuck, must be removed before the chuck can • To drill
Streszczenie treści zawartej na stronie nr. 11
Wood drilling Masonry drilling • For maximum performance, use high speed steel bits for • For maximum performance use tungsten carbide-tipped wood drilling. masonry impact bits when drilling holes in brick, tile, concrete, etc. • Move drilling mode selector to drilling mode . • Move drilling mode selector to hammer mode . • Secure the workpiece to prevent it from turning when drilling. • Apply light pressure and medium speed for best results in brick. • Begin drilling at a very low speed
Streszczenie treści zawartej na stronie nr. 12
Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: GMC Product Type GMC Product Code A GMC Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone. You are welcome to use this phone-in service to make sugg
Streszczenie treści zawartej na stronie nr. 1
1000W 13mm
HAMMER DRILL
MX1G100
INSTRUCTION MANUAL
Black Magenta
Code: MX1G100
Cyan Yellow
Date: 060223 Edition: 07 Op: DCR
Streszczenie treści zawartej na stronie nr. 2
Contents Warranty 2 Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete Description of symbols 3 satisfaction with this tool, occasionally, due to the mass Specifications 3 manufacturing techniques, a tool may not live up to our Safety instructions 4 required level of performance and you may need the assistance of our service department. Additional safety rules for drills 5 This product is warranted for a 2-year period for home Contents of carton 6 domestic us
Streszczenie treści zawartej na stronie nr. 3
Dear Customer Description of symbols If you require any help with your product, whether it � The rating plate on your tool may show symbols. These is a Warranty claim, spare part or user information, � represent important information about the product or please phone our Help Line for an immediate response. instructions on its use. Phone 1300 880 001 in Australia or � Wear hearing protection. 0800 445 721 in New Zealand. Wear eye protection. Wear breathing protection. Introduc