Streszczenie treści zawartej na stronie nr. 1
Product features and decoration may vary from the picture above.
Jeep Wrangler
®
Owner’s Manual with Assembly Instructions
Please read this manual and save it with your original sales receipt.
For Model 74020
Tools needed for assembly: Phillips Screwdriver, Hammer, and Safety Scissors (not included).
®
Use only with a Power Wheels 12 Volt Lead-acid Rechargeable Battery and
®
a Power Wheels 12 Volt Charger with Type “12V” Connector (included).
Streszczenie treści zawartej na stronie nr. 2
Table of Contents A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 3
Warnings B WARNING • Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. • Keep small parts and plastic bags out of children’s reach. Dispose of plastic bags properly. • Adult supervision is required. Children do not have the judgement necessary to avoid many accident
Streszczenie treści zawartej na stronie nr. 4
Pb Parts C • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Windshield Hinge Pin - 2 Windshield Brack
Streszczenie treści zawartej na stronie nr. 5
Parts 1 1 1 /2" x /4" Machine Screw - 2 Dashboard Knob – 2 Hood Latch – 2 1 #8 x 1" Screw – 11 #8 x1 /4" Screw – 10 1 2 #10 x / " Screw – 2 #10 x 1" Screw – 2 Key Assembly Knob Plate 1 2 #6 x 1 / " Screw – 4 All Screws Shown .354 Cap Nut – 3* *For your convenience, an extra .354 cap nut Actual Size has been included. Windshield (Front Half) Vehicle Body Seat Windshield (Back Half) Steering Column Hood Dash Sport Bar Support - 2 Sport Bar Steering Wheel Sport Bar Bracket Set Not Shown: Label
Streszczenie treści zawartej na stronie nr. 6
Parts Diagram D 29 15 33 7 15 28 33 36 32 35 10 32 21 31 20 3 37 31 23 38 30 37 24 10 19 17 18 13 22 16 27 12 10 14 6 11 10 13 4 8 9 5 25 26 1 34 2 3 6
Streszczenie treści zawartej na stronie nr. 7
Parts Diagram No. Part Quantity No. Part Quantity 1 Vehicle Body 1 20 Steering Wheel 1 2 Steering Column 1 21 Steering Wheel Cap 1 3 .354 Cap Nut 2 22 Seat 1 4 Hood Latch 2 23 Long Seat Belt Strap 1 5 12 Volt Battery 1 24 Short Seat Belt Strap 2 6 Battery Retainer 1 25 Headlight Lens 2 7 Light Cover 2 26 Lens Guard 2 8 Taillight Lens 2 27 Hood 1 9 Taillight Housing 2 28 Windshield, Front 1 10 #8 x 1" Screw 11 29 Windshield, Back 1 11 Gas Cap 1 30 Sport Bar 1 12 Dash 1 31 Sport Bar Support 2 13 #
Streszczenie treści zawartej na stronie nr. 8
Battery Charging E About Thermal Fuses ® WARNING Your Power Wheels 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resetting safety device which automatically “trips” and shuts down • The battery must be handled by adults operation of the vehicle if the vehicle is overloaded or the only. The battery is heavy and contains driving conditions too severe. Once a fuse has “tripped”, it sulfuric acid (electrolyte). Dropping the will automatically reset itself after
Streszczenie treści zawartej na stronie nr. 9
Pb Battery Charging Important Notes • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • You do not need to remove the battery from your vehicle to recharge it. 2 Battery • The battery must be upright while charging. 11 • The charger is not a toy. • Do not short circuit the battery. • We recommend that you start charging your battery 1 before beginning assembly of your new vehicle. 11 • Before charging the battery, examine the battery
Streszczenie treści zawartej na stronie nr. 10
Assembly F Dash Dash Knob Plate 2 1 1 3 Pocket 2 1 Tab Key Assembly Channel Cover Microphone T-End Cord 1 2 • Bend the end of the microphone cord sothat it forms a “T”. • Position the dash on the vehicle body. Make sure the • Insert the end of the microphone cord through the square holes in the dash tabs align with the holes in the vehicle opening in the dash pocket. Pull gently on the cord to make body and that the channel cover is captured by the dash. sure it is secure in the dash. • Insert t
Streszczenie treści zawartej na stronie nr. 11
Assembly Steering Wheel Hole 7 5 Tab Steering Column Cap Nut Steering Column “UP” Bottom View • Turn the vehicle body upright. • Wipe the steering column with a paper towel to remove • Position the steering wheel so that the spokes form a any excess lubricant. “Y” as shown. The tab on the steering wheel stem • Turn the vehicle body on its side. should face up. • Insert the straight end of the steering column up through • Fit the steering wheel onto the steering column. the hole in the vehicle b
Streszczenie treści zawartej na stronie nr. 12
Assembly Wide Tab Wide Notch 11 9 Hood Latch Lens Hole Lens Guard Hood Latch • Fit the wide notch in the side of a headlight lens under Hole the wide tab on a lens guard. • Press firmly on the inside of the headlight lens to snap it • Insert a hood latch into one of the holes in the vehicle into the lens guard. body, near the hood area. • Repeat this procedure to assemble the other headlight 1 • Twist the base of the hood latch /4 turn to secure it in lens to the remaining lens guard. the vehicl
Streszczenie treści zawartej na stronie nr. 13
Assembly Windshield #8 x 1" Screws #8 x 1" Screws Hinge Pin Frame - 15 13 Windshield Front Half Brackets Windshield Bracket Lip of Bracket • Rotate the front half of the windshield frame down so it Slot lays flat on the vehicle body. • Working from the center of the vehicle, insert a hinge pin through the holes in the windshield frame and the holes • Fit the screw pegs on the windshield brackets into the in a windshield bracket, as shown. holes in the top surface of the dash. Press firmly to fit
Streszczenie treści zawartej na stronie nr. 14
Assembly Short Seat T-Loop (Pull through slot) Belt Strap 19 Seat 17 Seat Back Tabs Fastener End End T-Loops Tabs 3 PUSH Slot HERE 11 2 Seat Slot Slot 1 • Turn the seat upside down. • Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the • With the seat at an angle, insert the tabs on the front side of the seat belt with the fastener faces the outer edge of the seat into the slots in the foot-well wall 1 . edge of the seat. 11 • Push
Streszczenie treści zawartej na stronie nr. 15
Assembly TM KC Light Rack - Back Half 21 23 Sport Bar Bracket Tabs Ring Sport Bar Tab Sport Bar Support Sport Bar Hole TM KC Light Rack - Side Leg Front Half • Using safety scissors, remove the sport bar brackets • Position the sport bar with the ends on a flat surface, from the plastic connector. Dispose of the plastic as shown. connector. TM • Fit and hold the front and back halves of the KC light • Position the sport bar upright. TM rack against the sport bar. Make sure the two KC light • Po
Streszczenie treści zawartej na stronie nr. 16
Assembly 25 27 Taillight Sport Bar Housing PUSH HERE Side Fender Taillight Lens PULL HERE • Using safety scissors, remove the taillight lenses and the taillight housings from the plastic connectors. Dispose of the plastic connectors. • Face the rear of the vehicle. • Fit a taillight lens inside a taillight housing. • Fit the sport bar and sport bar support legs into the holes in the vehicle body. • Position the taillight housing with lens against the vehicle body with the screw holes aligned, a
Streszczenie treści zawartej na stronie nr. 17
Label Decoration G Proper label application will help to keep the labels 26 26 looking their best! When applying labels, keep the 27 18 ® following guidelines in mind: • Wash your hands before applying the labels. 2 14 • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has 22 28 been applied to the vehicle. • After apply
Streszczenie treści zawartej na stronie nr. 18
Pb Pb Pb Battery Installation H ® Important Note: Use only a Power Wheels 12 volt battery. Use of any other battery will damage your vehicle. Make Battery Retainer sure that you charge the battery for at least 18 hours using 3 1 Looped End ® the enclosed Power Wheels 12 volt charger before operating your vehicle for the first time. Charge the battery Slot for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructions may d
Streszczenie treści zawartej na stronie nr. 19
Battery Installation Battery Care and Disposal Care Hood If a battery leak develops, avoid contact with the leaking 5 acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician. If acid is internally ingested, give water, milk of magnesia or egg whites immediately. Never give emetics or induce vomiting. Call a physician. • Charge a new battery for a
Streszczenie treści zawartej na stronie nr. 20
Rules for Safe Driving J • While driving across a steep slope, the vehicle may tilt and tip over. The wheels could lose traction, WARNING causing the vehicle to slip. • While driving up a steep incline, the motor may stop • Adult supervision is required. Children do and the vehicle could roll backwards at an unsafe speed. not have the judgement necessary to avoid many accidents. Be sure that children operating this vehicle can do so safely and that they are supervised at all times. • Never use
