Streszczenie treści zawartej na stronie nr. 1
INSTRUCTION MANUAL
CHAIN SAW
CS-500P
WARNING
Read the instructions carefully and follow the rules for safe
operation.
Failure to do so could result in serious injury.
ECHO, INCORPORATED
X750-017 71 0
400 Oakwood Road, Lake Zurich, Illinois 60047-1564
X750 331-000 0
Phone : 847-540-8400
Printed in Japan 1012G 1541 ES
Streszczenie treści zawartej na stronie nr. 2
WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Copyright © 2010 All Rights Reserved.
Streszczenie treści zawartej na stronie nr. 3
RULES FOR SAFE OPERATION A. Kickback Safety Precautions for Chain Saw Users WARNING! KICKBACK may occur when the nose or 1.With a basic understanding of tip of the guide bar touches an object, or kickback, you can reduce or eliminate when the wood closes in and pinches the the element of surprise. saw chain in the cut. Sudden surprise contributes to accidents. Tip contact in some cases may cause a 2.Keep a good firm grip on the saw with lightning fast reverse REACTION, Kicking both hands, the
Streszczenie treści zawartej na stronie nr. 4
B. Other Safety Precautions 1. Do not operate a chain saw with one 11.Shut off the engine before setting the hand! Serious injury to the operator, chain saw down. helpers, bystanders, or any 12.Use extreme caution when cutting combination of these persons may small size brush and saplings because result from one-handed operation. slender material may catch the saw A chain saw is intended for two- chain and be whipped toward you or handed use. pull you off balance. 2.Do not operate a chain saw
Streszczenie treści zawartej na stronie nr. 5
CONTENTS RULES FOR SAFE OPERATION ............................................................................. 1 SYMBOLS AND SIGNS ........................................................................................... 3 PACKING LIST ......................................................................................................... 5 NOMENCLATURE OF PARTS ................................................................................. 6 OPERATOR SAFETY................................
Streszczenie treści zawartej na stronie nr. 6
SYMBOL FORM Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application Carefully read the Instruction Chain oil fill manual Wear eyes, ears and head Chain oiler adjustment protection Chain brake operation Carburetor adjustment - Low speed mixture Emergency stop Carburetor adjustment - High speed mixture Choke control “Cold Start” Carburetor adjustment position (choke closed) - Idle speed Oil and gasoline mixture DECALS Part Number X524-003700 Part Number 89
Streszczenie treści zawartej na stronie nr. 7
PACKING LIST The ECHO product you purchased has been After opening the carton, check for damage. factory pre-assembled for your convenience. Due to Immediately notify your retailer or ECHO dealer of packaging restrictions, guide bar and saw chain damaged or missing parts. Use the packing list to installation and other assembly may be necessary. check for missing parts. 13 x 19 mmT-wrench, ECHO chain saw 3 mm and 4 mm Hexagonal Wrench, Small screwdriver Instruction manual Safety manual Guide bar
Streszczenie treści zawartej na stronie nr. 8
NOMENCLATURE OF PARTS 5 1 6 4 7 3 8 11 9 12 10 2 22 Part Number 890191-30131 890191-30131 TO AVOID KICKBACK 21 1. Hold the chain saw firmly with both hands. 2. Don’t let the nose of the guide 20 bar contact any obstruction. 3. Tip contact may suddenly move the 19 X524-003700 guide bar upward and backward, 18 which may cause serious injury. 17 Part Number X524-003700 REPLACEMENT BAR AND CHAIN GUIDE BAR* CHAIN* PART NO. PART NO. 16” 16F0LD3366 20LPX66CQ / 20BPX66CQ 18” 18F0LD3372 20LPX72CQ /
Streszczenie treści zawartej na stronie nr. 9
NOMENCLATURE OF PARTS 1. Instruction manual - Included with unit. 11. Guide bar - The part that supports and guides Read before operation and keep for future the saw chain. reference to learn proper, safe operating 12. Saw chain - Chain, serving as a cutting tool. techniques. 13. Oil tank cap - For closing the oil tank. 2. Safety manual - Describe operating and safety 14. Starter handle - Pull handle slowly until starter instructions for this chain saw. engages then quickly and firmly. When
Streszczenie treści zawartej na stronie nr. 10
OPERATOR SAFETY VIBRATION AND COLD EYE AND HEARING PROTECTION � It is believed that a condition called Raynaud’s � Wear eye protection goggles that meet ANSI Phenomenon, which affects the fingers of certain Z 87.1 requirements. individuals, may be brought about by exposure to Goggles meeting the requirements have the vibration and cold. mark “Z 87” stamped on them. Exposure to vibration and cold may cause � Wear hearing protection. tingling and burning followed by loss of color and If this guide
Streszczenie treści zawartej na stronie nr. 11
Kickback SPARK ARRESTOR MUFFLER � The spark arrestor muffler controls the exhaust This requirement also applies to all U.S. Forest noise and prevents hot, glowing particles of Service lands. carbon from leaving the muffler. In some of these areas, the spark arrestor system Make sure the spark arrestor screen is in good must be certified per USDA Forest Service repair and properly seated in the muffler. Regulation SAE J335. � Certain internal combustion engines operated on Check with your local o
Streszczenie treści zawartej na stronie nr. 12
PREPARATION FOR USE WARNING Saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result. GUIDE BAR AND SAW CHAIN INSTALLATION/REMOVAL 1. Remove spark plug lead. (See page 25) 2. Remove two clutch cover nuts and remove clutch cover. Unlock chain brake Brake lever (Front hand guard) Spiked bumper Two nuts Clutch cover 3. Remove bar and saw chain if necessary. See Clutch Guide bar studs “Maintenance and Care” section for guide bar/ saw chain mainte
Streszczenie treści zawartej na stronie nr. 13
ADJUSTING CHAIN TENSION IMPORTANT Unlock chain brake Always loosen clutch cover nuts before turning the chain tension adjuster, otherwise the clutch cover and tensioner will be damaged. 1. Remove spark plug lead. (See page 25) 2. Unlock chain brake and loosen two clutch cover nuts, if necessary. 3. Hold the bar nose up, and turn the adjuster screw clockwise until chain fits snugly against underside of the bar. Proper tension Improper tension Direction to tension the chain Adjusting screw 4. Tigh
Streszczenie treści zawartej na stronie nr. 14
FUEL AND LUBRICANT FUEL STATEMENT GASOLINE - Use 89 Octane [(R+M)/2] (mid grade WARNING or higher) gasoline or gasohol known to be good Alternative fuels, such as E-20 (20 % quality. ethanol), E-85 (85 % ethanol) or any fuels not Gasohol may contain up to 10 % Ethyl (grain) meeting above requirements are NOT alcohol or 15 % MTBE (methyl teriary-butyl ether). approved for use in ECHO 2-stroke gasoline Gasohol containing methyl (wood) alcohol is NOT engines. approved. Use of alternative fuels m
Streszczenie treści zawartej na stronie nr. 15
HANDLING FUEL MIXING INSTRUCTIONS - DANGER 1. Fill an approved fuel container with half of the Fuel is VERY flammable. Use extreme care required amount of gasoline. when mixing, storing or handling or serious 2. Add the proper amount of two-stroke oil to personal injury may result. gasoline. � Use an approved fuel container. � DO NOT smoke near fuel. 3. Close container and shake to mix oil with � DO NOT allow flames or sparks near fuel. gasoline. � Fuel tanks/cans may be under pressure. 4. Ad
Streszczenie treści zawartej na stronie nr. 16
CHAIN LUBRICANT Proper lubrication of the chain while in operation Cap indication reduces the friction between the chain and the Oil/fuel tanks are indicated by the following guide bar to a minimum and assures a longer illustrations on the caps. service life. � Use bar and chain oil of high quality for this purpose. � Do not use used or reclaimed oil to avoid various oiler problems. � Use ECHO bar and chain oil. � When ECHO bar and chain oil is not available: Use motor oil, etc. � Use bar and ch
Streszczenie treści zawartej na stronie nr. 17
WHEN THE ENGINE IS COLD Chain brake CAUTION Make sure the bar and chain are free from any obstruction when starting the chain saw. � Move chain brake lever fully forward to lock chain brake before starting. Choke � Fill the fuel tank with fuel mixture. It is not permitted to fill fuel above the shoulder Throttle trigger level of fuel tank. Ignition switch lockout � Fill the chain oil tank with lubricant. Do not over fill. Throttle trigger � Move ignition switch to “I” position. � Pull choke c
Streszczenie treści zawartej na stronie nr. 18
RUNNING � When engine starts, keep idling for a few minutes. � Set the brake lever in the unlocked position Unlock chain brake before starting to cut. � Pull throttle trigger gradually and increase revolution of the engine. � The chain starts running when the engine reaches 3900 r/min approximately. � Confirm proper acceleration and lubrication of chain and bar. � Do not run the engine at high speed unnecessarily. � Be sure that saw chain stops moving when throttle trigger is released. STOPPING
Streszczenie treści zawartej na stronie nr. 19
CUTTING INSTRUCTION GENERAL CAUTION � Read the ECHO “CHAIN SAW SAFETY MANUAL” included with your chain saw for additional cutting and safety instructions. � Wear suitable hearing protection such as earmuffs or earplugs to protect against objectionable or uncomfortable loud noises. � Do not let the tip of the bar touch anything while the engine is running. At cutting speed the chain is moving at a high rate of speed. Should the tip contact a limb or log while the chain is moving, the tip will
Streszczenie treści zawartej na stronie nr. 20
FELLING THE TREE A falling tree can seriously damage anything it may hit - a car, a house, a fence, a power-line, or 3 m (10 feet) another tree. There are ways to make a tree fall where you want Retreat Direction of fall it, so first decide where that is! 45° Before cutting, clear the area around the tree. You will need good footing while working and you 45° should be able to work the saw without hitting any obstacles. Next, select a path of retreat. Retreat Not this way When the tree begins to
