Streszczenie treści zawartej na stronie nr. 1
POWER EDGER ATTACHMENT
1
OPERATOR'S MANUAL
Power Edger Attachment
Operator's Manual
MODEL 99944200470
Serial Number 001001 - 057000
MODELS USED ON: SRM-2100SB/2400SB
SRM-210SB/211SB
SRM-260SB/261SB
PAS 2100/2400
PAS 210/211
PAS 230/231
PAS 260/261
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual Pro Attachment Series power source or Split
Boom Trimmer. Those manuals and this manual must be read and understoo
Streszczenie treści zawartej na stronie nr. 2
2 INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operating tips and SAFETY messages. THE OPERATOR'S MANUAL Contains specifications and information for operation, starting, stopping, maintenance, storage and assembly specific to this product. THE SAFETY MANUAL Contain
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT POWER EDGER ATTACHMENT 3 OPERATOR'S MANUAL MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystander
Streszczenie treści zawartej na stronie nr. 4
4 INTERNATIONAL SYMBOLS Symbol Symbol Symbol Symbol Symbol form/shape Symbol form/shape Symbol form/shape Symbol form/shape description/application description/ description/application description/ application application Read and understand Fuel and oil mixture Keep feet away Operator's Manual. Direction of from blade blade Wear eyes, ears and Finger Severing head protection Thrown Emergency stop objects Wear hand Hot Surface protection. Use two handed. Wear slip resistant Engine choke foot wea
Streszczenie treści zawartej na stronie nr. 5
POWER EDGER ATTACHMENT 5 OPERATOR'S MANUAL EXTENDED OPERATION/EXTREME CONDITIONS Vibration and Cold -- To reduce the risk of RSI/CTS, do the It is believed that a condition called Raynaud’s Phenomenon, which following: affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold may Avoid using your wrist in a bent, extended cause tingling and burning sensations followed by loss of color and or twisted position. Instead try t
Streszczenie treści zawartej na stronie nr. 6
6 SAFE OPERATION Provide Safety And Operating Instructions To All Operators Provide all users of this equipment with the Operator's Manual and Safety Manual for instructions on Safe Operation. Keep A Firm Grip Hold the front and rear handles with both hands with thumbs and fingers encircling the handles Keep A Solid Stance Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. DESCR
Streszczenie treści zawartej na stronie nr. 7
POWER EDGER ATTACHMENT 7 OPERATOR'S MANUAL SPECIFICATIONS MODEL ----------------------------------------------------- POWER EDGER ATTACHMENT Shaft Length ------------------------------------------------ 845 mm (33.25in.) Attachment Width ----------------------------------------- 165.1 mm (6.50 in.) Attachment Height ---------------------------------------- 552.45 mm (21.75 in.) Weight w/blade -------------------------------------------- 2.3 kg (4.96 lb.) Drive Shaft Type ------------------------
Streszczenie treści zawartej na stronie nr. 8
8 4. Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft D hole. Insure locator pin is fully engaged by twisting lower drive C shaft. Locator pin should snap flush in coupler. Full engagement will prevent further shaft rotation. 5. Secure lower shaft assembly to coupler by tightening clamping knob (D). E OPERATION NOTE Refer to your Pro Attachment Series Operator's Manual for correct engine fueling, starting and stopping instructions. Operating Techniques 1. Before edging, water the
Streszczenie treści zawartej na stronie nr. 9
POWER EDGER ATTACHMENT 9 OPERATOR'S MANUAL 4. Adjust the blade's depth of cut to produce a fine cut between ADJUSTMENT sidewalk and grass using a minimum blade depth, usually with WHEEL KNOB about 13 mm (1/2 in.) of the blade into the ground. INCREASE 5. Before edging, plan your direction of travel so that the unit will DEPTH always be positioned on your right side and so that you walk on a hard surface whenever possible. DECREASE 6. Hold edger as shown. DEPTH 1/2 in. WARNING DANGER Before
Streszczenie treści zawartej na stronie nr. 10
10 BLADE REPLACEMENT/LUBRICATION Level 1. Tools Required: Scrench, Locking Tool, Needle Nose Pliers, 8 mm Open End Wrench, Grease Gun TM Parts Required: ECHO LUBE 8 oz. (P/N 91014) or Lithium Base ® Grease, Blade P/N 69601552632 Gear Case NOTE Grease gear case every 50 hours of use. Replace blade when it is worn shorter than 6 in. Remove blade and holders before greasing to prevent damage to gear and bearings. 1. Shut engine off. 2. Remove split pin (A). 3. Rotate blade until holes in inner blad
Streszczenie treści zawartej na stronie nr. 11
POWER EDGER ATTACHMENT 11 OPERATOR'S MANUAL Drive Shaft (Lower) IMPORTANT Lower and upper drive shaft must be lubricated with high A temperature automotive grease every 25 hours of operation, B otherwise drive shaft assembly overheating and failure can result. 1. Loosen two (2) screws (A) and remove center locating screw (B). Pull gear box and shield from drive shaft housing. 2. Pull flexible cable (C) from the drive shaft housing, wipe clean and TM re-coat with a thin coating [15 ml (1/2 oz.)]
Streszczenie treści zawartej na stronie nr. 12
SERVICING INFORMATION PARTS Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the attachment with you. You can find these numbers on the driveshaft model/serial number label. For future reference, write them in the space provided below. Model No. ____________ SN. __________ DEALER? SERVICE Call Service of this product during the war
Streszczenie treści zawartej na stronie nr. 13
SUPPLEMENT TO OPERATOR'S MANUAL PART NUMBER X7532278700 (X753001210) FOR MODEL: POWER EDGER ATTACHMENT P/N 99944200470 S/N 001001 & UP This Supplement contains important information. Please keep with your Operator's Manual. Your unit was manufactured using Echos new open-face, all-metal blade guard, and improved heavy-duty gear case. Specification (Pg. 7) Gear Ratio ----------------------------- 2.07:1 Gear Case Weight w/Blade ---------------------- 2.54 kg (5.6 lbs.) NOTE: Grease gear case
